Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3 4 5 6   Go Down

Author Topic: See "Posh Box" being built for "nudiefish"  (Read 30211 times)

0 Members and 1 Guest are viewing this topic.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: See "Posh Box" being built for "nudiefish"
« Reply #20 on: June 12, 2013, 11:40:46 AM »

Beautiful Job Johann !!
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: See "Posh Box" being built for "nudiefish"
« Reply #21 on: June 17, 2013, 01:19:21 AM »

Intresting about the Strasser that they are now using balsa and foam it is the first I have heard of any other makers using these material.


They aren`t now but they did experiment with them and other unorthadox materials a few years back

I did forget to mention that Bryan Lafleur in Texas had tried the balsa, and the feed back I had from him was very positive, but my mind had been on the bigger European makers.
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: See "Posh Box" being built for "nudiefish"
« Reply #22 on: June 17, 2013, 01:35:29 AM »

Very nice and interesting report!
Thank you very much for sharing all this interesting information.

Whre are the pictures about ths building process?

---------------------------------------------------------------------------------------------
I did build an other big box this Year.
It is a GCFB Heliconbox all in massive wood. 19,8cm x 36cm 5,2 kg

https://plus.google.com/photos/116672106411032803534/albums/5874487803623754961?banner=pwa

Best regards, Johann Pascher
G;day John fantastic work, I'm impressed with the whole instrument, I find the way you have resolved the treble levers of interest, is there much "bounce" in them or is that resolved?.

Are you seeing any photos at all?  The post has drifted off a little so there has been no new photos with the last couple of posts, but I will remedy that a little later today.
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: See "Posh Box" being built for "nudiefish"
« Reply #23 on: June 17, 2013, 01:59:40 AM »

The “Bass Button Riser” has been blind drilled and then screwed down to the front surface of the accordion frame, I then drill all the way through with a small drill I can then counter sink with the 10mm drill at the back, so when drilling from the front with the 10mm drill I get a good clean exit. There is very good reasons for screwing it down rather than gluing it in place as I will want to be able to remove it later on for various reasons.

I think my titles of photos are getting a little out of sync’, this is just for filing within my file system, but all is self-explanatory.

Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

JohannPascher

  • Good talker
  • **
  • Offline Offline
  • Posts: 55
Re: See "Posh Box" being built for "nudiefish"
« Reply #24 on: June 20, 2013, 07:30:10 PM »

G;day John fantastic work, I'm impressed with the whole instrument, I find the way you have resolved the treble levers of interest, is there much "bounce" in them or is that resolved?.

Are you seeing any photos at all?  The post has drifted off a little so there has been no new photos with the last couple of posts, but I will remedy that a little later today.
This is acually off topic here, and i bette would talk about the things you explain.

The problem with the pictures seams to be solved, id did not change anything and the pictures do show up now.

To the questions:
 is there much "bounce" in them or is that resolved?
No there is not a lot of bounce, sure it is always a compromise. In may case i could  even reduced the bounce if i would not use wood for some parts of the levers. Dimension on the wooden parts is very low in this case.
The treble keyboard is basically conservative and in the traditional way.
The leavers are made up of a wooden and a Aluminum part glued together near where the bearing is placed.
I use plastic bearings within the wooden part. The rods are 1,5mm in diameter. Springs differ on all for rows. Springs are turned by hand with a self made tool. Also important is that the flaps are very light weight.  Fitting the bearings and putting all in a right angle is difficult. All must move easily without having to much play on the other hand. I did make different treble keyboards in the past as well, and all do have pro and contras.


Logged

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: See "Posh Box" being built for "nudiefish"
« Reply #25 on: June 23, 2013, 11:47:13 AM »

G;day John fantastic work, I'm impressed with the whole instrument, I find the way you have resolved the treble levers of interest, is there much "bounce" in them or is that resolved?.

Are you seeing any photos at all?  The post has drifted off a little so there has been no new photos with the last couple of posts, but I will remedy that a little later today.
This is acually off topic here, and i bette would talk about the things you explain.

The problem with the pictures seams to be solved, id did not change anything and the pictures do show up now.

To the questions:
 is there much "bounce" in them or is that resolved?
No there is not a lot of bounce, sure it is always a compromise. In may case i could  even reduced the bounce if i would not use wood for some parts of the levers. Dimension on the wooden parts is very low in this case.
The treble keyboard is basically conservative and in the traditional way.
The leavers are made up of a wooden and a Aluminum part glued together near where the bearing is placed.
I use plastic bearings within the wooden part. The rods are 1,5mm in diameter. Springs differ on all for rows. Springs are turned by hand with a self made tool. Also important is that the flaps are very light weight.  Fitting the bearings and putting all in a right angle is difficult. All must move easily without having to much play on the other hand. I did make different treble keyboards in the past as well, and all do have pro and contras.
I did have a little "bounce" on my 3 rowers, I was using 2 mm rods (bike spokes at the time) and I tried a couple of things to stop it, although I did have one customer say if i could get the same bounce over 3 rows it would have a terrific vibrato effect.
I resolved the problem by reducing the weight on the pallets by using balsa wood that is half the weight of other timbers, and then the real saving was foam as it is only one 3rd the weight of the balsa,  it makes fantastic pallets, this then has other benefits, like using thinner felts and leathers, and it also makes the box faster, as there is less dragging effect caused by the mass weight of the pallets themselves.

I likewise has tried various ways of making treble mechanisms, the main reason I have stayed with the method that I now use is that the mechanism is not so high, and I still get the lift on the pallets I need, and i only have 2.5 mm travel in the button, and another thing is I can still get my 3 row instruments into the 2 row backpacks.   
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: See "Posh Box" being built for "nudiefish"
« Reply #26 on: June 23, 2013, 11:53:53 AM »

Fitting pallets to bass mechanism, in photos you will notice that I have used leather boot lacing. The lacing is placed into the slot and the leaver pushed down into it, as the leather is 1mm thick it allows the pallet to self align with the bulkhead as the leaver is not interfering anywhere else along the slot. if I’m using round rod for the mechanism then I use rubber spline that I have had made for the job. Here you will notice that I have used bolts on the leavers, so here I have used the same leather and of course a dob of glue will be placed over the top later on.
« Last Edit: June 23, 2013, 11:56:23 AM by Peter Stormy Hyde »
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: See "Posh Box" being built for "nudiefish"
« Reply #27 on: June 23, 2013, 12:12:22 PM »

Thanks Stormy - I like the leather idea as it looks like it makes for easier repairs later on - if the lever rusts it won`t split or ruin the wood as there`s plenty of width .
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: See "Posh Box" being built for "nudiefish"
« Reply #28 on: June 23, 2013, 12:40:37 PM »

Thanks Stormy - I like the leather idea as it looks like it makes for easier repairs later on - if the lever rusts it won`t split or ruin the wood as there`s plenty of width .
Thanks Adam-T
I'm glad you like it, the leather lacing is very handy in the workshop as it comes in a couple of thicknesses and widths, and is always very uniform. The lacing gives a pivot point that works the same way as the rubber grommet type pallets. These leavers will not rust as they are brass, but you do have a good point, and the pallets are balsa, on the treble side I will be using foam pallets.
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

JohannPascher

  • Good talker
  • **
  • Offline Offline
  • Posts: 55
Re: See "Posh Box" being built for "nudiefish"
« Reply #29 on: June 23, 2013, 08:02:56 PM »

Fitting pallets to bass mechanism, in photos you will notice that I have used leather boot lacing. The lacing is placed into the slot and the leaver pushed down into it, as the leather is 1mm thick it allows the pallet to self align with the bulkhead as the leaver is not interfering anywhere else along the slot. if I'm using round rod for the mechanism then I use rubber spline that I have had made for the job. Here you will notice that I have used bolts on the leavers, so here I have used the same leather and of course a dob of glue will be placed over the top later on.

Hi Peter, i also like your solutions. I agree that the main thing is to reduce the weight of the pallet, so the assembly lever plus pallet does not get into a critical resonance less weight is preferable in every way. I also did use balsa pallets on one box.
On a other box i used 0,4mm glass fiber with a lether and a top u profile that gets in the same direction as your leather solution, so the pallet is also to some extent selves adjusting. I tried a few other more complex leaver pallet Assembly's.

I never could get hold of foam that is of the quality as you use it. So my be at one stage i my be using foam in the future as you. Did you ever put a complete treble pallet used on a two reed-ed box on a scale?

I also like your bass mechanic, do yo get this Assembly's from Italy?

Best regards, Johann
 
 
Logged

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: See "Posh Box" being built for "nudiefish"
« Reply #30 on: June 24, 2013, 10:27:28 AM »

Fitting pallets to bass mechanism, in photos you will notice that I have used leather boot lacing. The lacing is placed into the slot and the leaver pushed down into it, as the leather is 1mm thick it allows the pallet to self align with the bulkhead as the leaver is not interfering anywhere else along the slot. if I'm using round rod for the mechanism then I use rubber spline that I have had made for the job. Here you will notice that I have used bolts on the leavers, so here I have used the same leather and of course a dob of glue will be placed over the top later on.

Hi Peter, i also like your solutions. I agree that the main thing is to reduce the weight of the pallet, so the assembly lever plus pallet does not get into a critical resonance less weight is preferable in every way. I also did use balsa pallets on one box.
On a other box i used 0,4mm glass fiber with a lether and a top u profile that gets in the same direction as your leather solution, so the pallet is also to some extent selves adjusting. I tried a few other more complex leaver pallet Assembly's.

I never could get hold of foam that is of the quality as you use it. So my be at one stage i my be using foam in the future as you. Did you ever put a complete treble pallet used on a two reed-ed box on a scale?

I also like your bass mechanic, do yo get this Assembly's from Italy?

Best regards, Johann
 
G'day Johann
The foam is used in the boat building industry and is what is used to laminate fiberglass and foam to give it strength and lightness.
I have weighed the pallets in the past, but my scales are not as good as they used to be so I cannot give you a truthful answer on that one.

What you are looking at is the very last 12 bass mechanism (I still have 8 bass ones) that I got from East Germany just as the wall fell, I think i got all that was in the warehouse at the time, and they are spring retention leavers and they are brilliant, very good German engineering, they have never given me a single moment of grief. I much prefer them to the Italian method as they came with springs as well, and they cost me at the time $0.50 cents each unit. I did take one unit to Carini in Italy to see if they could get them made, although Roberto was very impressed with them he was not keen to do anything about getting them made. Of course if one needed plenty of them and as they could be done in a sheet metal workshop I'm sure the Chinese would be able to make them cheaply and still keep the quality.

Interestingly; I used to get all my parts from East Germany  in the early days, and the reeds prey wall or should I rightly say "unification" were very good but after they were not so good and the quality dropped off. I still have early accordions out there that I made 27 years ago with E/G reeds and bellows still going strong, and i have never had a reed breakage from them. I had one customer whose instrument got a little damaged so I used as much of the original timber and turned it from a full sized box into a flutina and used a single voice E/G set from the original 2 voice and it sounded fantastic.

« Last Edit: June 26, 2013, 12:08:24 PM by Peter Stormy Hyde »
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: See "Posh Box" being built for "nudiefish"
« Reply #31 on: July 01, 2013, 12:38:45 PM »

On the bass side I have used balsa pallets this is because I had the stock ready, and on the treble side I made them from foam.
There are many ways of making pallets but I chose to have a very special router cutter made that is fully adjustable so any pallet from the smallest to the biggest can be made on that same cutter, it allows me to shape the edges be that ¼ round or straight 45 degree angle and the slots any way I need.

 These pallets are made in just one pass then I run the stock through the band-saw to cut off the pallet strip. The strip is then cut into the desired pallet length then the pallets are placed into an angle jig and passed under the thickness sander to profile the front and back edges.
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: See "Posh Box" being built for "nudiefish"
« Reply #32 on: July 01, 2013, 12:43:07 PM »

Here are the foam pallets
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: See "Posh Box" being built for "nudiefish"
« Reply #33 on: July 01, 2013, 01:03:26 PM »

Thanks again - How do you find the foam withstands facing replacement ? , I`d think the Balsa ones would have to be replaced if they need facing but is foam more resilient ? .... also what is the benefit of using balsa and foam pallets , I`d have thought this is one area where the traditional servicable rigid wood which is still very light (or solid resin / Fibreglass as in the better steirisches & Classical CBAs, heavier though) would have been better .

Logged
Q: How do you cure MAD?
A: Buy more Boxes

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: See "Posh Box" being built for "nudiefish"
« Reply #34 on: July 02, 2013, 11:51:33 PM »

Thanks again - How do you find the foam withstands facing replacement ? , I`d think the Balsa ones would have to be replaced if they need facing but is foam more resilient ? .... also what is the benefit of using balsa and foam pallets , I`d have thought this is one area where the traditional servicable rigid wood which is still very light (or solid resin / Fibreglass as in the better steirisches & Classical CBAs, heavier though) would have been better .
Both the balsa and foam handle re facing very well, I use PVA glue that is water soluble, i can just place the pallets down on a wet cloth and after about 10 minutes the whole lot just falls off. But even so balsa and foam are stronger most would think, so you can just pull the felts off.

The big benefit by using balsa and foam is the speed of the instrument is improved because of the reduced weight. The other point is that I'm not limited to off the shelf sizes and designs.
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: See "Posh Box" being built for "nudiefish"
« Reply #35 on: July 07, 2013, 05:02:19 PM »

I`ve not seen Water soluable PVA (not one for glueing the casings together on boxes likely to be used for the Morris in the UK - LOL) sounds like a good move for pallet facings though ..
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: See "Posh Box" being built for "nudiefish"
« Reply #36 on: July 09, 2013, 03:06:07 PM »

I`ve not seen Water soluable PVA (not one for glueing the casings together on boxes likely to be used for the Morris in the UK - LOL) sounds like a good move for pallet facings though ..

One could always use Rabbit Skin glue that you can get from Art Suppliers, as it is still used to size canvases.
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: See "Posh Box" being built for "nudiefish"
« Reply #37 on: July 09, 2013, 03:09:32 PM »

The cutting out of the reed block seals can be a tedious job at times, there are different ways of doing this job but over the years of trying most I have found this way the best.
I staple a sheet of the double felted leather (skiver) down on a kitchen chopping board; I then staple the template over the top and then use double beveled chisels to cut them out. I know everybody’s first thoughts would be to use a very sharp art knife or scalpel, but no mater how sharp they are they will draw the leather.
Some of the other ways is to use jute or hemp string or even bellows seal sponge.
Here is some discussion I have had before about this subject.

http://forum.melodeon.net/index.php/topic,7527.msg93681.html#msg93681
« Last Edit: July 09, 2013, 03:11:34 PM by Peter Stormy Hyde »
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: See "Posh Box" being built for "nudiefish"
« Reply #38 on: July 09, 2013, 05:03:32 PM »

The cutting out of the reed block seals can be a tedious job at times, there are different ways of doing this job but over the years of trying most I have found this way the best.


I`ve only done it once , to a Hohner using Charlie Marshall's self adhesive reedblock gasket material - I stuck it to the fondo and carefully cut out the circles using a scalpel (with the action removed of course ;-) , fiddly but did the job nicely . I guess a Template helps , with circular holes like in Hohner a sharpened pipe of the right diameter and a hammer would make the perfect punch (thanks for the tip Graham) after laying the material on wood ..  I hadn`t a hohner template so used the scalpel after sticking the stuff down way
« Last Edit: July 09, 2013, 05:05:15 PM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

nudiefish

  • Member
  • *
  • Offline Offline
  • Posts: 40
  • Aussie Morriser
    • Art Prints
Re: See "Posh Box" being built for "nudiefish"
« Reply #39 on: July 12, 2013, 04:27:21 AM »

Last night Stormy sent me a little email update on how the box was going.  Essentially, its getting very close to finishing. 

In the telling, though, he revealed just how clueless I really am in the craft of making melodeons.  He said that he just finished the "air leak" test where he fills the box with water to see where the water seeps out.  I totally believed him and wondered just how he protected the working mechanisms.

I re-read that paragraph several times trying to work out how he did the trick.

It is sad to say, that it took me about 30 seconds to realise that he was pulling my leg.  Actually, I never did work it out, in the next paragraph he told me he was kidding. 

Filling the box up with water.....  Jeeze....
Logged
1 x Hohner D/G, 1 Sandpiper Stint D/G and a Hyde D/G Box.  I'm also a photo buff!
Pages: 1 [2] 3 4 5 6   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal