Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Small brass hook- what's it for?  (Read 6195 times)

0 Members and 1 Guest are viewing this topic.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Small brass hook- what's it for?
« Reply #20 on: January 11, 2014, 11:57:24 PM »

Firstly you must remove the keyboard from the box, that will release all of the spring tension. Get a long elastic band and place it around the keyboard, end to end, thus holding the levers in place. Then grip the hook on the axle with a mole grips and gently rotate back and forth whilst withdrawing the axle from the keyboard. Don't force it.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Small brass hook- what's it for?
« Reply #21 on: January 12, 2014, 11:43:33 AM »

I'd be surprised if you find the cause to be a faulty spring. Unlike Hohner springs, Italian springs almost never break. Before removing all the levers double-check if there isn't another cause. If it is necessary to follow Rees' advice, check again as soon as the rod has moved.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Small brass hook- what's it for?
« Reply #22 on: January 12, 2014, 11:53:10 AM »

Yes, agree with diatonic.  If the spring was broken the button would be floppy, and would drop down if lifted up.

The cause of a button sticking is more likel to be some foreign material down the side of the lever, or tightness where the axle goes through the lever.
Be extremely careful if you try to clear the hole, it us all too easy to end up with an overlarge hole which will allow the button and lever to move sideways, giving it a sloppy feel when playing.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Small brass hook- what's it for?
« Reply #23 on: January 16, 2014, 05:12:09 PM »

One could look at the wire loop as a sort of "grenade pin" don't remove until you really need to.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal