Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3 4   Go Down

Author Topic: How to efficiently ruin an accordion  (Read 19011 times)

0 Members and 1 Guest are viewing this topic.

streb

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 100
Re: How to efficiently ruin an accordion
« Reply #20 on: August 19, 2013, 10:07:40 PM »

My approach is to consider what Stradivari would have done if power tools had been available to him. To paraphrase, it is not the high speed router bit that is the problem but the nut that is holding it.
Logged

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: How to efficiently ruin an accordion
« Reply #21 on: August 19, 2013, 10:24:00 PM »

Is the dremel any worse than the power tool used to make the reed in the first place ? - http://www.youtube.com/watch?v=GgYYyn72HLI
2 minutes in

   The grinder being used is part of the manufacturing process, the operator knows exactly what he is doing. If he somehow makes an error, the reed goes into the scrap bin. Not a big loss.
   Much different for a tuner in some far corner of the world with a 10,000 rpm dremel trying to do freehand grinding on a reed that might be very difficult to replicate. I have nothing against power tools, but I have seen them wreak havoc in the wrong hands.
Logged

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: How to efficiently ruin an accordion
« Reply #22 on: August 19, 2013, 11:34:19 PM »

I can wreak havoc with a file in the wrong hand.
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: How to efficiently ruin an accordion
« Reply #23 on: August 20, 2013, 05:10:05 AM »

I have nothing against power tools, but I have seen them wreak havoc in the wrong hands.

Not only IN, but ON the wrong hands....
Logged
Tuner/repairer, now retired.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: How to efficiently ruin an accordion
« Reply #24 on: August 20, 2013, 06:43:35 AM »

Is the dremel any worse than the power tool used to make the reed in the first place ? - http://www.youtube.com/watch?v=GgYYyn72HLI
2 minutes in

The carefully regulated abrasive action of the flat linishing belt with a pressure pad to keep things constant is quite different from the aggressive cutting action of a high-speed rotary tool, especially one which depends solely on its operator's steadiness of hand.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Colombia20102018

  • Member
  • *
  • Offline Offline
  • Posts: 19
Re: How to efficiently ruin an accordion
« Reply #25 on: August 21, 2013, 03:59:44 PM »

I am not sure how accordions are tuned in Mexico. The guy in your video is Mexican. In Colombia we have "Técnicos Afinadores" to do this kind of job. It is very common to change the tune of your accordion for professional accordionists in Colombia (acordeoneros). They change the tunes to add more color or variety to their songs. In Colombia we have thousands of songs played with the accordion. This causes that after a while, many songs started to sound very similar, then they change the tune to make them sound different. The most common accordion used in Colombia is the Hohner Corona III which is a three row diatonic accordion. The stores sell them in the basic tones GCF, ADG, and BEbAb. Each letter meaning the tune one each row. It is very common to convert a GCF to a CFBb, a ADG to a DGC, a BEbAb to a BEA, etc. Basically you can changed it to any combination as long as you keep the harmony of (I, IV, V). Middle row = I, outside row = V and inside rom = IV. The link below is part of a Colombian documentary with subtitles in English where they show how the tune of the accordion is changed. The technician in the video lives in a very small town in Colombia near a desert but Colombia is mostly green, so please do not think that all the Country is like this  ;). You can watch the full documentary in youtube. Let me know what you think.
Video title: Acordeón del Diablo (Francisco el Hombre - Pacho Rada) Part 6
Link:
http://www.youtube.com/watch?v=4y3pQINzKY0
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: How to efficiently ruin an accordion
« Reply #26 on: August 21, 2013, 04:23:09 PM »

Great video - thanks for posting.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: How to efficiently ruin an accordion
« Reply #27 on: August 21, 2013, 04:58:30 PM »

A professional tuner will always try and leave as few traces as possible, not only for aesthetic reasons but also in order to traumatize the reed as little as possible. We try and get it right the first time!  When I come across instruments that were "tuned" with a dremel or similar tools I very often notice that there are ugly marks both near the base and on the tip of the reed (and very often about half way in between, whatever the purpose of such an action may have been) which means that the "tuner" first went too low, than too high , repeating  this procedure probably several times before getting it, with some luck,  right (or, more often, making it worse than it was before...).
Logged

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: How to efficiently ruin an accordion
« Reply #28 on: August 21, 2013, 06:59:50 PM »

You keep referring to "professional tuners" and "proper training".  All of the accordion tuners I know of are self taught.  What is "proper training"?  I think the idea that dremel use is a reliable indicator of ignorance is simply wrong.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: How to efficiently ruin an accordion
« Reply #29 on: August 21, 2013, 07:15:45 PM »

You keep referring to "professional tuners" and "proper training".  All of the accordion tuners I know of are self taught.  What is "proper training"?  I think the idea that dremel use is a reliable indicator of ignorance is simply wrong.

True, but all of the accordion tuners (including myself) whose work I know and respect prefer the file and scratcher.
Whereas the bad ones, whose work often adorns my tuning table, all seem to use a Dremel.

Just sayin' ..............
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How to efficiently ruin an accordion
« Reply #30 on: August 21, 2013, 07:45:30 PM »

Same here.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: How to efficiently ruin an accordion
« Reply #31 on: August 21, 2013, 08:14:06 PM »

Even I don't Dremel!    (:)

Mike Hirst

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1433
  • Black Dot B/C, Bastardo C#/D, Corona II GCF
Re: How to efficiently ruin an accordion
« Reply #32 on: August 21, 2013, 08:14:37 PM »

I use a file and a still manage to f*** it up  :(
Logged
Semper idem, sed non eodem modo

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Re: How to efficiently ruin an accordion
« Reply #33 on: August 21, 2013, 08:19:28 PM »

I use a file and a still manage to f*** it up  :(

I recently started "practicing" tuning reeds with a few chansons I had laying around the house.

I'm in the same boat. I don't need a fancy dremel to mess up some reeds, I do a fine job with just a file.
Logged
Sean McGinnis
Bordentown City, NJ, USA

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: How to efficiently ruin an accordion
« Reply #34 on: August 21, 2013, 08:21:44 PM »

Even I have started out the right way with a set of Files . checkout the File thread  for suggestions of best buys

http://forum.melodeon.net/index.php/topic,12909.0.html
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: How to efficiently ruin an accordion
« Reply #35 on: August 22, 2013, 02:48:45 PM »

I am not sure how accordions are tuned in Mexico. The guy in your video is Mexican. In Colombia we have "Técnicos Afinadores" to do this kind of job. It is very common to change the tune of your accordion for professional accordionists in Colombia (acordeoneros). They change the tunes to add more color or variety to their songs. In Colombia we have thousands of songs played with the accordion. This causes that after a while, many songs started to sound very similar, then they change the tune to make them sound different. The most common accordion used in Colombia is the Hohner Corona III which is a three row diatonic accordion. The stores sell them in the basic tones GCF, ADG, and BEbAb. Each letter meaning the tune one each row. It is very common to convert a GCF to a CFBb, a ADG to a DGC, a BEbAb to a BEA, etc. Basically you can changed it to any combination as long as you keep the harmony of (I, IV, V). Middle row = I, outside row = V and inside rom = IV. The link below is part of a Colombian documentary with subtitles in English where they show how the tune of the accordion is changed. The technician in the video lives in a very small town in Colombia near a desert but Colombia is mostly green, so please do not think that all the Country is like this  ;). You can watch the full documentary in youtube. Let me know what you think.
Video title: Acordeón del Diablo (Francisco el Hombre - Pacho Rada) Part 6
Link:
http://www.youtube.com/watch?v=4y3pQINzKY0

Hey thanks for that. I love the accordion duet...

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: How to efficiently ruin an accordion
« Reply #36 on: August 22, 2013, 06:00:55 PM »

You keep referring to "professional tuners" and "proper training".  All of the accordion tuners I know of are self taught.  What is "proper training"?  I think the idea that dremel use is a reliable indicator of ignorance is simply wrong.

True, but all of the accordion tuners (including myself) whose work I know and respect prefer the file and scratcher.
Whereas the bad ones, whose work often adorns my tuning table, all seem to use a Dremel.

Just sayin' ..............

It's not the tool that's the problem, it's the tool holding it...

(and they can either mess things up faster with a Dremel, or more slowly with a file or scratcher)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: How to efficiently ruin an accordion
« Reply #37 on: August 24, 2013, 06:03:43 PM »



I wonder how many on this forum who are making fun of this guy have actually tried to get proficient using a dremel or are just speculating.  Just to be clear, my preference for tuning is sandpaper glued to flat wooden sticks and a scratcher made from a needle file.  But I have used a dremel and found it very precise and easy to control and, even as a rank beginner, I never ruined a reed with it.  The reason I tried it in the first place was because I already had a dremel and Marc Savoy uses one on a video I saw.  He builds some of the most sought after cajun accordions in the US and has tuned hundreds of accordions.  In that respect I think he likely has as much "proper training" as anyone on this forum.   In the spirit of sharing useful information there is, in my opinion, one task where a dremel is superior to files and sandpaper and that is raising the pitch of a large reed by a semi tone or a whole tone.  You can make a nice little dimple in the tip of the reed with a dremel and never touch the perimeter of the reed.  This neatly raises the pitch without any effect on reed response or harmonics.  It also leaves a very nice spot for a bit of solder if you wish to reverse the process.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How to efficiently ruin an accordion
« Reply #38 on: August 25, 2013, 10:37:49 AM »

I've tried using a dremel type tool, and I can make it work without damaging the reed, but I find it needs more effort to keep it under control than do hand tools and it takes longer to use.  It is much heavier to pick up, and you have to wait while the tool spins up before you can apply it, and you have to wait for it to spin down after use.   With file or scratcher I can keep the tool in my hand all the time, no picking up and no waiting.  If you are only tuning the occasional reed this would not be significant, but  for example there is getting on for 200 tongues in a 2 row, 3 voice, 12 bass and when doing a full re-tune the difference becomes highly significant in terms of time and effort.  There is also the horrible buzzing noise.  When I'm tuning I need as near as possible complete silence, even noises in between sounding reeds are a distraction.

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: How to efficiently ruin an accordion
« Reply #39 on: August 25, 2013, 11:06:02 AM »

I've tried using a dremel type tool, and I can make it work without damaging the reed, but I find it needs more effort to keep it under control than do hand tools and it takes longer to use.  It is much heavier to pick up, and you have to wait while the tool spins up before you can apply it, and you have to wait for it to spin down after use.   With file or scratcher I can keep the tool in my hand all the time, no picking up and no waiting.  If you are only tuning the occasional reed this would not be significant, but  for example there is getting on for 200 tongues in a 2 row, 3 voice, 12 bass and when doing a full re-tune the difference becomes highly significant in terms of time and effort.  There is also the horrible buzzing noise.  When I'm tuning I need as near as possible complete silence, even noises in between sounding reeds are a distraction.

Exactly.  (:)
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com
Pages: 1 [2] 3 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal