Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Bellows Pin Remover  (Read 7579 times)

0 Members and 1 Guest are viewing this topic.

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Bellows Pin Remover
« on: June 08, 2013, 02:48:29 PM »

Does anyone here sell a bellows pin remover tool? I'm not sure what the official name for it is but if anyone has one they want to sell please PM me.

Cheers,
Sean
Logged
Sean McGinnis
Bordentown City, NJ, USA

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bellows Pin Remover
« Reply #1 on: June 08, 2013, 03:34:07 PM »

A pair of end cutters does a good job.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Bellows Pin Remover
« Reply #2 on: June 08, 2013, 04:13:07 PM »

Absolutely agree with Theo - and as you don't want them for their cutting ability go for the cheapest you can get ... I use these: http://www.amazon.co.uk/dp/B001C7HJ4U/?tag=hydra0b-21&hvadid=9550950909&ref=asc_df_B001C7HJ4U

I've modified them by filing a hole about the dimensions of a standard Italian bellows pin shaft in the middle using a cheap needle file.  Other improvements can be made by blunting the cutting edge using a straight file before filing the hole - and glueing a soft thin material (leather) to the part of the tool that is going to come in contact with the instruments it is repairing which reduces the risk of scratching.

Cheers

Squeezy
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Re: Bellows Pin Remover
« Reply #3 on: June 08, 2013, 04:19:56 PM »

Shipping on that one to the States is quite expensive but I'm sure I can find an equivalent on the .com version of the website.

Thanks!
Logged
Sean McGinnis
Bordentown City, NJ, USA

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Bellows Pin Remover
« Reply #4 on: June 08, 2013, 04:36:04 PM »

You can buy one at Harbor Freight for $2.50: http://www.harborfreight.com/4-inch-end-nipper-pliers-39531.html
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Bellows Pin Remover
« Reply #5 on: June 08, 2013, 04:38:05 PM »

Shipping on that one to the States is quite expensive but I'm sure I can find an equivalent on the .com version of the website.

Thanks!

In my experience boot sales, flea markets & pound shops (I assume there's a US equivalent of these) as well as the cheap supermarket chains like Lidl and Aldi usually have plenty of cheap sets of small pliers including end-cutters which will serve the purpose admirably - and you get some useful small pliers as well.  The ones I use came from Aldi - 6 assorted pliers/cutters for a couple of quid.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Bellows Pin Remover
« Reply #6 on: June 08, 2013, 04:38:27 PM »

Thanks - Just ordered a pair - I`ve been using regular side cuts and a piece of plastic card to protect the finish
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Bellows Pin Remover
« Reply #7 on: June 08, 2013, 05:55:46 PM »

Be careful of side cutters, as they might have a ridge on them which will damage the finish. I bought a pair and pulled out all of the bellows pins on one side of my Saltarelle before I noticed :(
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Bellows Pin Remover
« Reply #8 on: June 08, 2013, 07:22:35 PM »

Yes, an efficient pair of end cutters will neatly snip off your bellows pins leaving you with a major problem - which is why Squeezy suggests filing a notch in them to fit round the average pin.  In the cheapie stuff we're talking about here, though, there's every chance the metal of the pins will be harder than that of the cutters! Having said that, I would have thought it only common sense to examine the tool you've acquired and try to ensure it will do no damage to your pins before using it - and of course, apply only the minimum pressure required to get the pin moving.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Bellows Pin Remover
« Reply #9 on: June 08, 2013, 09:47:44 PM »

Try jewellery pliers, which have plastic faced jaws. There are lots on EBay.

I also use Maun end-cutters. I notch them per Squeezy,  file off the cutting edge, and install a threaded and adjustable stop, which I adjust to the pin shank diameter and which stops the tool from being closed too tight and marking or spoiling the pin.

Personally, I've found that a lot of thought, much trial and error, but very little investment, has resulted in a set of tools that do precisely what I want.
« Last Edit: June 08, 2013, 11:11:02 PM by Prestidigitator »
Logged

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Bellows Pin Remover
« Reply #10 on: June 09, 2013, 01:27:36 AM »

Another good tool for the job is what we in the States call a "trim tool" which is used for prying off the interior door upholstery on most autos.

The one on the top generally works best if you can find a set of "1".

http://www.crutchfield.com/p_126CR3NGL/Bojo-Trim-Panel-Tools.html?tp=990&awkw=19884656305&awat=pla&awnw=g&awcr=15802862185&awdv=c
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Bellows Pin Remover
« Reply #11 on: June 09, 2013, 10:35:08 AM »

Another good tool for the job is what we in the States call a "trim tool" which is used for prying off the interior door upholstery on most autos.

The one on the top generally works best if you can find a set of "1".

http://www.crutchfield.com/p_126CR3NGL/Bojo-Trim-Panel-Tools.html?tp=990&awkw=19884656305&awat=pla&awnw=g&awcr=15802862185&awdv=c

Any tool, such as this, that requires you to pivot on the casework to lift the pin is, in my opinion, a bad thing. Pliers that allow you to draw the pin out with no contact on the casework are far safer.

I also recommend covering the pin with some rag before grasping it with the pliers to protect both the pin and the casework.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Bellows Pin Remover
« Reply #12 on: June 09, 2013, 10:52:42 AM »

Another good tool for the job is what we in the States call a "trim tool" which is used for prying off the interior door upholstery on most autos.

The one on the top generally works best if you can find a set of "1".

http://www.crutchfield.com/p_126CR3NGL/Bojo-Trim-Panel-Tools.html?tp=990&awkw=19884656305&awat=pla&awnw=g&awcr=15802862185&awdv=c

Any tool, such as this, that requires you to pivot on the casework to lift the pin is, in my opinion, a bad thing. Pliers that allow you to draw the pin out with no contact on the casework are far safer.
I agree. A lever-type tool also has the effect of pulling out the pin in a curved path which can risk (a) bending of thin pins and (b) elongating the pin holes to an elliptical shape. A straight pull out, along the axis of the pin is what you should aim for.

Quote
I also recommend covering the pin with some rag before grasping it with the pliers to protect both the pin and the casework.
Yes, I use a scrap piece of thin chamoix leather for this purpose.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Bellows Pin Remover
« Reply #13 on: June 10, 2013, 04:15:50 AM »

Well, yes, I agree with the side cutters, that's what I always used.  Also needle-nose pliers.
And yes, padding out/protecting with chamois or similar.
What is nice about trim tools are that they are often polycarbonate and relatively soft/non-maring, especially with added chamois, etc.
Agree: the straightest pull is the the goal (along with not damaging the casework, scratching the pin, etc.
Might also add to this thread:  always use a pin block, foam block or similar to be sure to put the same pin back in the hole it came out of.
Some boxes (many?) have quite irregular pins/pinholes, and putting the same pin back in the same hole is important.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Bellows Pin Remover
« Reply #14 on: July 02, 2013, 10:03:48 PM »

PM me if you still need one. I make them out of end nippers. The face is ground and polished to prevent scratches on the instrument ,and the jaws are ground and altered to pull pins without cutting or gouging them.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Re: Bellows Pin Remover
« Reply #15 on: July 03, 2013, 03:10:31 AM »

PM me if you still need one. I make them out of end nippers. The face is ground and polished to prevent scratches on the instrument ,and the jaws are ground and altered to pull pins without cutting or gouging them.

I'm in the process of doing this. I filed a hole in the edge and am going to grind and polish it flat. Thanks for the offer though.
Logged
Sean McGinnis
Bordentown City, NJ, USA

ButtonBox21

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 106
Re: Bellows Pin Remover
« Reply #16 on: July 04, 2013, 12:12:52 PM »

Just a thought, have you talked to a technician at an accordion dealer/repair shop as to what they use to remove pins. I have seen a tool that looks like a screwdriver with a small claw on the end. I don't know what it is called but it worked very well and didn't leave scratches. I am sure a dealer/repairer would be happy to assist you.  :||:
Logged
Keep on Squeezin'

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bellows Pin Remover
« Reply #17 on: July 04, 2013, 12:26:15 PM »

Just a thought, have you talked to a technician at an accordion dealer/repair shop as to what they use to remove pins.

Several have already responded.

Hohner sell Bellow pin pliers part number TA18010 price €141.60.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: Bellows Pin Remover
« Reply #18 on: July 04, 2013, 12:33:28 PM »

I have seen a tool that looks like a screwdriver with a small claw on the end. I don't know what it is called but it worked very well and didn't leave scratches.
That is a tack lifter. The one sold by B&Q comes on a card which is handy for putting under the tool to protect the accordion surface.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Bellows Pin Remover
« Reply #19 on: July 04, 2013, 12:39:28 PM »

I have seen a tool that looks like a screwdriver with a small claw on the end. I don't know what it is called but it worked very well and didn't leave scratches.
That is a tack lifter. The one sold by B&Q comes on a card which is handy for putting under the tool to protect the accordion surface.

No! you will damage the casework eventually and probably sooner than that.
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal