Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: New reeds for old Hohner  (Read 1613 times)

0 Members and 1 Guest are viewing this topic.

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
New reeds for old Hohner
« on: September 05, 2013, 08:38:24 PM »

I've been toying with the idea of converting my old B/C/C# Trichord to C/C#/D.  It's 31/12, MM.  Dunno about the vintage, bare metal bellows pins with no washers on the outside (yanking those free for the first time in decades was quite a chore, lots of rust), wood keyboard with plastic cover, white plastic buttons with the tonic notes in the middle black and cross-hatched, thumb strap.

The reeds themselves are shiny metal with "T" stamped into the top, mylar valves, and I think leather with mylar cover on the lowest notes?  At least on the bass, which is simple Stradella btw.  Where would I get a set for the D row, should I contact Button Box or Michael Usui or someone?  I can install the little buggers my ownself, also.  Shouldn't be a problem moving reeds from one row to another, was measuring things with the calipers and they look fairly interchangeable.

Should I cannabilize another D box?  I've an older D/A Hohner but it isn't a 4th note start and those reeds are grey metal with leather valves and "O" stamps.  Maybe I could fill in the low notes with reeds from the B row, retune 'em a bit?  Do you find many old D Hohners with 4th note start?
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: New reeds for old Hohner
« Reply #1 on: September 05, 2013, 08:54:20 PM »

I'd go with retuning the B row reeds. If you move everything up one space the resulting pattern is close to a D scale, so the reeds will only need to be tuned up or down a semitone. I've done this a few times with no problems.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: New reeds for old Hohner
« Reply #2 on: September 05, 2013, 10:12:10 PM »

That had occurred to me too, would need some practice as I've done cleaning/revalving/waxing but haven't retuned anything yet.  Have to find a sacrificial box first... >:E  Have a junker PA with most of its reeds loose, that would do for test purposes. 

Looking at the Trichord layout you do have B/G# where you would have to tune down a full tone to get it to A/G, but the rest is semis like you say.  But I'd still rather just install new or new/old D reeds if I can, don't want to mess up the B row in case I want to sell it down the line to a B/C/C# fan, you know.  Don't want to bugger up the works attempting to tune things, either! 
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: New reeds for old Hohner
« Reply #3 on: September 05, 2013, 10:42:02 PM »

If you have an old PA to donate reeds you could use those for the reeds that are too far away in the B set.  So for the G/A reed select a G# and tune one side up and one side down.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: New reeds for old Hohner
« Reply #4 on: September 05, 2013, 11:11:59 PM »

Hey, you could do that, couldn't you?   (:)  Pardon the pun, I need to think outside of the box more...thanks for the advice, fellows. 
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: New reeds for old Hohner
« Reply #5 on: September 06, 2013, 03:08:55 PM »

Hi Kevin,

If you can't locate a set of D row reeds, email me good pics of your reeds and I will try to find you a set for a D row from a Hohner set that matches your C and C# reeds.  I bet I have some here that will do the job; at most you would have to retune reeds to get the lowest notes (assume you want D/G and F#/B for those, for which I could probably find you D/F# and G/B to retune slightly).  I would agree with you that it makes sense pull the B reeds and save them in case you want to go back to the stock B/C/C# layout.

PG
Logged

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: New reeds for old Hohner
« Reply #6 on: September 07, 2013, 01:44:42 AM »

Paul - that'd be great, to say the least.  Will take some pics and send 'em along here, some measurements too.  Was shopping around and it's hard to find much on eBay, there's a guy with about 3000 Weltmeister reeds for sale... :o  I'll throw in some rare accordion audio while I'm at it - did you ever get a copy of the Frank Quinn CD?

Am working on a proper tuning table as well, I've my uncle's old PA bass end set up on its own but need to get one of these treadle arrangements going, there's some very nice pics people have helpfully provided here.  Also this video of the Weltmeister Accordion Factory made by Kimric Smythe shows their tuning table setups, which leave nothing to be desired from the looks of things. 
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal