Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: de-clubbing  (Read 4274 times)

0 Members and 1 Guest are viewing this topic.

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
de-clubbing
« on: January 23, 2009, 12:58:03 PM »

when declubbing a club melodeon I understand that the draw C reed can be tuned up to D.  Is it common to also change th eflat basses to bflat?  If so how is it done?  I would think that retuning here would not be possible.
Logged

Falseknight

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
    • False Knight
Re: de-clubbing
« Reply #1 on: January 23, 2009, 06:44:06 PM »

Why retune though?  Club layout works well - especially with the accidentals.

Now Club in D/G would be interesting.
Logged

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: de-clubbing
« Reply #2 on: January 23, 2009, 06:53:51 PM »

Why retune though?  Club layout works well - especially with the accidentals.

Now Club in D/G would be interesting.

I haven't decided to do it.  I just wondered how it was done.
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: de-clubbing
« Reply #3 on: January 17, 2011, 09:02:53 AM »

Browsing around for potentially useful info to help with the rebuild of a C/F ClubII, I ran across this thread - is it feasible to sharpen the pull C by a whole tone, or should I replace the reedplate with an "as nature intended" C push/D pull one? I know it's\possible to sharpen a reed by a semitone, but is a whole tone do-able?

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: de-clubbing
« Reply #4 on: January 17, 2011, 10:45:12 AM »

Browsing around for potentially useful info to help with the rebuild of a C/F ClubII, I ran across this thread - is it feasible to sharpen the pull C by a whole tone, or should I replace the reedplate with an "as nature intended" C push/D pull one? I know it's\possible to sharpen a reed by a semitone, but is a whole tone do-able?

Graham
I had this very conversation with Theo just a couple of weeks ago, as I have a C/F Club III which I am about to start restoring.

On the gleichton reed plate, Theo says that it is possible to sharpen the C pull reed to D pull, but it needs very careful filing and is a real test of your tuning/filing skills. I think it is probably just about the limit which can be achieved on a reed in this part of the range.

Fitting a new C push / D pull reed is a safer option and, if you keep the C/C reeds safely, also allows the instrument to be re-clubbed at a later date if desired (perhaps by another owner).

An alternative suggested by Theo is to look for a pair of C#/C# reeds from an old accordion. The push C# can be flattened by a semitone to C, and the pull C# can be sharpened by a semitone to D. It involves tuning more reeds but it is not as traumatic for the reed tongues to alter them by a semitone.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: de-clubbing
« Reply #5 on: January 17, 2011, 01:32:54 PM »

As the original poster of this thread I will give some follow up.  The instrument that prompted the question is a beautiful wooden Erika that has H reeds on zinc plates which are in excellent condition.  After gaining some experience tuning I did finally declub the Gleichton but still have not done the basses.  It worked out very well and I'm very glad that I did it because I play it much more now with the standard tuning.  This is how I did it:  I removed the reed plates and used a conical grindstone on a Dremel tool to remove metal from the end of the reed staying carefully away from the edges of the reed so as not to affect the profile of the reed at all nor the thickness of the reed tip at the edges.  The results were excellent.
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: de-clubbing
« Reply #6 on: January 17, 2011, 01:57:43 PM »

Thanks both - very useful replies.  I take the point about the ability "re-club" should it be required, and I also like the idea of harvesting C#/C# reeds from a scrap accordion and retuning them; that probably wouldn't have occurred to me, but now it's been pointed out it does seem a very sensible way of producing pairs of notes for various special applications.  On the other hand, now that I know it CAN be done, I might well give it a go........whichever way I go I'll now have a Plan B!

Cheers
Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: de-clubbing
« Reply #7 on: January 17, 2011, 02:10:32 PM »

As the original poster of this thread I will give some follow up.  The instrument that prompted the question is a beautiful wooden Erika that has H reeds on zinc plates which are in excellent condition.  After gaining some experience tuning I did finally declub the Gleichton but still have not done the basses.  It worked out very well and I'm very glad that I did it because I play it much more now with the standard tuning.  This is how I did it:  I removed the reed plates and used a conical grindstone on a Dremel tool to remove metal from the end of the reed staying carefully away from the edges of the reed so as not to affect the profile of the reed at all nor the thickness of the reed tip at the edges.  The results were excellent.

Well done! From what Theo and others have said, that was quite an achievement and apparently using a dremel for tuning requires a good deal of skill and a very steady hand ;)
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: de-clubbing
« Reply #8 on: January 17, 2011, 05:35:16 PM »

As the original poster of this thread I will give some follow up.  The instrument that prompted the question is a beautiful wooden Erika that has H reeds on zinc plates which are in excellent condition.  After gaining some experience tuning I did finally declub the Gleichton but still have not done the basses.  It worked out very well and I'm very glad that I did it because I play it much more now with the standard tuning.  This is how I did it:  I removed the reed plates and used a conical grindstone on a Dremel tool to remove metal from the end of the reed staying carefully away from the edges of the reed so as not to affect the profile of the reed at all nor the thickness of the reed tip at the edges.  The results were excellent.

Well done! From what Theo and others have said, that was quite an achievement and apparently using a dremel for tuning requires a good deal of skill and a very steady hand ;)

Aside from removing a lot of material very quickly, I understood that using a rotary tool like Dremel was not advisable because it could interfere with the tempering of the steel. Can anyone verify this?

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: de-clubbing
« Reply #9 on: January 17, 2011, 06:24:09 PM »

As the original poster of this thread I will give some follow up.  The instrument that prompted the question is a beautiful wooden Erika that has H reeds on zinc plates which are in excellent condition.  After gaining some experience tuning I did finally declub the Gleichton but still have not done the basses.  It worked out very well and I'm very glad that I did it because I play it much more now with the standard tuning.  This is how I did it:  I removed the reed plates and used a conical grindstone on a Dremel tool to remove metal from the end of the reed staying carefully away from the edges of the reed so as not to affect the profile of the reed at all nor the thickness of the reed tip at the edges.  The results were excellent.

Well done! From what Theo and others have said, that was quite an achievement and apparently using a dremel for tuning requires a good deal of skill and a very steady hand ;)

Aside from removing a lot of material very quickly, I understood that using a rotary tool like Dremel was not advisable because it could interfere with the tempering of the steel. Can anyone verify this?

I have to say that would be my instinctive thought - Dremels & their clones run at very high speeds and generate quite a bit of heat. On the other hand, people seem to get decent results from them, so maybe with a VERY light touch and VERY short bursts they might be OK.  Personally I'm inclined to stay with a hand-file, with which I feel much more in control. Horses for courses, I guess....
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: de-clubbing
« Reply #10 on: January 17, 2011, 07:03:04 PM »

I've used the conical grindstone dremel tool quit a bit for tuning and I've never had any problem with overheating anywhere near close to what would affect the temper of the steel.  The reed itself is an excellent heat sink and I use a metal shim underneath. The rate at which it removes metal is not "very fast".  If it were it would not be controllable and therefore not useful for tuning.  I find it very precise and controllable.  Even as a rank beginner just starting out, I never ruined any reeds with it.  It has an advantage over the hand file in the de-clubbing operation because you can remove sufficient metal from the tip of a reed to raise the pitch a full tone without touching the edges of the reed at all.  You end up with a hollowed out 'dimple' at the tip of the reed which sounds just like a reed originally made at that pitch.
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: de-clubbing
« Reply #11 on: January 17, 2011, 07:31:00 PM »

So you use the tool along the axis of the reed rather than across it?
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: de-clubbing
« Reply #12 on: January 17, 2011, 11:12:02 PM »

So you use the tool along the axis of the reed rather than across it?

Yes.  Hold it so that if it 'grabs and skitters' it will move toward the base of the reed and not toward the tip or sides where it might do some damage.  I don't use it for small reeds, of course, but for the larger reeds I find it very handy.  I actually don't use a metal file at all.  I use sandpaper 'files' of 180 grit paper glued to the squared off ends of wooden popsicle sticks for fine tuning and for the small reeds.
Logged

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: de-clubbing
« Reply #13 on: January 18, 2011, 05:13:38 PM »

I've used the conical grindstone dremel tool quit a bit for tuning and I've never had any problem with overheating anywhere near close to what would affect the temper of the steel.  The reed itself is an excellent heat sink and I use a metal shim underneath. The rate at which it removes metal is not "very fast".  If it were it would not be controllable and therefore not useful for tuning.  I find it very precise and controllable.  Even as a rank beginner just starting out, I never ruined any reeds with it.  It has an advantage over the hand file in the de-clubbing operation because you can remove sufficient metal from the tip of a reed to raise the pitch a full tone without touching the edges of the reed at all.  You end up with a hollowed out 'dimple' at the tip of the reed which sounds just like a reed originally made at that pitch.

I have found that an unbridled Dremel tool can wreak havoc very quickly. I won't deny the usefulness of the tool, however. I have devised a method to control the speed of the tool via a dimming control (as used for incandescent lighting), whereby the rpm speed of the tool can be very precisely regulated. This means more accurate control for material removal, and less heat generated. I have not used the Dremel on reeds, however, for over a decade, having found it too aggressive. Personally, I prefer the old slow hand filing.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal