Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Learning to tune/fix boxes  (Read 2169 times)

0 Members and 1 Guest are viewing this topic.

LDbosca

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 674
Learning to tune/fix boxes
« on: June 02, 2013, 08:20:11 PM »

Hi all,

I've been thinking over the past while about learning to tune/mend accordions; playing music full time has its ups and downs and it seems like it might be a good avenue to explore career wise and allow me to still remain self employed. The thing is, I don't have a background in woodwork or anything like that and I'm not artistic with physically making things, so I wonder will I have an apptitude for it. I was quite good at science subjects in school so maybe that type of intelligence would help.

I've been looking at cheap piano accordions on ebay, that'd give me a bellows for a tuning table and lots of reeds to scratch away at, but can anyone give me a list of basic tools to start out with? I've looked on Charlie Marshall's site and there's a plethora of files and scratchers but, lacking experience and knowledge, I don't really know which to pick up. I also figure a spoon for wax and a few other bits will be essential.

Also, any tips/advice/starting points are more than welcome.

Thanks a lot,
Luke.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Learning to tune/fix boxes
« Reply #1 on: June 02, 2013, 08:29:52 PM »

The most important things are that you have space where things can be laid out and don't have to be put away till the job is done, and undisturbed time that you can concentrate on the task in hand. 

Don't start trying to equip yourself to do everything form the start.  Start with a few simple things that don't need specialised tools, eg bellows gaskets, pallet facing, bellows taping.  If you get on ok with that then move on to mechanism repairs, and reed work.   When you get to the stage when you are confident doing work on your own instruments that you gig with then think about doing a few freebies for friends.  Ask for honest feedback.  Be prepared to keep learning.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Learning to tune/fix boxes
« Reply #2 on: June 02, 2013, 10:22:59 PM »

There was a thread here on a book, Accordion Repairs Made Easy by John Reuther, that might be of use.  I found a free download somewhere but it doesn't seem available anymore.  In an interview he said he just dived in, wholly self taught, he simply tried any kind of approach to see what would work and the book is the result.  I need to fish out my copy as I've a few boxes with loose reeds and would like to be able to get under the hood and tweak things when I want to.
Logged

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Learning to tune/fix boxes
« Reply #3 on: June 03, 2013, 02:18:11 AM »

Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

LDbosca

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 674
Re: Learning to tune/fix boxes
« Reply #4 on: June 03, 2013, 02:47:13 PM »

Thank you all very much, I'll update you with any progress I make! I'm going to pick up one of those books as a start and take it from there.

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Learning to tune/fix boxes
« Reply #5 on: June 04, 2013, 09:37:02 AM »

If you are seriously planning to embark on and succeed in a career as an accordion technician you need to do much more than read some books and watch some videos. My advice would be to enroll in an acc. techn. school or, if that is not possible, look for an apprenticeship under the guidance of an experienced box maker (-tuner, repair person). 
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Learning to tune/fix boxes
« Reply #6 on: June 04, 2013, 10:26:04 AM »

In an ideal world, that would be an excellent thing to do; unfortunately, the reality is that opportunities such as these are very few and far between, especially in the current economic climate. In my own case, I always used to take my repairs & tuning to a reputable and experienced technician; having moved 2000 miles from home to a small island with very few accordions in evidence an do history of accordion making or maintenance, learning to do my own repairs & tuning has been a matter of necessity.  I started by reading everything I could lay my hands on and asking advice in quarters such as this forum, then acquiring some extremely cheap scrap boxes to make my initial mistakes on. It took a couple of years before I plucked up the courage to take a scraper to the nice Italian reeds in my Saltarelle, but now I'm quite confident in keeping all my boxes in reasonable nick myself. 

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Learning to tune/fix boxes
« Reply #7 on: June 04, 2013, 12:01:58 PM »

I have absolutely no problem with people fettling their own boxes. What I meant is that it is a very different thing to turn it into a business.
Logged

LDbosca

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 674
Re: Learning to tune/fix boxes
« Reply #8 on: June 04, 2013, 12:27:48 PM »

I have absolutely no problem with people fettling their own boxes. What I meant is that it is a very different thing to turn it into a business.

Very true. That said, I'm fairly sure that some of the big guys doing in Ireland haven't had any of the training you describe. It's an idea I'm just kicking around at the moment, there'd be years of learning and practice before it would become anything of a business, if it ever did.
I hold myself to pretty exacting standards in my playing and would do the same if I were to work on any one else's instrument.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Learning to tune/fix boxes
« Reply #9 on: June 04, 2013, 01:40:33 PM »

Actually, I know a couple of people in UK who are self-taught and have turned it into a business. Whether it was a successful move and whether their work is any good I wouldn't know - you'd have to ask their customers.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal