Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Setting and tuning bass/chords on Hohner 1 row  (Read 2491 times)

0 Members and 1 Guest are viewing this topic.

Noodle

  • Louder is better, right?
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 219
  • Occasionally actually helpful
Setting and tuning bass/chords on Hohner 1 row
« on: September 29, 2013, 02:14:37 AM »

Hi all,

I've been working on a 114G recently, and it's looking to be the first project I'll have actually completed! I've done the usual de-rust/re-valve/re-wax thing, as well as a few other bits. All that's left to do is try and make the stop rod holes a little less leaky and firm up their action to avoid having to locate some "character giving" pegs to send it back with, and tuning, which is where I need some advice.

Bearing in mind I haven't yet constructed any tuning devices/rigs, what's the best way to set and tune the left hand reeds? A couple of chord reeds are slow to speak on the pull when given a little bit o' welly, and there sounds like there a bit of tuning to do.
Logged
Nottingham, UK.

Hohners: HA114 (C), HA114 (G)*, Liliput (C/F), Preciosa (C/F)*, 1040 (G), Imperial. Dino Baffetti Binci III (D/G), Self-made Pariselle 2.6 (G/C), Soberano (C/F), Nopka garmoshka (F#)*.

One day I'll get really good, like those really good players. One day.
*to be fixed

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Setting and tuning bass/chords on Hohner 1 row
« Reply #1 on: September 29, 2013, 08:29:48 AM »

I have a method for stopping stop droop using Neodymium magnets. Just going out now fro the annual morris bike ride but will write more later.

Noodle

  • Louder is better, right?
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 219
  • Occasionally actually helpful
Re: Setting and tuning bass/chords on Hohner 1 row
« Reply #2 on: October 02, 2013, 11:51:56 PM »

I do remember that discussion a while ago. Perhaps I'll use it on another box as it's fairly low down on my priority list. I think the main issue I need help with is tuning the left side of the box, with its communal reedblocks.
Logged
Nottingham, UK.

Hohners: HA114 (C), HA114 (G)*, Liliput (C/F), Preciosa (C/F)*, 1040 (G), Imperial. Dino Baffetti Binci III (D/G), Self-made Pariselle 2.6 (G/C), Soberano (C/F), Nopka garmoshka (F#)*.

One day I'll get really good, like those really good players. One day.
*to be fixed

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Setting and tuning bass/chords on Hohner 1 row
« Reply #3 on: October 03, 2013, 08:10:31 AM »

Tuning the left side of the box requires a method of isolating one reed in each chord or bass. 

I use one of two methods: 

The first I learned from Emmanuel Pariselle who uses small strips of stiff paper which are (a) slipped under the push reed, and (b) pushed down the gap between the pull reed and it's slot.  You stop the reeds leaving just one reed sounding per button in each direction.   Tune that pair of reeds, then repeat the process for each of the other reeds. 

Second method I learned from Bernard Loffet.  He uses masking tape to do the same job.  I would have thought that this would damage the valves, but if you use a low tack tape, and take care when removing it then there is no damage.
 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Setting and tuning bass/chords on Hohner 1 row
« Reply #4 on: October 03, 2013, 09:56:39 AM »

Tuning the left side of the box requires a method of isolating one reed in each chord or bass. 

I use one of two methods: 

The first I learned from Emmanuel Pariselle who uses small strips of stiff paper which are (a) slipped under the push reed, and (b) pushed down the gap between the pull reed and it's slot.  You stop the reeds leaving just one reed sounding per button in each direction.   Tune that pair of reeds, then repeat the process for each of the other reeds. 

Second method I learned from Bernard Loffet.  He uses masking tape to do the same job.  I would have thought that this would damage the valves, but if you use a low tack tape, and take care when removing it then there is no damage.
 
For isolating pull reeds, I have found the low-tack sticky strip of Post-it Notes works well. I use scissors to cut off a suitable length of the sticky bit and slip it under the valve and gently press it in place over the slot. The low-tack glue holds it in place but it can be removed easily and without leaving any residue. After a few uses, the stickiness goes, but then you just cut a strip from another Post-It.

You can also buy a Post-It strip on a roll, the sticky bit is the full width of the roll, usually about an inch, so wider than on an ordinary Post-It note. If you cut a strip of this length-wise with scissors, it's useful for blocking off an entire row of reeds on the underside of a reed block, e.g. to temporarily mute the tremolo reeds whilst tuning the at-pitch reeds. It stays in place but can be easily removed without damaging wood/felt (unlike masking tape).
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Setting and tuning bass/chords on Hohner 1 row
« Reply #5 on: October 03, 2013, 10:15:38 AM »

[It stays in place but can be easily removed without damaging wood/felt (unlike masking tape).

I though that masking tape would cause damage, but after seeing Bernard use it I was surprised to find it does the job well. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal