Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Celluloid repair help  (Read 3270 times)

0 Members and 1 Guest are viewing this topic.

windybutton

  • Member
  • *
  • Offline Offline
  • Posts: 32
Celluloid repair help
« on: June 07, 2013, 09:49:06 AM »

Hi All
I've searched the forum but I'm still unsure how to stick back
The celluloid that's been lifting on the edges of the treble side.it almost looks like
It's shrunk
Should I suspend part in a closed bucket above water acetate mix or paint
The solution on the area to try and stretch back to place?
Any help much appreciated
Best regards
Roy
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Celluloid repair help
« Reply #1 on: June 08, 2013, 09:38:08 AM »

Please post a photo so we can see the problem.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

windybutton

  • Member
  • *
  • Offline Offline
  • Posts: 32
Re: Celluloid repair help
« Reply #2 on: June 08, 2013, 02:43:25 PM »

Here it is
Logged

windybutton

  • Member
  • *
  • Offline Offline
  • Posts: 32
Re: Celluloid repair help
« Reply #3 on: June 08, 2013, 02:53:39 PM »

Here is another angle
This is a restore project from ebay so I'm not sure
How it became like this
The name of the box is Firotti
Thanks
Roy
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Celluloid repair help
« Reply #4 on: June 08, 2013, 03:29:59 PM »

I don't think you can do much more than to stick down the lifted edges.  The usual method of softening the celluloid is to soak it in a 1:1  mix of acetone and water till it gets to the condition of soft rubber, then stretch it to fit the surface. The only way I could imagine doing that would be to remove the entire sheet, stretch and re-apply, but you really need to have a much bigger sheet so you have something to get hold of to do the stretching. I suppose the ultimate method would be to strip off all the celluloid and re-cover with new.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Celluloid repair help
« Reply #5 on: July 02, 2013, 10:00:02 PM »

 I have had good luck heating the celluloid with a heat gun on low. It gets flexible quite suddenly at a bit above 250 or so. Have a smooth block of wood handy to press down the celluloid you have softened.
 You need to work fast once the celluloid is hot and soft as it cools quickly. Work small areas at a time. You can go back and do it again if you don't get it right.

 Use contact cement to stick it down after ,working it under with a blade. Any glue with acetone in it will cause it to get weird and wrinkle.

 Use matching nail polish to fill in edges or gaps, do only one application a day ,or you will find bubbles when you sand or file it out.

The heat gun method is what I use to flatten warped celluloid grills of old instruments. WARNING if while heating you get a strong smell of camphor it is TOO HOT, it will soon catch on fire! have a spray bottle and a wet rag at hand as a safety precaution.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

windybutton

  • Member
  • *
  • Offline Offline
  • Posts: 32
Re: Celluloid repair help
« Reply #6 on: July 07, 2013, 03:15:16 AM »

Thanks for all advice
mel net is such a great resource

Cheers
Roy
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal