Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Waxing with hot air gun  (Read 4831 times)

0 Members and 1 Guest are viewing this topic.

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Waxing with hot air gun
« on: August 17, 2013, 02:17:30 AM »

Can you wax reeds in by placing strips of wax alongside the reeds and playing a heat gun over the wax to melt it ?
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

old geezer

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 241
  • Hohner Melodeon
Re: Waxing with hot air gun
« Reply #1 on: August 17, 2013, 03:11:56 AM »

I doubt if the vinyl / vileda valves would survive the heat

help operator, give me the number for 911 ....
Logged
Jack Murphy    beyond the black stump

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Waxing with hot air gun
« Reply #2 on: August 17, 2013, 03:30:46 AM »

Placing a bad heat conductor over the reed blocks would go some way to stop the heat getting to the valves and directional nozzles on the heat gun would also help?
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Waxing with hot air gun
« Reply #3 on: August 17, 2013, 03:51:01 AM »

There's too many better ways to do it.  I melt it in a jar in hot water and use an eyedropper to pour it between the reeds.

old geezer

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 241
  • Hohner Melodeon
Re: Waxing with hot air gun
« Reply #4 on: August 17, 2013, 03:53:06 AM »

wouldn't the passing hot-air also tend to blow the melting wax along / away from the reed plates
why not use the tools the makers and repairers have used for years ?
Logged
Jack Murphy    beyond the black stump

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Waxing with hot air gun
« Reply #5 on: August 17, 2013, 07:14:53 AM »

Placing a bad heat conductor over the reed blocks would go some way to stop the heat getting to the valves and directional nozzles on the heat gun would also help?

it`d stop it getting to the wax too . Inventive, but you`re complicating things too much here  ::) .

Also I know if I tried the eyedropper method, the dropper would clog up and get messy (and it`d take me hours) , I`ll stick to the amateur method of temp controlled soldering iron and wax sticks - the Pros can mess with burners, wax pots, spoons and spatulas
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Waxing with hot air gun
« Reply #6 on: August 17, 2013, 08:07:22 AM »

I am a complete amateur in this, but when I have turned plates … I cut lttle strips of wax with scalpel (bugger, son's nicked that) Stanley knife, and quickly run past them with my soldering iron (double bugger!) a heated skewer.

Seems to work. In extremis (when son aged 3 kicked melodeon off shoulder) I once used penknife, tent peg and primus stove for the necessary repair.

Though it might have been easier to stop at 2 daughters ;)
Logged
  _       _    _      _ 

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Waxing with hot air gun
« Reply #7 on: August 17, 2013, 08:17:03 AM »

I am a complete amateur in this, but when I have turned plates … I cut lttle strips of wax with  Stanley knife, and quickly run past them with my heated skewer.
Seems to work. In extremis (when son aged 3 kicked melodeon off shoulder) I once used penknife, tent peg and primus stove for the necessary repair.

You really have been hanging around with Pikey too long haven`t you - LOL  ;D .. at least you`ve not resorted to carpet tape and matchsticks  :o
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Waxing with hot air gun
« Reply #8 on: August 17, 2013, 08:18:42 AM »

Although not an expert on reeds, I am however an expert on glue. Although this applies to books the principle is the same.
Stick (pun) with the traditional methods. I'm not a Luddite but a hundred years of trying the best method of waxing to my mind has been perfected. It's a bit like the Angle Poise lamp invented in the 1920's and never been bettered.  (:)
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Waxing with hot air gun
« Reply #9 on: August 17, 2013, 10:30:05 AM »

I am a complete amateur in this, but when I have turned plates … I cut lttle strips of wax with scalpel (bugger, son's nicked that) Stanley knife, and quickly run past them with my soldering iron (double bugger!) a heated skewer.

Seems to work. In extremis (when son aged 3 kicked melodeon off shoulder) I once used penknife, tent peg and primus stove for the necessary repair.

Though it might have been easier to stop at 2 daughters ;)

Is there a Boy Scout badge for Mobile Melodeon Maintenance? If so, you certainly qualify.
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Waxing with hot air gun
« Reply #10 on: August 17, 2013, 10:39:46 AM »

I am a complete amateur in this, but when I have turned plates … I cut lttle strips of wax with scalpel (bugger, son's nicked that) Stanley knife, and quickly run past them with my soldering iron (double bugger!) a heated skewer.

Seems to work. In extremis (when son aged 3 kicked melodeon off shoulder) I once used penknife, tent peg and primus stove for the necessary repair.

Though it might have been easier to stop at 2 daughters ;)

Never heard of a "two daughter stop"  does that remove the third?
Or indeed add one or two?


« Last Edit: August 17, 2013, 10:41:39 AM by Nick Collis Bird »
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Waxing with hot air gun
« Reply #11 on: August 17, 2013, 10:53:38 AM »

I don't think you can narrow the 'flame' enough. Plus you don't actually need much heat, there's a big risk you'll melt the wax too much, and even set it alight !

Use Charlie marshalls method, it's easy and it works,
Get an artists brush, flat head about 6mm wide, melt the wax in a pan ( I use an old milk pan ), place the reed on the wood, dip the brush in the wax, and flow it into the corner between the reed and the wood. Do the rest of the reed in the same way, then go round and do it again.

I think Charlie's get a video on YouTube somewhere, just search for Reed Waxing.

Alternatively, if its only one reed that needs putting back in, I've used a flat screwdriver blade, heated over a gas ring (gently heated, not until it goes blue!), then gently pressed the wax in place.
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Waxing with hot air gun
« Reply #12 on: August 17, 2013, 11:09:14 AM »

Alternatively, if its only one reed that needs putting back in, I've used a flat screwdriver blade, heated over a gas ring (gently heated, not until it goes blue!), then gently pressed the wax in place.

So convergence of technique there, though (honest) I only met Pikey at Bob's Swaledale tunes weekend last year! I take it a bit hotter, and actually melt in the wax. Sounds fiddly, but you have very good control of things and very little kit is needed.

Perhaps as well as my toolkit is now empty :-\  Just discovered all my suitcases are missing too  :o
Logged
  _       _    _      _ 

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Waxing with hot air gun
« Reply #13 on: August 17, 2013, 01:12:24 PM »

scalpel (bugger, son's nicked that)  soldering iron (double bugger!) 

I know that tune very well......  (:)
Logged

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Waxing with hot air gun
« Reply #14 on: August 17, 2013, 02:27:53 PM »

I confess to using the wax that cheeses get wrapped in for emergency repairs.  ;)
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Waxing with hot air gun
« Reply #15 on: August 17, 2013, 02:59:45 PM »


Also I know if I tried the eyedropper method, the dropper would clog up and get messy (and it`d take me hours) , 

There's definitely a couple tricks to keeping it from clogging, I like the fact you have pinpoint control.  We all have our comfort spots.

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Waxing with hot air gun
« Reply #16 on: August 17, 2013, 03:17:32 PM »

why not use the tools the makers and repairers have used for years ?

Because then nothing would ever progress? Then again, I have to agree with people's analysis here on this particular idea!

There are so many different ways of doing this particular job. I think that for standard boxes, the encaustic stylus has much to recommend itself, especially for quick and dirty jobs. But there are so many different options. Olav seems to get fantastic results with his folded brass spoon.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Waxing with hot air gun
« Reply #17 on: August 17, 2013, 03:29:55 PM »

Now about this acetylene torch idea I've been toying with......... >:E ;D
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Waxing with hot air gun
« Reply #18 on: August 17, 2013, 03:42:14 PM »

I confess to using the wax that cheeses get wrapped in for emergency repairs.  ;)

Yeah - BabyBel-Tuna .....  ;D
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Waxing with hot air gun
« Reply #19 on: August 17, 2013, 03:42:53 PM »

why not use the tools the makers and repairers have used for years ?

Because then nothing would ever progress? Then again, I have to agree with people's analysis here on this particular idea!

There are so many different ways of doing this particular job. I think that for standard boxes, the encaustic stylus has much to recommend itself, especially for quick and dirty jobs. But there are so many different options. Olav seems to get fantastic results with his folded brass spoon.

I agree to a certain extent, but if the wax hasn't changed why should the method.
Now for the Thermic Lance.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal