Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: hohner two stop repair  (Read 2425 times)

0 Members and 1 Guest are viewing this topic.

davidd

  • Member
  • *
  • Offline Offline
  • Posts: 44
hohner two stop repair
« on: February 02, 2009, 03:43:57 AM »

Hello, I have just bought a Hohner single row with two stops.  It is in pretty good shape except for a missing valve or two.  Unfortunately they are from the reeds on the inside of the glued down reed blocks.
Are there any tricks to removing the blocks easily?  Or a neat way to replace the valve without removing the blocks? Thanks,
David
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: hohner two stop repair
« Reply #1 on: February 02, 2009, 08:37:20 AM »

If it is a two stop hohner one row there should,be only one reedblock.  If there are two blocks it suggests that you may have a 3 or 4 stop with missing stops!

Hohners shedding valves is very common in instruments from a period, probably in the 1950s and 60s when Hohner were experimenting with different adhesives.  If some have fallen off there is every chance that more will be shed at any time.

The reedblocks are glued in as you've noted.  I don't know of a satisfactory way to remove them without risking serious damage.  Even if they are glued with hide glue the warmth and water that would release the glue will cause severe distortion in the very thin components that make up the stop slides, and could also lead to the reedblock itself coming apart.

The reeds can be removed easily enough, and the old wax cleaned off.  Replacing the reeds with the blocks in place is possible but is a royal pita especially for the reeds in the gap between two blocks.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

davidd

  • Member
  • *
  • Offline Offline
  • Posts: 44
Re: hohner two stop repair
« Reply #2 on: February 02, 2009, 01:38:06 PM »

Thanks Theo, I guess I misspoke when I said it had two reed blocks, what I was referring to was the two outside reed sets. Definitely a two stop. 
I am a blacksmith by trade and am not the most delicately fingered guy around, so is taking the reed off and re-waxing it back after re-gluing the valve on a job for delicate fingers?
It plays well enough with just the one stop up, so maybe I will wait for more money to roll in to fix it up.
One more thing, any recommended repairers near Washington DC?
Thanks, David
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: hohner two stop repair
« Reply #3 on: February 02, 2009, 01:58:06 PM »

If its a two stop with just one reedblock then there is no need to remove the reedblock.   A couple of missing valves won't prevent you playing with both sets of reeds,  but thoe missing valves will mean that some reeds may not play as loud as they should.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal