Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Hohner 1140C slow reeds  (Read 7592 times)

0 Members and 2 Guests are viewing this topic.

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Hohner 1140C slow reeds
« on: July 30, 2013, 12:34:02 PM »

When I bought it I met the guy in a public place so I tested it in the open air (not indoors). To hear it properly I gave it a bit of gusto. Now I have it home and am trying to play a little quieter some of the reeds on the pull are slow starters. The reed plate of is glued in to these boxes flat onto the pallet board. I think that my slow starting reeds are on the underside. I have read that the reeds could be choking because the reed tip is too close to the body  I can lift the valve and spring the reed. I have a tried this several times times and do not notice much difference. I have also peeked under the push reed and it looks like my valves are in place on the underside.

Any advice would be appreciated.

http://forum.melodeon.net/index.php/topic,12791.0.html
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hohner 1140C slow reeds
« Reply #1 on: July 30, 2013, 12:43:25 PM »

Chances are that the box needs an overhaul, every 1140 I have met has benefited greatly from new wax, new valves, a tune and having the reeds set.

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Hohner 1140C slow reeds
« Reply #2 on: July 30, 2013, 11:35:08 PM »

Now I have it home and am trying to play a little quieter some of the reeds on the pull are slow starters.

http://forum.melodeon.net/index.php/topic,12791.0.html

If reeds are slow to speak it's usually because the reed tongues are set too high.

The pull reeds are indeed on the underside of the plates. You will need to pull the tongues up through the plates either with a strong magnet for the larger reeds or a thin brass reed "pinger" under the tip of the reed and pull it through. It's a bit tricky if you aren't used to it but it works. You will then need to gently bend the tongues towards you, too much and the reeds will choke.

Have fun!

Martyn
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner 1140C slow reeds
« Reply #3 on: July 30, 2013, 11:56:54 PM »

There is another possible reason for reeds being slow to respond and this model is particularly affected.  That is valve trouble, it is quite common for valves to come loose and even fall off because the adhesive holding them has failed. Sometimes you can find valves lying loose inside the instrument, hidden in the bellows folds, or even stuck under pallets.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Hohner 1140C slow reeds
« Reply #4 on: July 31, 2013, 04:14:38 AM »

This box looks new. I think it has hardly been played. I will take the treble mechanism off and peek through the holes. Whilst it is off, I think I will put new leather/felt on the pallets.
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner 1140C slow reeds
« Reply #5 on: July 31, 2013, 08:23:23 AM »

The valve adhesive problem seems to be related to age more than use. I suspect that Hohner tried using new adhesives during the 60s and 70s when a lot of these would have been made. So even with your box looking like new it is still something worth checking.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Hohner 1140C slow reeds
« Reply #6 on: July 31, 2013, 10:26:02 AM »

This box looks new. I think it has hardly been played. I will take the treble mechanism off and peek through the holes. Whilst it is off, I think I will put new leather/felt on the pallets.

You probably know this already Steve but screw the action back on before you re-attach the pallets, otherwise they will never seat properly. You may also find you need to raise the button height slightly if you are using a thicker pallet facing.

Martyn
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Hohner 1140C slow reeds
« Reply #7 on: July 31, 2013, 04:32:28 PM »

Just wanted to add; what a wonderful site this is…3 of the melodeon masters on the same page for help…loving the mel.net even more. :|||: :||:
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Hohner 1140C slow reeds
« Reply #8 on: August 02, 2013, 08:38:48 PM »

So the reed blocks on these Hohner one row 4 stop boxes are glued in place - how do you get them out/put them back to redo the wax/retune etc?

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hohner 1140C slow reeds
« Reply #9 on: August 02, 2013, 08:45:05 PM »

So the reed blocks on these Hohner one row 4 stop boxes are glued in place - how do you get them out/put them back to redo the wax/retune etc?

You don't, which makes rewax and tune infinitely harder  :(

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner 1140C slow reeds
« Reply #10 on: August 02, 2013, 08:53:37 PM »

So the reed blocks on these Hohner one row 4 stop boxes are glued in place - how do you get them out/put them back to redo the wax/retune etc?

There are not any reed blocks. The reeds are mounted flat on a raised wood grid, but you could not really call it a block.  Lester exaggerates slightly. The waxing process is no more difficult than on conventional blocks, but tuning takes a little longer.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hohner 1140C slow reeds
« Reply #11 on: August 02, 2013, 08:58:17 PM »

So the reed blocks on these Hohner one row 4 stop boxes are glued in place - how do you get them out/put them back to redo the wax/retune etc?

There are not any reed blocks. The reeds are mounted flat on a raised wood grid, but you could not really call it a block.  Lester exaggerates slightly. The waxing process is no more difficult than on conventional blocks, but tuning takes a little longer.

Theo underexaggerates slightly, the waxing is a right royal PITA  (:) But I have only done 1 so far.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Hohner 1140C slow reeds
« Reply #12 on: August 02, 2013, 09:39:30 PM »

Lester seems to be on about 4 stops after replying to Roger (which are a pain to wax) whereas Theo about the 1040 which was the subject of this thread (which is easy) .......... Both are Right
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Hohner 1140C slow reeds
« Reply #13 on: August 04, 2013, 11:05:45 AM »

OK. So the grid on which the reeds are mounted is glued in.. So how do you pass air across them when tuning?

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner 1140C slow reeds
« Reply #14 on: August 04, 2013, 11:09:29 AM »

You place the whole end of the instrument on an open tuning bellows like this, or you can improvise something similar using the rest of your own instrument.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hohner 1140C slow reeds
« Reply #15 on: August 04, 2013, 11:16:30 AM »

You place the whole end of the instrument on an open tuning bellows like this, or you can improvise something similar using the rest of your own instrument.

I heve a piece of thin MDF shaped to fit into a bellows fold and hang the bellows and bass end from it and use them as my tuning rig:



Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Hohner 1140C slow reeds
« Reply #16 on: August 04, 2013, 01:35:23 PM »

Hi Theo and Lester, thank you for explaining this. 

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Hohner 1140C slow reeds
« Reply #17 on: December 24, 2013, 06:10:06 AM »

Lester seems to be on about 4 stops after replying to Roger (which are a pain to wax) whereas Theo about the 1040 which was the subject of this thread (which is easy) .......... Both are Right

On the 114 (D in my case) there are two reed blocks glued side by side. How on earth do you rewax the reed plates facing each other? There is v little space between them and it looks to me as though the blocks are glued into place after the reeds have been waxed, because they are also held in place by those roundy headed tacks. I can't see how you would drive them in on the two sets of reeds facing each other, so they must have been put in during manufacture before the blocks are glued.
And is there a mod to make these reed blocks removable and fix back in-able, to facilitate sensible maintenance, or do the esteemed repairers make a set of tools to work in this confined gap between blocks, much like working under  the hood of a racing Mini, with no room to get yer hand, let alone a spanner.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner 1140C slow reeds
« Reply #18 on: December 24, 2013, 09:09:46 AM »

You work in the space available.  The nails can be discarded, so that helps. But waxing and tuning are more awkward than with removable blocks.

I have seen examples where the blocks have been made removable, but you risk doing serious damage to the blocks,a nd especially  the pocket for the register slides.  There is a lot if very flimsy woodwork in there.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Hohner 1140C slow reeds
« Reply #19 on: December 24, 2013, 09:58:40 AM »

Thanks Theo. I can see how trying to remove the blocks could completely wreck the box. Peculiar design, though, glueing them in.
Tuning will be interesting :)
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal