Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Cleaning reedblocks  (Read 4005 times)

0 Members and 1 Guest are viewing this topic.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Cleaning reedblocks
« on: August 02, 2013, 09:39:50 AM »

I thought this could be an interesting topic I don`t recall being mentioned in recent times -

I just wondered how others undertook the very messy job of removing the reeds and cleaning up the blocks of old wax . I learned fast that hard old wax bits and dust gets into everywhere and flicks all over the place

I now do it wearing rubber gloves in a clear plastic bag and using an old large craft knife blade (which is now pretty blunt) - first numbering all the reeds with a fine tip CD labelling marker, put the whole reedblock in the bag,  flip the reeds off and clean the wax bits off . place the reeds on an old baking tray in order and then in the bag, scrape the wax off the blocks with the none sharp edge of the blade when its mostly off, finish off with the sharper edge to get them really clean .. brush the wax-less blocks with a nailbrush afterwards .

If anyone has an even less messy way, lets hear it :)

As for cleaning the reeds, I just pull the old valves off and scrape the glue residue off with another smaller craft knife blade making sure the reed channel is clear of the stuff too .. is an ultrasonic cleaner of any real benefit ,, I have a small jewelry one which I can`t imagine doing much good as it uses a motor and not Piezos , what liquid do you use in the cleaner ?

Thanks
« Last Edit: August 02, 2013, 09:41:42 AM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Cleaning reedblocks
« Reply #1 on: August 04, 2013, 09:24:52 PM »

I use a blunt knife for scraping off the wax - the reeds are taken off first, and placed in line on a clear bit of table. I finish the blocks with a few swipes from sandpaper, grit 120.

I clean the reeds with steel wool, first the tongues with a reed-flipper under it for support, and then the whole plate afterwards. I usually avoid metal scraping tools, even for the worst valve residue - and if used, I make sure not to scrape the surface.
Logged

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Cleaning reedblocks
« Reply #2 on: August 04, 2013, 09:40:40 PM »

I just take mine to Theo......

(Other repairers are available.....)
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Cleaning reedblocks
« Reply #3 on: August 04, 2013, 09:49:28 PM »

Blunt knife etc, but more importantly a face mask as all the wax dust gives me asthma.

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Cleaning reedblocks
« Reply #4 on: August 04, 2013, 09:55:50 PM »

Pikey.. I've got one of those, it's called Microbot.. ;)
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Cleaning reedblocks
« Reply #5 on: August 04, 2013, 10:07:39 PM »

Thanks for the reed cleaning tips, I was a bit wary about steel wool on reeds because of getting bits stuck between the tongue and the plate near the rivet end so will try it with a reedlifter underneath - I was thinking of a brass brush ? or one of those tiny fine wire brushes?  .

looks like we`re all cleaning the blocks in much the same way . I find doing it in a clear bag contains the fallout ...
Logged
Q: How do you cure MAD?
A: Buy more Boxes

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Cleaning reedblocks
« Reply #6 on: August 04, 2013, 11:22:46 PM »

I use a Fiber Glass pencil

I wear a mask, long sleeves and gloves (maybe I should buy some evening gloves!). It gets rust off without leaving a mark.

Stephen
« Last Edit: August 05, 2013, 01:08:09 AM by syale »
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Cleaning reedblocks
« Reply #7 on: August 05, 2013, 07:45:17 AM »

I`ll give the glass fibre pencil a look - Evening gloves are fine until the Diamantes fall off into the box and the feathers from the end get stuck to the reedwax etc - stick with the longest rubber Marigolds you can find .
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Cleaning reedblocks
« Reply #8 on: August 05, 2013, 08:02:32 AM »

Not a fan of fibreglass pencils myself as they leave little bits of fibre which can be problematic. My reed cleaner of choice is Abrasive Cleaning Block

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Cleaning reedblocks
« Reply #9 on: August 05, 2013, 09:32:58 AM »

A suede shoe brush works a treat in getting off old wax from blocks.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Cleaning reedblocks
« Reply #10 on: August 05, 2013, 02:44:10 PM »

For me it's an old Stanley knife blade, old toothbrush and brass brush to clean the block.  Fine (320-400) sandpaper to clean the reed.  Using only one-way strokes from rivets towards reed tip helps avoid stuff stuck under the reed.   
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Cleaning reedblocks
« Reply #11 on: August 05, 2013, 03:22:27 PM »

Syale, where can one get a glass fibre pencil?
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Cleaning reedblocks
« Reply #12 on: August 05, 2013, 03:29:24 PM »

Syale, where can one get a glass fibre pencil?

He gets his at Radio Shack or Home Store or some other American Store.  ;)

You could try Maplins but you will be better off with Cleaning Block honest.

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Cleaning reedblocks
« Reply #13 on: August 05, 2013, 04:25:07 PM »

Not a fan of fibreglass pencils myself as they leave little bits of fibre which can be problematic. My reed cleaner of choice is Abrasive Cleaning Block

Same here. If you're like me and prefer to work barehanded, those bits of shed fibreglass make your fingers into pincushions; as well as needing a lot of careful cleaning up, on, in and outside the instrument.
Logged

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Cleaning reedblocks
« Reply #14 on: August 06, 2013, 12:29:34 PM »

I was just reading up on this, having taken up the task of fixing up a friend's ancient 2 row.  Was pleased to read about someone using a short steel ruler to scrape off wax - that was what I'd been using, but only because it was there.  Those are way too big to get into corners of course but work well for the exterior.

I fashioned a scraper out of boxwood, which is really dense, to clean up blocks.  Have been using it a lot as a scoop for fresh wax, too.  Have no idea whether this is how it's really done, which is another common thread I've read from repairers here - that they just took a crack at whatever might work, and used what did.

There are really involved descriptions here about using ultrasonic cleaners etc, some of which sound really over-the-top - one fellow was taking blocks to a watchmaker to have the blocks practically pickled, really caustic chemicals, etc.  Can't relate to that myself but then again I'm just scraping wax into piles on my work bench and then sweeping them into the trash can...

Repairing these things is really time consuming, I have to say.  It's nice to be able to flip reeds and carry out minor repairs, but working on even this two row is really gobbling up the hours.  It gives you a real respect for those who can revalve an entire box and all that.
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Cleaning reedblocks
« Reply #15 on: August 06, 2013, 03:40:25 PM »

You`re not kidding it`s time consuming, I thought it was because we (meaning "own-box-fettlers") aren`t setup to do it for max efficiency ..

I`ve completely cleaned, waxed and valved two treble end Hohner reedblocks today - it`s a Piano box based on the Pokerwork called the "Soloist" - so basically a 2915 with a crude piano action instead of a fingerboard so nothing massive (22 notes over 2 voices) and doing it in stages of reed removal / cleaning / labelling & Block cleaning , then cleaning the reeds and valving , then waxing back in , finishing and testing - began about 9:00Am and ended at 3:00Pm .

OK I had bits of proper work to do as well (sorting out peoples pictures ready for print etc) but it was an open day I laid aside for getting this pesky box done - I`m sure Lester could have one it in a third of the time and Theo or Mike Rowbotham while they slept but for an occasional fettler, Yup it eats time.

EDIT ..... when I`ve done this before, I`ve done a block one week, another the next or split a block over two days (time contraints etc) this is the first time I`ve done a whole treble end in one day ..... for the record, I did the pallets and facings at both ends, bellows gasket, re-set the action, did the sealing etc about a month ago so wanted to get it done. all it needs now are strap brackets and bass / bellows straps

the Blocks now done - thankfully its IN TUNE :)



« Last Edit: August 06, 2013, 03:49:46 PM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal