Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Timber Keybaord  (Read 2984 times)

0 Members and 1 Guest are viewing this topic.

boxlad

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 291
    • Ray Ó Díomasaigh
Timber Keybaord
« on: January 28, 2009, 10:54:07 AM »

Anyon know where I might get a timber keyboard for an old one row hohner I am repairing. The one it has is destroyed and it needs to be replaced..  :-[
Thanks
Logged

Malcolm Austen

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 495
  • any old hohner
Re: Timber Keybaord
« Reply #1 on: January 28, 2009, 12:11:10 PM »

unless Theo or Rees jumps in with one soon you could try Pete Grassby
here he often has old hohner parts.
Logged
aka malodeon

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Timber Keybaord
« Reply #2 on: January 28, 2009, 12:20:57 PM »

I can supply you with a plastic fingerboard, not a wood one I'm sorry to say.  They are quite fragile, and tend to split between the button holes.  It is often possible to graft in a new piece of wood and re-cut the holes.  They are worth saving because they are a bit less noisy than the plastic ones.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Timber Keybaord
« Reply #3 on: January 28, 2009, 12:30:20 PM »

This looks interesting and appears to cover the key travel problem as well.

About halfway down on the right

TomB-R

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 598
Re: Timber Keybaord
« Reply #4 on: January 28, 2009, 01:59:27 PM »

Build from scratch? I did one not long ago for a Double-Ray I bought on Ebay. The "keyboard" was missing and the keys and buttons were sticking up like a row of daisies!

Even with very basic tools no big issue to fabricate from light timber and ply.  A forstner bit would be nice for cutting the "button-holes."
Logged

Malcolm Austen

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 495
  • any old hohner
Re: Timber Keybaord
« Reply #5 on: January 28, 2009, 03:15:44 PM »

Build from scratch? I did one not long ago for a Double-Ray I bought on Ebay. The "keyboard" was missing and the keys and buttons were sticking up like a row of daisies!

Even with very basic tools no big issue to fabricate from light timber and ply.  A forstner bit would be nice for cutting the "button-holes."

any chance of a photo it would be interesting to see the end result
Logged
aka malodeon

finnhorse

  • Guest
Re: Timber Keybaord
« Reply #6 on: January 28, 2009, 04:14:05 PM »

This looks interesting and appears to cover the key travel problem as well.

About halfway down on the right

I saw that on his site a while back but I couldn't figure why it said 'professional installation recommended'  ???
Logged

EeeJay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 642
  • Old Grey Paolo
Re: Timber Keybaord
« Reply #7 on: January 28, 2009, 04:35:26 PM »

This looks interesting and appears to cover the key travel problem as well.

About halfway down on the right

I saw that on his site a while back but I couldn't figure why it said 'professional installation recommended'  ???

From what I gather - and after e-mailing Michael Usui about these - it's down to the sound projection. Once you begin to minimise the key travel, it reduces the lift of the palettes, and can muffle the sound a fair bit. There are ways to alleviate this, by enlarging/reshaping/reprofiling the holes in the soundboard. And this is what you get as part of the professional installation.

However, Michael's happy enough to supply the keyboards seperately. So long as you understand that one solution can cause another problem...

Ed J
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal