Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Calling B/C players...  (Read 11329 times)

0 Members and 1 Guest are viewing this topic.

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Re: Calling B/C players...
« Reply #20 on: June 10, 2013, 06:13:58 PM »

I'm no expert, but I would like a high D, biggish buttons, thumb groove on the side of a fairly deep keyboard, which is ventilated or pierced - front & back. Made out of Wenge or similar.
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

boxer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 380
  • B/C Pokerwork - ultimate ceili box
Re: Calling B/C players...
« Reply #21 on: June 10, 2013, 07:13:47 PM »

Saltarelle used to do a 4-voice 25 button 2 row with 13 buttons inside, 12 outside.  This (in B/C) gave a low draw D on the inside row I guess.  I don't think they make them at present so perhaps they didn't sell well.

The lower limit of spring weight is determined by the player's style - the higher he or she pumps up the pressure for press notes, the sooner one or all of the pallets will lift of their own volition.  Makers usually don't bother setting spring weight and leave keyboards heavy as lead - probably to avoid complaints from heavy handed players.

The lower limit of key travel is governed by how high the pallet needs to lift in order to allow the reed to breathe fully and sound clearly.  This I suspect may differ from box to box.  Most boxes are sold with far more key travel than absolutely required.

Logged
Nuage, Tommy, Cairdin, 
Double Ray DLX 21x12, Black Dot,
Pre-Erica, Pokerwork
plus various stringed things

blackdot1234

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 152
Re: Calling B/C players...
« Reply #22 on: June 10, 2013, 08:54:17 PM »

button travel is a balance between minimum pallet lift if pallet does not lift enough sound is compramised I have enlarged holes in sound boards on Erica and black dot to allow for this 
Logged

LDbosca

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 674
Re: Calling B/C players...
« Reply #23 on: June 10, 2013, 09:03:27 PM »

You can't have an inside row that's longer than an outside row for Irish music; a lot of players use 5-note rolls which make it necessary to have a lower note than the melody note on the outside row.

Sorry Luke but that doesn't stand up to scrutiny. On a 21-button C#/D, the only note you wouldn't be able to roll in that way would be the low G.

Not a problem for me and really, how many players would rather have no low G at all rather than one you couldn't do one of those yokes on? Can you even think of a tune that has a low G on which a 5-note roll would be crucial? Fiddlers can't do a proper roll on that note and all the trad. tunes that use that note are fiddle tunes.

I was mainly thinking of the low G. I like being able to roll it and it's nice to have the option. I can think of a jig that starts with a low G roll, maybe the fiddlers I've heard play it cran it using two different grace notes, they're certainly doing something and it's not a bowed triplet. Don't for get that most players like "those yokes."

Also, there are more important things in the world than a light box. People often think a box is lighter than it is if it is responsive.

The Briggs gets lots of attention from amateurs as a really light, repsonsive box but only a few pros play them.

IMHO they lack character and, to some degree, dynamic range. I reckon that the extra speed and response they have over some boxes becomes less of an issue when a player reaches a certain point and that the shortcomings of the briggs become more of a problem. I don't think I've ever heard anyone rave about the Briggs' sound either. It seems to suit a few players; such as Dermot Byrne with his even, precise style.

Colm Gannon sold his. There's other players who have them and don't use them as their main box.

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Calling B/C players...
« Reply #24 on: June 10, 2013, 09:25:24 PM »

You can't have an inside row that's longer than an outside row for Irish music; a lot of players use 5-note rolls which make it necessary to have a lower note than the melody note on the outside row.

Sorry Luke but that doesn't stand up to scrutiny. On a 21-button C#/D, the only note you wouldn't be able to roll in that way would be the low G.

Not a problem for me and really, how many players would rather have no low G at all rather than one you couldn't do one of those yokes on? Can you even think of a tune that has a low G on which a 5-note roll would be crucial? Fiddlers can't do a proper roll on that note and all the trad. tunes that use that note are fiddle tunes.

I was mainly thinking of the low G. I like being able to roll it and it's nice to have the option. I can think of a jig that starts with a low G roll, maybe the fiddlers I've heard play it cran it using two different grace notes, they're certainly doing something and it's not a bowed triplet. Don't for get that most players like "those yokes."

Fair enough. I wasn't going to raise the issue of the 11/10 C#/D configuration in this thread, because it was about B/C, but then Andrew himself did.

I stick to my guns: If Andrew is looking for a way to make a 21-button box attractive to C#/D players, 10/11 is very sensible. Here's the equation:

Subtract useless top button on outer row -
Add useful button on bottom of inner row  +
                     Result: a better C#/D box =

This is better than the usual option of sticking low D/G on the bottom of the outer row, because that sacrifices the low Bb, which is useful occasionally.

If C#/D players are really pining not only for a low G, but the ability to do 5-note rolls on one, then they'll have to get a 23-button box. But they'll still have a useless top button on the outer row  ;)

So... if Andrew is still listening... one step better for C#/D would be 22 buttons: add a bottom button on each row and scrap the top outer one.  :|glug But I would be happy with 11/10. And 12 lightweight basses!
« Last Edit: June 10, 2013, 09:28:05 PM by Steve Jones »
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Calling B/C players...
« Reply #25 on: June 10, 2013, 10:12:01 PM »


So... if Andrew is still listening... one step better for C#/D would be 22 buttons: add a bottom button on each row and scrap the top outer one.  :|glug But I would be happy with 11/10. And 12 lightweight basses!

Hi guys,

Thanks for all the interesting discussion here.  Steve, I have a list of box specs in mind for a custom box project someday, and coincidentally a 22 or 24 button keyboard is part of the plan.  Of course, I would never assume that the ideas I propose would find wide popularity, it's just an experiment I would like to see tried. With an internal design modification from the typical construction, to stagger the reedblock-attachment hardware, this could allow a box with reedblocks in extra keys (such as B/C, C/C#, C#/D, D/D#) to do without redundant treble reedblocks for each key (e.g. a total of 5 rather than 8 blocks for a 2-voice, in my example, or 10 rather than 16 blocks for a 4-voice).

PG
Logged

Andrew Roche

  • Guest
Re: Calling B/C players...
« Reply #26 on: June 11, 2013, 01:08:58 AM »

Ok, where to start.

Reed, thanks very much for going to the effort and providing those details of your Cairdin. Most interesting.

The more I think about it, the more I like the idea of going for 23 buttons, without the low bass reeds and thirds there'd only be a very small cost increase, (probably to £1450). and it would leave the door open for a C#/D should there be sufficient demand. Things like the low and high Ds and the 5 note roll issue are exactly what I need to know as someone unfamiliar with the finer points of Irish style. 23 buttons would add noticeably to the cost on the English model and the highest notes on a D/G are not necessary in the English traditional repertoire and never used by the vast majority of players in that idiom. If I may offer my personal opinion as well, they're also thoroughly unpleasant on the ears and only suitable for confusing bats. ;D

This and the similar D/G aren't my main line of interest, they're a sideline to my full service, anything you want bespoke boxes starting at £1900. I can get the price down to £1425 by, (aside from the fairly generous tax situation for a sole trader invoicing below a certain amount per annum in the UK...), making them in batches all to the same spec, using Tipo A Mano rather than A Mano reeds and simplifying some details, (flat grille, no inlay, velcro bass strap, etc), but without compromising quality of construction and playability. I'm aiming these at the kind of people who might be considering something like the Saltarelle Irish Bouebe and may be tempted by the prospect of having a handmade box with better reeds and quality control for only a couple of hundred more. I'm only anticipating one batch of 4-6 depending on demand per year and as a one man operation I can't make much more than 30 instruments at full output each year anyway. Basically, players are getting the option of a handmade instrument for the price of a factory one and I'll be getting business from people who otherwise probably wouldn't be in the market for a £2-3k custom box, which is a fairly good deal for both IMO.

Thanks everyone for your contributions so far.
Logged

sine labore

  • Good talker
  • **
  • Offline Offline
  • Posts: 69
Re: Calling B/C players...
« Reply #27 on: June 11, 2013, 01:18:50 AM »

Anything else anybody would like to suggest?.
[/quote]


Many Irish box players are only interested in the sound that 3 voice tremolo delivers.
I see a lot of the younger players turning to Paolo Soprani and indeed some of the older
players have returned to the Paolo

[/quote]

Yes, the Paolo Soprani in its 3 voice has a special place in my sensory perception, and I hear the sound I like from time to time without being able to pinpoint what it is. Is there any comprehensive sound bank on line for the Paolo that would help, rather than making retailers and tuners the first point of call?

(Sorry to post this after Andrew Roche's latest posting by way of recap.)
« Last Edit: June 11, 2013, 01:25:12 AM by sine labore »
Logged

Pat.

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 176
Re: Calling B/C players...
« Reply #28 on: June 11, 2013, 04:18:02 PM »

[NEW WAVE ] Irish music (:) QUOTE from Aradru.As for bases I like the option  to or take out thirds, the rest is personal to the player but 3 voice is a must as far as I would be concerned.Good luck anyway.
Logged

LDbosca

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 674
Re: Calling B/C players...
« Reply #29 on: June 11, 2013, 05:02:35 PM »

I suppose the small, light-weight market is something in itself; the 3-voice classic tremelo sound has been perfected and never successfully imitated.

Andrew Roche

  • Guest
Re: Calling B/C players...
« Reply #30 on: June 11, 2013, 05:05:12 PM »

Now that I've slept on it and had a look around I've noticed a lack of affordable high quality 3 voice boxes out there. In Saltarelle's range, for example, the price between the Irish Bouebe and Nuage almost exactly doubles, (well, at the Music Room anyway).

Something I was concerned about was offering something that was still not exactly cheap but with features that might be deemed inadequate or typically associated only with beginner or budget models. The thing I was initially concerned about was 21 vs 23 buttons but now I'm wondering if 2 vs 3 voices might be one of those things. I think I'll go for 23 buttons anyway but what I'm now considering is making 2 prototypes, one 2 voice for about £1450 and one fixed 3 voice MMM for about £1650 and see which one is better received...
« Last Edit: June 11, 2013, 05:06:50 PM by Andrew Roche »
Logged

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Re: Calling B/C players...
« Reply #31 on: June 11, 2013, 06:19:50 PM »

I must be in the minority. I had a 3-voice accordion (granted it was LMM not MMM) and didn't care for the sound. I like the semi-dry because it sounds closest (for me) to what the Irish fiddle sounds like.
Logged
Sean McGinnis
Bordentown City, NJ, USA

LDbosca

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 674
Re: Calling B/C players...
« Reply #32 on: June 11, 2013, 06:22:11 PM »

...... the 3-voice classic tremelo sound has been perfected and never successfully imitated.

Aye indeed. That's what I was getting at! I wish someone would replicate the old grey sound.
Surely it's not rocket science?

The current attempt at it is pretty damn poor if you ask me. I heard that Colm Gannon was having the inside of his measured etc by someone, possibly with the intention of replecation, this is second hand and I don't know any more.

The type of steel available at the time and the techniques used to make reeds may not be on hand at the moment. I'm also not sure if there's any record of how things were done.

Also, some of these boxes were from the 40s/50s so there's decades of playing on the reeds, which'll have affected the sound and response. Even on early recordings of grey paolos (McMahon's first album for example) there'd be a lot of playing-in done already.

blackdot1234

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 152
Re: Calling B/C players...
« Reply #33 on: June 11, 2013, 06:32:17 PM »

I have spoken to tuners /repairers on this and poor quality timber was used and ply sound board also tea chest quality reeds standard paolo soprani but played for 60 years also best greys made by pancotti steel on reeds is Swedish all info from nils nielson
Logged

Andrew Roche

  • Guest
Re: Calling B/C players...
« Reply #34 on: June 12, 2013, 12:39:12 PM »

Have you considered a celluloid finish?
Yes it adds cost, but we have a liking for celluloid. Especially grey celluloid.

Afraid not. Applying celluloid and storing and disposing of the materials and chemicals is both a health risk and fire hazard so I won't even consider it.

Tuning can be whatever a customer specifies.
Logged

DaveCottrell

  • Good talker
  • **
  • Offline Offline
  • Posts: 77
Re: Calling B/C players...
« Reply #35 on: June 12, 2013, 02:01:14 PM »

Also take into account the experience of Jim Coogan and John Nolan. Their foray into Irish accordion marketing may be an interesting case study.

The Boxeen is an attempt to replicate the Old Paolo sound (and look) . I have a 4 voice BC 5 coupler and it is better than any Paolo made after 1970. It has more volume than my 1950s LMM Paolo, but is not as sweet.  I don't know how successful or popular they were, but the price was under $2500 for a pretty good box. 

On my BC I would want 3 reeds, a RH bass voice stop or coupler, 23 buttons, ability to switch bass thirds on and off (I do use the thirds occasionally), and a high D on the last B row button press.   I have a Shamrock, the 25-buttoned Saltarelle, and find the hi D draw on the C row easy to play.  That box has 4 reeds and 12 basses it is a monster but I love it. I have it voiced LMMH so it sounds Quebecois.

Also consider having the inner row voice the upper pallets.  Most Irish playing (BC and C#D) is done on the inside row and having it set up thus makes the pertinent reeds seem louder.
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Calling B/C players...
« Reply #36 on: June 12, 2013, 03:14:06 PM »

Also take into account the experience of Jim Coogan and John Nolan. Their foray into Irish accordion marketing may be an interesting case study.

The Boxeen is an attempt to replicate the Old Paolo sound (and look) . I have a 4 voice BC 5 coupler and it is better than any Paolo made after 1970. It has more volume than my 1950s LMM Paolo, but is not as sweet.  I don't know how successful or popular they were, but the price was under $2500 for a pretty good box. 

On my BC I would want 3 reeds, a RH bass voice stop or coupler, 23 buttons, ability to switch bass thirds on and off (I do use the thirds occasionally), and a high D on the last B row button press.   I have a Shamrock, the 25-buttoned Saltarelle, and find the hi D draw on the C row easy to play.  That box has 4 reeds and 12 basses it is a monster but I love it. I have it voiced LMMH so it sounds Quebecois.

Also consider having the inner row voice the upper pallets.  Most Irish playing (BC and C#D) is done on the inside row and having it set up thus makes the pertinent reeds seem louder.

DaveCottrell,

Great comments about the Boxeen.  Interesting to compare that project with the (series of different models of the) recent Paolo Soprani reissue.

I have a Saltarelle Shamrock also and they are great boxes for "all the options" players. They aren't lightweight, but then, heavy boxes such as 9-coupler Paolos have been played at times by pros such as Paddy O'Brien, James Keane, Kevin Keegan, John Whelan, etc. A box like the Shamrock would be much more expensive to produce than the box that Andrew is designing, however they are an example of how much can be crammed into one reasonably compact accordion. My Shamrock is LMMH like yours, but mine is a C#/D.  Relating the Shamrock to your point that the outer button row of many 2-row boxes has a different timbre than the inner row: if you're interested, maybe you & I could get after-market keyboard plates made up for the Shamrock with extra fretwork to open up the sound from the somewhat "buried" pallets of its outer row.

PG
« Last Edit: June 12, 2013, 03:33:25 PM by pgroff »
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Calling B/C players...
« Reply #37 on: June 12, 2013, 03:14:43 PM »

Have you considered a celluloid finish?
Yes it adds cost, but we have a liking for celluloid. Especially grey celluloid.

Afraid not. Applying celluloid and storing and disposing of the materials and chemicals is both a health risk and fire hazard so I won't even consider it.



Hi all,

I agree with aradru that a celluloid finish has a great 20th century vibe for an accordion played for Irish music, and very practical to maintain the finish over hard use.  The celluloid seems to unify the appearance of the wooden casework (especially if the corners are rounded for comfort, the casework joinery tends to show there if not covered or painted, and a patterned celluloid skin can help the roundness look natural). One way to deal with that finish in a small shop would be to contract out the celluloid-skinning step to a factory set up to do it safely.  Maybe no other manufacturers do this anymore in the UK, but I suppose it's still done on the continent, and China of course.

Back to why some people like celluloid, it may be imaginary but I have read speculation about acoustic effects (maybe subtle buzzes, resonances, or frequencies absorbed by the body+celluloid?), based on the fact that accordions from the 1930s with wood bodies and thick celluloid seem to have a particular sound when wet-tuned.  These kinds of effects of materials on musical timbre and response are often denied and hard to study, but I always say "absence of proof is not proof of absence" when it comes to scientific measurement of phenomena that may influence the psychological perception of music.  Appropriate double-blind studies can be difficult to conduct, due to problems in setting up the experimental "controls."  It's hard enough to create two identical boxes except for the celluloid, but almost impossible for the musician not to know that one box, but not the other, is celluloid-finished.

PG
« Last Edit: June 12, 2013, 04:07:10 PM by pgroff »
Logged

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Calling B/C players...
« Reply #38 on: June 12, 2013, 05:09:44 PM »

AFAIK Boxeens were all 21-button models. Not an issue for John Nolan, a B/C player, or Jim Coogan, who played D/C#, of course, but I don't understand why, if they were seeking to produce a replacement for the classic Paolo, they didn't go for 23.

A friend of mine has a Shamrock B/C LMMH. I love the variety of sounds this configuration allows, and I find it a very playable box. (Although the owner said he had to do a lot of tinkering with the treble mechanism to get it into that state of playability. Conveniently he is a mechanical whizz - toolmaker for an aircraft engine manufacturer.)

Andrew, if you make a 3-v prototype, will you allow for a low voice and a stop to cut it out?   

PS regarding the acoustic properties of celluloid - Martin Quinn might have some insights into this, since he routinely strips the celluloid off his hotrodded Hohners. They sound great. The 3v Double-Ray he did up for Sean McComiskey (stripped down to the bare wood) sounds as gorgeous as any old Paolo to my ears.
« Last Edit: June 12, 2013, 05:14:15 PM by Steve Jones »
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Calling B/C players...
« Reply #39 on: June 12, 2013, 05:52:14 PM »

AFAIK Boxeens were all 21-button models. Not an issue for John Nolan, a B/C player, or Jim Coogan, who played D/C#, of course, but I don't understand why, if they were seeking to produce a replacement for the classic Paolo, they didn't go for 23.

A friend of mine has a Shamrock B/C LMMH. I love the variety of sounds this configuration allows, and I find it a very playable box. (Although the owner said he had to do a lot of tinkering with the treble mechanism to get it into that state of playability. Conveniently he is a mechanical whizz - toolmaker for an aircraft engine manufacturer.)

Andrew, if you make a 3-v prototype, will you allow for a low voice and a stop to cut it out?   

PS regarding the acoustic properties of celluloid - Martin Quinn might have some insights into this, since he routinely strips the celluloid off his hotrodded Hohners. They sound great. The 3v Double-Ray he did up for Sean McComiskey (stripped down to the bare wood) sounds as gorgeous as any old Paolo to my ears.

Hi Steve,

Agree with all your points, especially the last.  Martin would have experience that could be very informative on that question, if he would share it.  He's a wonderful tuner (and player) and his website shows pics of many vintage celluloid boxes as well as his stripped and hot-rodded Hohners.  The idea that the celluloid-on-wood boxes from the 1930s have unique tonal properties is quoted from another forum member here.  I'm agnostic on that subject, but very interested.  I like the sound and look of both wood finished and celluloid finished boxes, and actually every individual accordion that's a few decades old or more sounds unique to me.

PG
Logged
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal