Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Reed Problem  (Read 2006 times)

0 Members and 1 Guest are viewing this topic.

Mutt

  • Melodiate
  • Good talker
  • **
  • Offline Offline
  • Posts: 98
  • D/G Saltarelle Infeno, D/G Club IIb, A/D Pokerwork
Reed Problem
« on: September 05, 2013, 10:25:42 PM »

I've just gotten my Club IIB back from repair and tuning.  The tuner did a wonderful job, replacing a fistfull of valves, getting more than I thought was there out of the bass (a high reed in the G bass -- who knew?), and giving it a nice swing tuning.  There were also a number of reeds that wouldn't start together and he fixed those, too.  All except one.

The draw B in the middle of the D row has one reed that just won't start.  I have to give the bellows a good yank, and then it plays (although a bit delayed after it's mate), but only if I keep sounding it.  When I come back to the note later in the tune the reed is as quiet as ever. I could return it to the shop, but shipping will cost me an arm and a leg (I'm a long way from anywhere, melodeon-wise); this last shipping round trip nearly cost as much as the tuning and repair.  I know the tuner would make it good if I could get it to him, but I can't afford to ship it, right now.

So I'm left to sorting things out myself.  I can get the box apart, can get the reed bank out, can identify which holes correspond to the A/B button, but from there on in, I'm not sure what I'm doing.  I think one of the reeds comes a little high out of the slot, but there are other reeds around with the same set, so maybe I'm looking at the wrong one. Or maybe my problem is somewhere else, entirely.

Any ideas and suggestions?  I've messed with the innards of concertinas, before, but never melodeons.

Thanks.
Logged
George Knight
Anchorage, Alaska
Yes, brrrrrrr!

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Reed Problem
« Reply #1 on: September 05, 2013, 11:54:49 PM »

The draw B in the middle of the D row has one reed that just won't start.  I have to give the bellows a good yank, and then it plays

That's quite likely to be a valve that's sticking shut. I'd guess that carefully cleaning the reed plate around the slot and the valve where they make contact would make it less sticky.

Alternatively it needs a replacement valve made of thinner material. Theo fixed a weak bass reed on my G/C Dino by simply replacing the valve; the original was made of leather that was just too thick and stiff to lift easily off the hole under reasonable air pressure.

But if it starts suddenly when you yank the bellows hard enough, and is then as loud as if should be, the valve is more likely to be sticky than stiff.

Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed Problem
« Reply #2 on: September 06, 2013, 07:52:09 AM »

Agreed, it could be a valve problem, but it could also be that a B reed has the gap set too wide.  The valves are easy to check because the valve for the draw reed is the one on the outside of the block.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Mutt

  • Melodiate
  • Good talker
  • **
  • Offline Offline
  • Posts: 98
  • D/G Saltarelle Infeno, D/G Club IIb, A/D Pokerwork
Re: Reed Problem
« Reply #3 on: September 06, 2013, 03:00:12 PM »

Thanks to you both.  I'll check the valves when I get home from work this evening.  What would I be cleaning with?  A damp cloth?  Something gritty?
Logged
George Knight
Anchorage, Alaska
Yes, brrrrrrr!

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Reed Problem
« Reply #4 on: September 06, 2013, 03:04:02 PM »

Hi George,

Are you still in Anchorage?  I'm surprised there is no one there who can sort out a single missing reed.  Does Marge Ford still have her shop / teaching studio?

Paul Groff
Miami these days
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed Problem
« Reply #5 on: September 06, 2013, 03:26:07 PM »

Cleaning valves needs to be done very carefully.  If they are leather and contaminated they should be replaced. If they are plastic just wipe the contaminated surfaces with a cotton wool bud dipped in alcohol, then allow to dry.  Replacement valves are very cheap and easily sent by post.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Mutt

  • Melodiate
  • Good talker
  • **
  • Offline Offline
  • Posts: 98
  • D/G Saltarelle Infeno, D/G Club IIb, A/D Pokerwork
Re: Reed Problem
« Reply #6 on: September 06, 2013, 03:47:28 PM »

Hi George,

Are you still in Anchorage?  I'm surprised there is no one there who can sort out a single missing reed.  Does Marge Ford still have her shop / teaching studio?

Paul Groff
Miami these days

Thanks, Paul!  It sounds odd, but I've never dealt with Marge, so I hadn't thought of her.  I'll see if I can find her contact info.

Sorry, Marge, if you read this . . .   :-[
Logged
George Knight
Anchorage, Alaska
Yes, brrrrrrr!
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal