Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Refacing pallets - material?  (Read 5301 times)

0 Members and 1 Guest are viewing this topic.

jphill

  • Member
  • *
  • Offline Offline
  • Posts: 17
Refacing pallets - material?
« on: July 22, 2013, 10:15:28 AM »

I'm sure this will have been asked before but I can't find it... I want to reface the pallets on an old 21 button Hohner with the aim of reducing 'clacking'.

Can anyone suggest the best material to use for this please? Is there something sold for purpose?

Logged

Sage Herb

  • Steve Harrison
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 762
  • Slaithwaite, UK
    • The Black Box Band
Re: Refacing pallets - material?
« Reply #1 on: July 22, 2013, 10:21:39 AM »

Yes, get stuff from this wonderful company: http://www.cgmmusical.co.uk/CGM_Musical_Services/Felt_Leather_Pallets.html

Some choices about thickness to make though, and no doubt more expert advice will be along soon!

Cheers
Steve
« Last Edit: July 22, 2013, 10:23:32 AM by Sage Herb »
Logged
Hohner Erikas & Club 2s
Hohner gob-harps:
Vega Senator 5-string banjo; Alex Burns plectrum guitar

Black Box Band - www.theblackboxband.co.uk
Annie Dearman & Steve Harrison - www.dearmanharrison.co.uk
Phoenix - www.phoenixdanceband.co.uk
http://soundcloud.com/sage-herb

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Refacing pallets - material?
« Reply #4 on: July 22, 2013, 01:19:48 PM »

Concur, though I use a lot and glue up the felt and leather myself.  A total thickness of 2 to 2.5mm makes the pallets quieter by a useful amount and seems to be about the most you use in a Hohner.   Hohners original pallet facing is usually just leather and only 1mm or even less.  As a consequence you may have to bend the levers to get the button height back up to where you want it.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

jphill

  • Member
  • *
  • Offline Offline
  • Posts: 17
Re: Refacing pallets - material?
« Reply #5 on: July 22, 2013, 07:28:13 PM »

Many thanks for all this info. Very useful!

Probably a stupid question, but I'm guessing best practice is to remove the pallets from the wires, then reface, then fix back again? (And number the pallets so you know where they came from?)
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Refacing pallets - material?
« Reply #6 on: July 22, 2013, 07:34:19 PM »

Don't know about best practice, but that's what I do; though in truth I don't worry too much about replacing each pallet in its original position. Of course, once you've removed, cleaned up and refaced your pallets you'll be faced (pun intentional) with the question of the best way of refixing them; I'll leave  that can of worms till you get to it  ;)!

Best of luck
Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Refacing pallets - material?
« Reply #7 on: July 22, 2013, 07:45:29 PM »

Many thanks for all this info. Very useful!

Probably a stupid question, but I'm guessing best practice is to remove the pallets from the wires, then reface, then fix back again? (And number the pallets so you know where they came from?)

It is essential that you remove the pallets when you reface them as the new, thicker, material will require the pallets to go back on at a different angle to obtain a successful seal. The preferred adhesive to refit the pallets is hot glue as it is possible to remove it if needs be.

Numbering the pallets is not needed as they are churned out by a machine so are all fairly similar.

penn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 574
Re: Refacing pallets - material?
« Reply #8 on: July 22, 2013, 08:27:36 PM »

I'm working myself up to refacing the pallets on a 30's-ish brown Erika and on this box the keys clack against the bottom of the keyboard too. It looks as if there may have been some padding there at some time and they disappear a tiny bit down the holes. My question is, is this same leather-faced felt suitable for that job too? Or should I be stopping them off with strips of wood closer to the pivot point like the pokerwork mod?
thanks , Steve
Logged
Hohners, Dino Baffetti, Lilly, Benny + a lot of junk.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Refacing pallets - material?
« Reply #9 on: July 22, 2013, 08:34:36 PM »

In the Erika it is simpler because the keyboard top is removable.  You need thicker and harder felt than that used on the pallets. I use a 4mm thick check felt as used in pianos.  If you use a soft felt the thin metal levers dig in and wear the felt quite quickly.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

penn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 574
Re: Refacing pallets - material?
« Reply #10 on: July 22, 2013, 08:38:56 PM »

Thanks Theo, as I thought harder about it the 2.5mm was starting to seem a bit thin. I hadn't been expecting to have to disassemble the piano tho', shall have to wait til the wife's out.
thanks , Steve
Logged
Hohners, Dino Baffetti, Lilly, Benny + a lot of junk.

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Refacing pallets - material?
« Reply #11 on: August 01, 2013, 07:49:31 AM »

I found a strip of leather over the felt behind the keyboard ,prevented the felt from getting worn.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Mutt

  • Melodiate
  • Good talker
  • **
  • Offline Offline
  • Posts: 98
  • D/G Saltarelle Infeno, D/G Club IIb, A/D Pokerwork
Re: Refacing pallets - material?
« Reply #12 on: August 01, 2013, 07:53:50 PM »

In the Erika it is simpler because the keyboard top is removable.  You need thicker and harder felt than that used on the pallets. I use a 4mm thick check felt as used in pianos.  If you use a soft felt the thin metal levers dig in and wear the felt quite quickly.

Theo, do you glue the felt down or do you tack it somehow?  If glue, do you use hot glue again?
Logged
George Knight
Anchorage, Alaska
Yes, brrrrrrr!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Refacing pallets - material?
« Reply #13 on: August 01, 2013, 08:50:23 PM »

Not hot melt, it would leave lumps. Any thick liquid glue will work, pva, clear universal glue, contact adhesive. Anything that won't soak into the felt.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Refacing pallets - material?
« Reply #14 on: August 01, 2013, 08:55:25 PM »

Not hot melt, it would leave lumps. Any thick liquid glue will work, pva, clear universal glue, contact adhesive. Anything that won't soak into the felt.
[/quote

Totally agree  ;D
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal