Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Reed not sounding on Lilly, advice appreciated please  (Read 1288 times)

0 Members and 1 Guest are viewing this topic.

Helena Handcart

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2452
  • Saltarelle Nell
Reed not sounding on Lilly, advice appreciated please
« on: September 08, 2013, 08:28:25 PM »

Hi,

Having just got back from a fantastic weekend at Swanage FF I sat down to play a few tunes on my Lilly and found that one of the reeds is not sounding on the pull.  When I try to sound the note no sound is produced and very little air is drawn through the bellows, feeling as if the note is blocked somehow.

I've removed the bellows pins and had a quick look to see if I can find anything obvious like a stuck valve or anything that looks out of place. I'm not even sure what I should be looking for as I am not as intimately acquainted with the Lilly's gubbins as I am with the pokerwork (it's called that because you can poke about in the works, right?).

Can anyone offer any advice as to what the problem might be?  I'm hoping it is something I can fix myself (fingers crosse).

Thanks

Helena
Logged
Saltarelle Le RomanĂ©  | Saltarelle Nuage | Oakwood | various elderly Hohners

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Reed not sounding on Lilly, advice appreciated please
« Reply #1 on: September 08, 2013, 08:35:13 PM »

I expect the repairers of our acquaintance will be along in a moment with sound advice.  Meantime, I've had reeds go silent on occasion and it seems it's mostly dust getting into the gap and stopping it from moving.  It may be brutal, but I play the reed really hard and it usually blasts it clear.  I'm told that pinging the reed also has the desired effect.

Rob.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reed not sounding on Lilly, advice appreciated please
« Reply #2 on: September 08, 2013, 08:48:02 PM »

Probably something caught in between the plate and the reed tongue. Swanwage sand maybe  ;)

Like Rob said some brutal push, pull on the reed may well shift it. Otherwise identify the reed plate in question and, as it's the pull reed, gently lift the valve and poke a cocktail stick or similar through the plate to move the inside reed tongue and hopefully dislodge the muck.

Helena Handcart

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2452
  • Saltarelle Nell
Re: Reed not sounding on Lilly, advice appreciated please
« Reply #3 on: September 08, 2013, 08:56:43 PM »

Probably something caught in between the plate and the reed tongue. Swanwage sand maybe  ;)

 (:)  :|glug

Thank you Rob and Lester for your suggestestions, I'll give it a go.
Logged
Saltarelle Le RomanĂ©  | Saltarelle Nuage | Oakwood | various elderly Hohners

Helena Handcart

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2452
  • Saltarelle Nell
Re: Reed not sounding on Lilly, advice appreciated please
« Reply #4 on: September 08, 2013, 09:13:48 PM »

Lilly is sorted. The push/pull wouldn't shift it but poking about (gently, ish) around the reed has dislodged the whatever-it-was.

I also discovered that Lilly is 15 this month, something I'd quite forgotten.

Thanks again

Helena
Logged
Saltarelle Le RomanĂ©  | Saltarelle Nuage | Oakwood | various elderly Hohners

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reed not sounding on Lilly, advice appreciated please
« Reply #5 on: September 08, 2013, 09:22:59 PM »

 (:)
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal