Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Replacing Bellows clips  (Read 1356 times)

0 Members and 1 Guest are viewing this topic.

El-ahrairah

  • Member
  • *
  • Offline Offline
  • Posts: 14
Replacing Bellows clips
« on: May 20, 2013, 07:39:28 PM »

I have an old Pokerwork that I am refurbishing and I have a question about the bellows clips. The bellows tape needs to be replaced and that should not be in issue. The Bellows themselves are in quite good shape and with some new fabric applied will they will look great. The corner clips are another matter. They are all quite corroded and look nasty. I read someplace that you should never remove bellows clips. Is this correct? Is there any special advice I need before I do try an replace them all?

 :o
Logged
All the world will be your enemy, Prince with a Thousand Enemies, and when they catch you, they will kill you... but first they must catch you.

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Replacing Bellows clips
« Reply #1 on: May 20, 2013, 07:50:05 PM »

I seem to remember Theo saying he would do anything to avoid changing the bellows corners. I've no idea what's involved as I took his advice. Perhaps you should consider replacing the bellows if the rest of the instrument is worth it.

Pete.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Replacing Bellows clips
« Reply #2 on: May 20, 2013, 08:22:40 PM »

Replacing corners is a painstaking but not particularly difficult job so long as the replacements are identical to the originals.
Great care must obviously be taken when removing the old ones to avoid damage to the bellow papers, especially if the rust is severe.
Probably the hardest part of the job is ensuring that the new ones are knocked into alignment first and then not damaged when pinching them shut.
You can cheat a bit by lightly gluing them first and it can be a great help if you have access to a press large enough to accommodate the complete bellows.
Even then they still need pinching into the card so that you are not relying on the tape to keep them in place.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal