Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Why is the first octave incomplete?  (Read 1353 times)

0 Members and 1 Guest are viewing this topic.

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Why is the first octave incomplete?
« on: August 23, 2013, 12:53:56 AM »

Title says it all.  Not true on expanded instruments of course but your bread and butter type have that A/C# etc button in the key of D going on.  Wouldn't B/C# be a titch more logical?  But you have that combo on every box.  I read somewhere or was told that this was up to the accordion makers emulating the harmonica - or vice versa? - the incomplete scale on the mouthorgan is there so you can vamp a couple of chords while playing melody up top - which of course is pretty useless for us with our bass buttons and all.

And makers persist in building it this way since they've always made accordions this way.  Tradition, ala Fiddler on the Roof.   ;D  So is that the only reason for the gapped scale on the bottom?   Tried to find more info here and at 'tina.net but nothing came up. 
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Why is the first octave incomplete?
« Reply #1 on: August 23, 2013, 01:20:05 PM »

Hi Kevin,

It's a little hard to answer this question explicitly because there are so many variations of a "diatonic" layout. 

But omitting the variations with accidentals, and leaving aside the duplicate 5th note of the scale (sol, for example, G note in the key of C) that is sometimes present on button #1 draw and also #2 press of a 10-button box, and leaving aside the gleichton in some systems, there's a simple answer:

When a row of buttons has only the notes of a diatonic major scale, and different notes on each button for press and draw, *and (as often but not always the case) when the 3 notes of the major triad are on the press and the other notes are on the draw,*

that makes 3 notes on the press (e.g. C, E, G for the key of C)
and leaves 4 notes on the draw (e.g. D, F, A, B for the key of C).

In the middle of the range, 4 buttons are enough to play a full octave with no gaps.  But if you extend that "rule" lower or higher, the press notes extend their range of pitch faster than the draw notes, for example this layout for the C row of a 23 button C/C# box (press/draw):

C/F  E/A   G/B   C/D  E/F   G/A   C/B   E/D   G/F  C/A   E/B   G/D

Note the press notes run:  C, E, G, C, E, G, C, E, G, C, E, G
And the draw notes run:    F, A, B, D, F, A, B, D, F, A, B, D

Both the lowest pitched and the highest pitched notes on that row will be on the press.

PG

« Last Edit: August 23, 2013, 02:01:51 PM by pgroff »
Logged

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Why is the first octave incomplete?
« Reply #2 on: August 23, 2013, 05:32:11 PM »

Oh, that makes sense.  Thanks for the detailed reply, Paul.  I'm always thinking in terms of the melodic but you have all those musical traditions where harmony is just as important. 
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal