Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: What's it called? (And how do you do it?)  (Read 6822 times)

0 Members and 1 Guest are viewing this topic.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: What's it called? (And how do you do it?)
« Reply #20 on: June 09, 2013, 02:16:40 AM »

I took my box apart last night and there's very thin, hard leather on the, um, pallets. I have some felts left over from doing work on my piano that might be appropriate...
Kate - as a pallet-facing material, felt on its own is not recommended as it will not give you a sufficiently air-tight seal. There is proper stuff available for this job which consists of a felt backing faced with fine Persian leather. You can get this from an excellent supplier, Charlie Marshall, CGM Musical Services, who is based in Scotland but will ship world-wide. He is very reliable and many of us here on this forum use his services for spares and replacement parts.

This is the stuff you need. It will improve the noisy action of a Pokerwork/Erica no end.

There are various threads on this forum which describe the methodology for re-facing the pallets and it is worth searching for them, as there are hints and tips which are very useful. Try a search using the words 'pallet facing'

Here's one post in a useful thread which includes a link to Lester's useful photos.  (:)
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

katesfolly

  • Member
  • *
  • Offline Offline
  • Posts: 14
Re: What's it called? (And how do you do it?)
« Reply #21 on: June 09, 2013, 04:03:16 PM »

Many thanks for the shove in the right direction, Steve!

@Graham and others: Thanks for the clarification.  Variations in English are fascinating, huh?
Logged

sqwzboxstudent

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
  • dartmoor / gypsy style
Re: What's it called? (And how do you do it?)
« Reply #22 on: June 10, 2013, 04:31:37 PM »

So how fast does a triplet have to be to be a triplet, and not 3 of the same notes? :|bl
Logged

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Re: What's it called? (And how do you do it?)
« Reply #23 on: June 10, 2013, 04:45:50 PM »

So how fast does a triplet have to be to be a triplet, and not 3 of the same notes? :|bl

A triplet is equal length quavers (eighth notes) played in the duration of a crochet (quarter note). So three quavers in the time you would normally play 2 quavers.
Logged
Sean McGinnis
Bordentown City, NJ, USA

sqwzboxstudent

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
  • dartmoor / gypsy style
Re: What's it called? (And how do you do it?)
« Reply #24 on: June 10, 2013, 05:58:15 PM »

thanks ! so are these triplets? played on one finger

http://youtu.be/hIp8kGhD8QQ

i mean the ones i play in the A music

thanks !
Logged

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: What's it called? (And how do you do it?)
« Reply #25 on: June 10, 2013, 07:13:50 PM »

Tommy, a triplet usually refers to three notes played in the space of two... what you are doing sounds like a note repeated three times without any special timing. If we wrote your tune out in jig time, or six-eight march time, the notes in the first phrase would go something like:

long-short long-short | short-short-short long-short | etc. (or crotchet-quaver or quarter-eighth or whatever you please) where the bits in red are the repeated notes.

The kind of triplets we are talking about in this topic (at least the ones I'm talking about  (:)) usually occur in reels rather than jigs and involve scrunching three notes into the space of a crotchet or quarter-note. In the above example you'd have to squeeze another note in like this:

long-short long-short | extrashort-extrashort-short-short long-short |   which might not sound that clever...

Hope this helps!

Edit PS for the musicologically picky I realize that extrashort-extrashort-short doesn't describe a true three-into-two triplet in the classical sense, where the three components are equal in length at one-third of the long note they are replacing, but what people in Irish and Scottish trad actually play most of the time is semiq-semiq-q or 16th-16th-8th and not 3.333-3.333-3.333 !
« Last Edit: June 10, 2013, 07:19:55 PM by Steve Jones »
Logged

sqwzboxstudent

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
  • dartmoor / gypsy style
Re: What's it called? (And how do you do it?)
« Reply #26 on: June 10, 2013, 07:22:00 PM »

Ideal  :D
Logged

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: What's it called? (And how do you do it?)
« Reply #27 on: June 10, 2013, 07:53:58 PM »

What fingering I use when doing a single note triplet depends upon which finger the note is sitting at the time.

I tend to favour two finger triplets:

4-3-4, 3-2-3, 2-1-2 ... unfortunately you run out of fingers and try as I might I never been able to persuade the 1-2-1 combination to work reliably so on the occasions that there's a triplet that has to be done on the first finger it has to be a 3-2-1.

Doing two finger triplets leaves your hand and fingers back where they were, as does a 3-2-1 triplet for the index finger position. I think this is important for putting this ornamentation into a tune, it should not impede the general flow of the playing, they just "pop out" so to speak.

Right, I'm off to our session (:)

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: What's it called? (And how do you do it?)
« Reply #28 on: June 10, 2013, 08:34:04 PM »

I use 3 fingers for a three (same note) triplet  fingers 123  at right angles to keyboard  and held tightly together. the fingers then resemble a segment of a cogwheel and by passing the 'segment' rapidly across the appropriate button you get a very fast triplet.  takes a bit of practice outside of the tune but can be done on either row.

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

EastAnglianTed

  • The wise wearer of the onesie
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 531
  • Castagnari Hascy-East Anglia for the win!
    • My Youtube account
Re: What's it called? (And how do you do it?)
« Reply #29 on: June 16, 2013, 10:58:12 PM »

I generally use 3 (ring/middle/index) fingers flicking the top of the button in a fast roll. The main alternative is middle/index/middle which somehow seems stronger. Can't say could ever hit either 100% of the time  :-\  Clever buggers eg Pignol (seen) and Cutting (claimed) can do it all with a single finger. I've also seen John Kirkpatrick roll a note continuously ..  ..  AFAIR using 3 finger method. Believe he had forgotten the words to his song, and was awaiting inspiration ;)

If you are tripletting (another new word for Lester ;D ) eg D or E on a D/G you can spread it over 2 buttons using the 2 rows, rather easier but somehow lacks oomph.
    I can say that Mr. Cutting can indeed 'trill' with 1 finger- I saw it with my own eyes!  >:E >:E >:E
Logged

ButtonBox21

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 106
Re: What's it called? (And how do you do it?)
« Reply #30 on: July 02, 2013, 12:30:23 PM »

I have heard this technique referred to as the "rapid fire technique". You can hear Jackie Daly play this on "Mulqueens Reel" (http://www.youtube.com/watch?v=D6sPWV5_o1U), and Finbar Dwyer plays this extensively on the "Waltz of the Birds". This technique is used in all types of diatonic accordion music. I use it a lot in Italian music.  Mostly you will use your index and middle finger, but in some tunes you can use all four by dragging them across the button. This takes a lot of practice but the result is worth the effort. I generally use the index and middle finger and this works fine for me. Start slowly on different buttons and as you become more accurate, speed will come. Hope this helps. Good luck :||:
Logged
Keep on Squeezin'
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal