Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Leaky Bellows  (Read 5687 times)

0 Members and 1 Guest are viewing this topic.

JJRobson

  • Member
  • *
  • Offline Offline
  • Posts: 32
  • Scarlatti D/G
    • Threepenny bit
Leaky Bellows
« on: August 26, 2013, 09:16:16 PM »

Evening all.

I'm learning melodeon on a Scarlatti DG and I've noticed that the bellows are leaking a fair bit which, as I'm progressing, is starting to get annoying! I've tried to find the exact spot that the air is escaping but so far I've had no luck. Could anyone offer any advice on how to pinpoint and fix an air leak? Or failing that, someone in the oxfordshire area who does box repairs?

Cheers!
Logged
I don't play box with this lot... yet www.threepennybit.com

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Leaky Bellows
« Reply #1 on: August 26, 2013, 09:30:41 PM »

The chances are the leak, if it is a bellows leak, is from the gasket area where the bellows meet the casework. My usual method is to use an eyeball as a leak detector as it is very sensitive to air being blown on to its surface. Depending on where the leak is it may be matter of replacing bellows gasket or something more drastic if the leak is actually in the bellows. Alternatively the leak could elsewhere and difficult to diagnose by remote control.

If you have no success I can be found near Aylesbury in Bucks www.lesterbailey.org

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Leaky Bellows
« Reply #2 on: August 26, 2013, 10:48:55 PM »

What is your usual method for removing debris from the eyeball ;)
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Leaky Bellows
« Reply #3 on: August 27, 2013, 07:05:50 AM »

LOL B - Hence why using the lips and are safer as leak detectors
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Leaky Bellows
« Reply #4 on: August 27, 2013, 10:17:17 AM »

And if eyeballs and lips don't work, another option.....

Maybe only works with concertinas though....
« Last Edit: August 27, 2013, 10:21:37 AM by Malcolm Clapp »
Logged
Tuner/repairer, now retired.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Leaky Bellows
« Reply #5 on: August 27, 2013, 10:42:59 AM »

Getting back on topic...

Air leaks don't always mean a faulty bellows. Badly fitted pallets are the next place to suspect. Pallets that don't lie flat, or don't fully cover the air holes. Tiny cracks in glued joints, or missing screws are another possibility.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Leaky Bellows
« Reply #6 on: August 27, 2013, 01:06:04 PM »

Getting back on topic...

Air leaks don't always mean a faulty bellows. Badly fitted pallets are the next place to suspect. Pallets that don't lie flat, or don't fully cover the air holes. Tiny cracks in glued joints, or missing screws are another possibility.

I'd try a new gasket first, thats usually been the main source of my leaks.

If that doesnt work, sit in a quiet room, and push and pull the bellows together hard without playing any notes in pulses - you might be able to hear any escaping wind from any pallets.

To check for holes in bellows, take them off, and look from inside up to a bright light - you should be able to see any holes. If there are any, patch them from the inside with small bits of thin leather (or similar) and PVA glue, or if desperate use small strips of woven fabric tape (carpet tape is good).

Look inside the ends - are any of the strap screws protruding through the wood into the casing? a dab of PVA glue usually sorts that out.

Pikey
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Leaky Bellows
« Reply #7 on: August 27, 2013, 04:30:25 PM »

And if eyeballs and lips don't work, another option.....

Maybe only works with concertinas though....

And I thought that I was the only one who used that method.  ;D
Back to topic.
THE SMOKE TEST.
This is used in the gas industry to test for leaks also for woodwind, electronics software etc.
It comes as a form of aerosol and is passive, eg that it won't gum up or rot anything.
  I've never used this method, but the idea is to remove one end, puff in the smoke, slap the end back on and gently squeeze and watch all those wonderful leaks.
It may be possible to inject the smoke through the air button, but as I've said I've never tried this.
Now where's that haystack and 'Tina  >:E
 
« Last Edit: August 27, 2013, 07:15:09 PM by Nick Collis Bird »
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Leaky Bellows
« Reply #8 on: August 27, 2013, 07:03:32 PM »

thanks for that Nick  ::) presumably you have tried out the water bath method?  :P
Logged
  _       _    _      _ 

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Leaky Bellows
« Reply #9 on: August 27, 2013, 07:13:34 PM »

thanks for that Nick  ::) presumably you have tried out the water bath method?  :P

Only in the river Sid , and it didn't work.  ;)
On a serious  note, I don't see why the smoke idea shouldn't work, it's easily available from gas fitter suppliers or on line.
It's certainly used in woodwind manufacture for leak detection.
« Last Edit: August 28, 2013, 05:57:32 AM by Nick Collis Bird »
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Leaky Bellows
« Reply #10 on: August 28, 2013, 09:43:23 AM »


On a serious  note, I don't see why the smoke idea shouldn't work, it's easily available from gas fitter suppliers or on line.
It's certainly used in woodwind manufacture for leak detection.

Interesting idea leading to a couple of questions:
Does the smoke persist inside for long enough to get all the bellows pins in, or would it need to be injected through a suitable aperture eg the last bellows pin hole?
Do you need a particularly good light to see the escaping smoke?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Leaky Bellows
« Reply #11 on: August 28, 2013, 02:19:42 PM »

In a word or three I don't know. But I imagine taking the end plate off exposing the air valve pallet and sucking it in from there.
  It must be easily visible as gas fitters use it for leak detection. I'm not sure about a light, maybe a box of matches, a candle?  >:E
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Leaky Bellows
« Reply #12 on: August 28, 2013, 02:39:34 PM »

On a serious  note, I don't see why the smoke idea shouldn't work, it's easily available from gas fitter suppliers or on line.
It's certainly used in woodwind manufacture for leak detection.

Is there any chance of corrosive effects on metal reeds?  The firefighter in me suspects any smoke of having particulates, most of which I'd be nervous about having on metal reeds.  Though, even if it was, maybe the small amount used would not make a difference.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Leaky Bellows
« Reply #13 on: August 28, 2013, 03:06:16 PM »

The smoke sources I was able to find on a quick search of plumbers suppliers are all based on burning something, either a special smoke match or a smoke pellet which is burned in a special spoon.  All very well with copper pipes, but they are not getting anywhere my workshop thank you very much. :o  To much inflammable stuff around.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Leaky Bellows
« Reply #14 on: August 28, 2013, 03:33:13 PM »

I thought it was completely passive, and can come in aerosol format. If it was "nasty" it wouldn't be used for Clarinets bassoons etc.  :-\
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Leaky Bellows
« Reply #15 on: August 28, 2013, 04:32:40 PM »

Smoke matches and pellets are used to test flue draught, not to find leaks.
The aerosol gas leak detection products are generally (fairy?) liquid.
I've seen cans of Irish fresh air for sale as souvenirs but not smoke in a tin, does it come with a genie?
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Leaky Bellows
« Reply #16 on: August 28, 2013, 04:52:02 PM »

Ok I give up on this one. I have just read on Wiki.... Thingy that cigarette smoke was used in the 30's.
  I could have sworn that I've seen something (aerosol type, like WD40) that creates passive  smoke,
I can't see any reference to it now. Maybe it's an age thing. 'Twas just a thought.   ???
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Leaky Bellows
« Reply #17 on: August 28, 2013, 04:53:50 PM »

Ok I give up on this one. I have just read on Wiki.... Thingy that cigarette smoke was used in the 30's.
  I could have sworn that I've seen something (aerosol type, like WD40) that creates passive  smoke,
I can't see any reference to it now. Maybe it's an age thing. 'Twas just a thought.   ???

Try harder   ;)

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Leaky Bellows
« Reply #18 on: August 28, 2013, 05:26:48 PM »

Wot blowing smoke?
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: Leaky Bellows
« Reply #19 on: August 28, 2013, 05:33:54 PM »

Getting back on topic...

Air leaks don't always mean a faulty bellows. Badly fitted pallets are the next place to suspect. Pallets that don't lie flat, or don't fully cover the air holes. Tiny cracks in glued joints, or missing screws are another possibility.

I'd try a new gasket first, thats usually been the main source of my leaks.

If that doesnt work, sit in a quiet room, and push and pull the bellows together hard without playing any notes in pulses - you might be able to hear any escaping wind from any pallets.

To check for holes in bellows, take them off, and look from inside up to a bright light - you should be able to see any holes. If there are any, patch them from the inside with small bits of thin leather (or similar) and PVA glue, or if desperate use small strips of woven fabric tape (carpet tape is good).

Look inside the ends - are any of the strap screws protruding through the wood into the casing? a dab of PVA glue usually sorts that out.

Pikey

I'd agree with changing the gasket. Dirt cheap and it won't do any harm and is likely to solve the problem. If it doesn't then more expensive procedures might be contemplated.
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal