Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Helpful Hint ~Warning re screws  (Read 11893 times)

0 Members and 1 Guest are viewing this topic.

Lin Leighton

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 208
  • Castagnari Tommy/ Dino Baffetti BP
Helpful Hint ~Warning re screws
« on: January 19, 2009, 12:34:50 PM »

I bought a brand new Dinio Baffetti Black Pearl II from Music Room just a few weeks ago.  Whilst out playing for our traditional Boxing Day tour I discovered that the screw at the bottom of the cover on the trebel side had come off!!!

Handy Hint No 1 to you all  ..........  remember to check and tighten your screws regularly ( which I'm sure you all do anyway !!)

best wishes

Lin
Logged
Lin(Rattlejag Morris)

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Helpful Hint ~Warning re screws
« Reply #1 on: January 19, 2009, 02:41:58 PM »

Hmmm... I have seen lots of players with a screw loose...:)  not much to do about that though...
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Helpful Hint ~Warning re screws
« Reply #2 on: January 19, 2009, 05:52:52 PM »

With my rather elderly Tommy I also underetake a regular button check as they tend to unscrew themselves and it's difficult to play if they fall of at the start of a set   :)

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Helpful Hint ~Warning re screws
« Reply #3 on: January 19, 2009, 08:20:59 PM »

Ditto with my Morgane, also some button tops tend to come off!
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Lin Leighton

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 208
  • Castagnari Tommy/ Dino Baffetti BP
Re: Helpful Hint ~Warning re screws
« Reply #4 on: January 23, 2009, 02:01:49 PM »

weeelll I contacted Music Room, they said " if I dont hear from them by the middle of the week then assume they cant help" and guess what, I havent heard anything, and then they send me an email inviting me to come along to their one day exposition of all things squeezable including Dino Bafettis! how ironic is that!  ha ha

emmmmmmmmmmmm Theo, I dont spose you have a screw about your workshop that would be suitable , by any chance, do you???    ;)


Lin
Logged
Lin(Rattlejag Morris)

finnhorse

  • Guest
Re: Helpful Hint ~Warning re screws
« Reply #5 on: January 23, 2009, 02:24:21 PM »

Somewhat unrelated, but I twisted the head off one of my Pokerwork screws  ??? -- had a bastard of a time finding a replacement because the keyboard sockets are threaded for that particular part (I eventually located one).  Still waiting for either Hohner to offer accordion parts and service in the United States, or for the whole country to go on the metric system.  Looks like I'll be here for a while.  I understand they're "working on" a service contract with some dealers.

Right, well, if your screws come loose (no one's really interesting without a few loose ones anyway) then don't over-tighten them, either.  Too much torque can be a bad thing.   :)
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Helpful Hint ~Warning re screws
« Reply #6 on: January 23, 2009, 02:24:31 PM »

Lin, I have lots of screws in my workshop, is it just a standard woodscrew? If you can send me a picture, I'll see if I have anything similar.  Is it one of these:
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Helpful Hint ~Warning re screws
« Reply #7 on: January 23, 2009, 02:27:45 PM »

because the keyboard sockets are threaded for that particular part (I eventually located one).  Still waiting for either Hohner to offer accordion parts and service in the United States, or for the whole country to go on the metric system. 

They are just standard 3mm screws, widely available from specialist crew suppliers in Europe, though you might have to buy 100!  I supply them in smaller quantities.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lin Leighton

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 208
  • Castagnari Tommy/ Dino Baffetti BP
Re: Helpful Hint ~Warning re screws
« Reply #8 on: January 23, 2009, 02:36:29 PM »

Hi Theo
You have absolutely what the simple question "Can you send me a picture?" can do to a teminally-bad-at-techno-things person !!!  I think I could manage to send a picture in an email, but definately no idea how to post one on this forum.  the other problem is I am at work, not at home, just now so I cant even look at the box , but I will do so tonight and come back to you.

oh, and emmmmmmmm  ... I only want 1  ::)   ::)
Lin
Logged
Lin(Rattlejag Morris)

finnhorse

  • Guest
Re: Helpful Hint ~Warning re screws
« Reply #9 on: January 23, 2009, 02:59:27 PM »

because the keyboard sockets are threaded for that particular part (I eventually located one).  Still waiting for either Hohner to offer accordion parts and service in the United States, or for the whole country to go on the metric system. 

They are just standard 3mm screws, widely available from specialist crew suppliers in Europe, though you might have to buy 100!  I supply them in smaller quantities.

Oh I know which screw it is - and that was exactly where the problem arose.  You should have seen the looks I got from the Gomers down at the hardware store(s) in town when I asked for metric.  Each one took it upon himself to "inform" me that the United States is not on the metric system. 
Logged

Falseknight

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
    • False Knight
Re: Helpful Hint ~Warning re screws
« Reply #10 on: January 23, 2009, 06:46:09 PM »

Now perhaps you'll see the advantage of our benevolent colonial legacy - what could have been  ;D ;D ;D
Logged

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: Helpful Hint ~Warning re screws
« Reply #11 on: January 23, 2009, 08:57:20 PM »

Falseknight - wash your mouth out with soap and water!  ;) Metric is foreign, ie a metre is a French yard and a litre is a French quart. The Americans are wise to keep away from these evil influences - look how the dollar is going against the pound. It must have something to do with the evil EC spells having to cross running water from Europe or something ....  ???

Thinks (Quick - get back in scope). Yes, Hohner use metric ....
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

finnhorse

  • Guest
Re: Helpful Hint ~Warning re screws
« Reply #12 on: January 23, 2009, 09:35:24 PM »

I swear out British pubs have bigger pints..

EDIT: to reflect that Americans usually call a "pint" a 16 oz. glass, slightly larger than a soda can.
« Last Edit: January 24, 2009, 05:19:02 AM by finnhorse »
Logged

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Helpful Hint ~Warning re screws
« Reply #13 on: January 26, 2009, 11:55:08 AM »

I swear out British pubs have bigger pints..

EDIT: to reflect that Americans usually call a "pint" a 16 oz. glass, slightly larger than a soda can.

FYI most American pubs will actually (and IMO scandalously!) serve you 14 oz. as a "pint."  About a month or two ago I heard an NPR story about someone who has been out there taking measurements! 
(I guess everyone needs a hobby.)
-Andy

BruceHenderson

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 262
Re: Helpful Hint ~Warning re screws
« Reply #14 on: January 26, 2009, 12:29:24 PM »

  I swear out British pubs have bigger pints..   
EDIT: to reflect that Americans usually call a "pint" a 16 oz. glass, slightly larger than a soda can. 

   Yes, we use the old "wine gallon" for everything liquid.  It has a decided advantage in an economy that used to be highly agricultural in that "US liquid measurements" were the same as "dry measurements".  A "dry quart" of wheat seed would have been equivalent to a "quart" of machinery oil to a Kansas farmer in the old days.
   I think that the "wine gallon" isn't used or even legal since the standardization of the "Imperial System for Liquid Measurements" in the UK.  The Imp. gallon/quart/pint is based on the traditional "ale gallon" so it's certainly appropriate for use for beer these days.
   And, of course, there's the usual bit of disagreement about what a "fluid ounce" is, so 16 US fl. oz. is equivalent to about  17.4 UK fl. oz.
   It's a pity that the larger UK measurement doesn't mean that you get more.  When I was in the UK for MAW, I noticed that the usual "dollars for pounds" rule is still in effect -- a CD that's $15 is 15 UKP, a ball point pen ("biro") that's 99 cents is 99 pence, etc.  Must be something in the air ...  :(
Logged
I love one-rows!  Four reeds kick butt!!!!

Martin J

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 902
  • Poole, Dorset
Re: Helpful Hint ~Warning re screws
« Reply #15 on: January 26, 2009, 02:29:29 PM »

Hi Theo
 but definately no idea how to post one (picture) on this forum. 

Lin
Just below this box you type in is a +Additional Options...   Press this then browse for the pic you want (has to be somewhere on your computer) highlight the file name and it will appear just as Theo's srew pic did - magic
Logged
Castagnari, Weltmeister, Giustozzi, Streb, too many Hohners.  No Strings Attached ceilidh band

C age ing

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 434
  • New fangled melodeon?
Re: Helpful Hint ~Warning re screws
« Reply #16 on: January 26, 2009, 05:42:35 PM »

Blame all this weight and measures stuff on the Victorians. Matching the massive Empire with an equivalent ego, they decided that the one hundred pound hundredweight was a bit wimpish so upped it to one hundred and twenty-eight, which handily was a nearer approximation for a metric tonne. The pint also rose to twenty fluid ounces. Recall with horror when the Radar company I worked for used both systems on their drawings. The problem was that the International Standards Organisation's mensuration standards only recognised kilometres and millimetres at the time, so the draftsmen complained that it took more time to stencil the measurements, than to actually draw even complex plans.
Be thankful though as Scandinavia and Russia used to use a temperature scale with 0 as freezing point and 80 as the boiling point of water, Reumar or something.
Bring back the Groat and the horrors of Whitworth, BSP, BSC, BSM, BSF, Gas, Unified and all the other threads.
Old Bill.
Logged
My Erika is as old as me. Luckily, it is not as decrepit.

Bill the Farmer

  • Not quite so
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 497
  • Hohner Club, Liliput...
    • Bill Farmer
Re: Helpful Hint ~Warning re screws
« Reply #17 on: January 26, 2009, 06:23:20 PM »

I bought some Whitworth coach bolts on eBay the other day.  ;D
Logged
Bill of Old Radipole Village

Martin J

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 902
  • Poole, Dorset
Re: Helpful Hint ~Warning re screws
« Reply #18 on: January 26, 2009, 06:28:41 PM »

Bring back the horrors of Whitworth, BSP, BSC, BSM, BSF, Gas, Unified and all the other threads.
Old Bill.
What with you and Bill, "I bought some Whitworth coach bolts on eBay the other day", this is becoming a wide ranging thread.  boom, boom
Logged
Castagnari, Weltmeister, Giustozzi, Streb, too many Hohners.  No Strings Attached ceilidh band

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Helpful Hint ~Warning re screws
« Reply #19 on: January 26, 2009, 06:56:38 PM »

Blame all this weight and measures stuff on the Victorians. Matching the massive Empire with an equivalent ego, they decided that the one hundred pound hundredweight was a bit wimpish so upped it to one hundred and twenty-eight, which handily was a nearer approximation for a metric tonne.

When I went to school a stone was 14lb, a quarter (hundredweight) was 28lb and a hundredweight was 112lb.  Was that a new slimmed down 1950s hundredweight? :o
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal