Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Leather Reed valves for Tanzbar  (Read 3015 times)

0 Members and 1 Guest are viewing this topic.

El-ahrairah

  • Member
  • *
  • Offline Offline
  • Posts: 14
Leather Reed valves for Tanzbar
« on: June 21, 2013, 04:57:14 PM »

I recently acquired a fun little Tanzbar Mechanical Accordion and I am in the process of bringing it back to life. It is over 100 years old so you can guess it needs some TLC in a few spots. I was wondering where I could get reed leathers in smaller quantity. See that they come in sets at a lot of places, but I only need 16 of them. I had thought about using plastic reeds but I decided to keep the integrity of the instrument and use the original leather. Any suggestion to find them per piece?
Logged
All the world will be your enemy, Prince with a Thousand Enemies, and when they catch you, they will kill you... but first they must catch you.

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Leather Reed valves for Tanzbar
« Reply #1 on: June 21, 2013, 08:06:44 PM »

I'm sure Theo would sell you valves in singles rather than sets. Email him at The Box Place rather than contacting him through the forum.  (:)

Smaller sizes may not be available in leather any more and the modern plastic jobbies do a proper job!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Leather Reed valves for Tanzbar
« Reply #2 on: June 21, 2013, 09:17:48 PM »

I don't know how many valves you have in all in your Tanzbar, but I should think that you might expect to replace more than just a few duff ones now.

The CGM set of many leather valves (-assuming that they are the right ones for your job) at £9 or so would likely be my choice in a similar position.

Personally, I hate to find myself short one or two bits, having perhaps mucked up some on the way; and would far prefer to be "in hand" with workshop spare parts.
Logged

El-ahrairah

  • Member
  • *
  • Offline Offline
  • Posts: 14
Re: Leather Reed valves for Tanzbar
« Reply #3 on: June 21, 2013, 09:36:25 PM »

I don't know how many valves you have in all in your Tanzbar, but I should think that you might expect to replace more than just a few duff ones now.

Well I was only needing 16 new valves, because there are only 16 individual reeds. Actually there are only 4 reed plates, 4 reeds per plate. Some still work ok but I just thought I would them all. I managed to locate somebody that had 10 of the 16 note Tanzbar song rolls, but if anybody out there knows where I can get more.. let me know. Being a dead medium, they are hard to come by. I got the Flywheel mechanism cleaned up and moving freely now and I am stalking the bellows leaks.

I am in the US so it seems silly to send such a small item from the UK.  I will just look on ebay, I think I found a pack of 25 there.
Logged
All the world will be your enemy, Prince with a Thousand Enemies, and when they catch you, they will kill you... but first they must catch you.

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Leather Reed valves for Tanzbar
« Reply #4 on: June 21, 2013, 09:45:12 PM »

I don't know how many valves you have in all in your Tanzbar, but I should think that you might expect to replace more than just a few duff ones now.

Well I was only needing 16 new valves, because there are only 16 individual reeds. Actually there are only 4 reed plates, 4 reeds per plate. Some still work ok but I just thought I would them all. I managed to locate somebody that had 10 of the 16 note Tanzbar song rolls, but if anybody out there knows where I can get more.. let me know. Being a dead medium, they are hard to come by. I got the Flywheel mechanism cleaned up and moving freely now and I am stalking the bellows leaks.

I am in the US so it seems silly to send such a small item from the UK.  I will just look on ebay, I think I found a pack of 25 there.
It seems that you may be fixed up, then.

I, for one,would love to see some pictures of this instrument, if you can post or point us towards any; and some description of how it works.
Logged

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Logged
Sean McGinnis
Bordentown City, NJ, USA

El-ahrairah

  • Member
  • *
  • Offline Offline
  • Posts: 14
Re: Leather Reed valves for Tanzbar
« Reply #6 on: June 21, 2013, 09:57:34 PM »

Hehehe.. actually yes... and you are very clever! That is the EXACT one, literally . The Winner of that auction was me.  ;D
Logged
All the world will be your enemy, Prince with a Thousand Enemies, and when they catch you, they will kill you... but first they must catch you.

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Leather Reed valves for Tanzbar
« Reply #7 on: June 21, 2013, 10:40:37 PM »

Thanks fo the picture links.

Presumably, when the music roll goes through, it somehow causes reeds to be blown or sounded ( in some way similar to tripping hammers on to strings in player pianos).

How do the bellows operate to provide air?

What do the buttons do?

Please excuse my ignorance, but I'd love to know, from pure interest, exactly how the instrument works. It's a new one on me.
Logged

El-ahrairah

  • Member
  • *
  • Offline Offline
  • Posts: 14
Re: Leather Reed valves for Tanzbar
« Reply #8 on: June 22, 2013, 12:37:53 AM »

oh it is no trouble at all. The Buttons do nothing. They are purely ornamental. The bellows are pumped in and out to provide the pressure, and the level on the side is a ratchet that moves a simple but rather ingenious flywheel mechanism.  Mine plays but needs some minor repairs..  check this out for a example of one in excellent condition.
http://www.youtube.com/watch?v=CJUrUIZm2rM
Logged
All the world will be your enemy, Prince with a Thousand Enemies, and when they catch you, they will kill you... but first they must catch you.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal