Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Building my own box  (Read 6399 times)

0 Members and 1 Guest are viewing this topic.

Noodle

  • Louder is better, right?
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 219
  • Occasionally actually helpful
Building my own box
« on: September 29, 2013, 03:54:51 AM »

I've decided it's one of my ambitions to build a box. "But didn't you just build one on a Pariselle course?" I hear you ask. Yes, yes I did, and I'm very proud and very happy with what I ended up with but I wish to be able to design and make, whenever feasible, my own creations. The ultimate goal is to be able to produce boxes that are good enough to sell, and the dream is for people to want to buy them.

I can recall a few threads from makers who frequent this wonderful forum with pictures, detailed progress descriptions and bits of advice, and I'll be sifting through the ones I can find if I'm short on inspiration.

I have a few limitations:
Budget. I've been slowly acquiring second hand tools and machinery, and basically none of it is particularly heavy duty. What I do have includes a small band saw, a drill press frame (Black and Decker type drill is attached) and various hand tools. Are there any essentials I may have forgotten? Will it be that much more difficult to do what I need to do with 'DIY' grade equipment or should I save myself unnecessary frustration by saving up for better stuff?

Note layouts confuse me. How important is it actually to be able to understand and explain the merits and downfalls of various systems and layouts? Do makers generally find people are happy with a layout that you would offer as standard or does there tend to be a good number who are curious about alternatives but are unfamiliar with them? Is this an area I should try to learn much more about?

I don't have an 'engineering' brain. Fortunately I do have people around me who can offer solutions to problems I'd struggle with.


Realistically, other than reeds, what parts should I rely on other people making for me?
I can imagine the keys and mechanism would be too tricky to make myself but I could give bellows making a go. I can only think of those parts that would be most problematic.

I understand that I will need endless patience, I'll end up with a large supply of firewood for the log burner, lots of tea and coffee to fuel the tears of frustration and money to see me through the initial steep learning curve. Other than that, what advice can makers and repairers offer me?


My initial plan is to design and build a 2 or 3 voice 2 row melodeon, ideally around the size or smaller than a Castagnari Lilly, the smaller the better. As I doubt I'd be capable of competing with the Loffet's, Van der Aa's or Castagnaris in terms of build quality, flexibility and demand, I'd be aiming for the lower end of the pricing spectrum. Would that be expecting the impossible, perhaps?
Logged
Nottingham, UK.

Hohners: HA114 (C), HA114 (G)*, Liliput (C/F), Preciosa (C/F)*, 1040 (G), Imperial. Dino Baffetti Binci III (D/G), Self-made Pariselle 2.6 (G/C), Soberano (C/F), Nopka garmoshka (F#)*.

One day I'll get really good, like those really good players. One day.
*to be fixed

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Building my own box
« Reply #1 on: September 29, 2013, 05:33:03 AM »

Personally I'd add a belt-sander. You can get a small (4") bench sander for about £100 new and you should be able t0 pick up a used one for half that or less. It takes a bit of practice, but with care takes out a lot of the donkey-work in sanding and can also be used for basic shaping and thicknessing jobs.

I should have said that I don't mean a hand-held belt sander, which apart from obvious difficulties securing the work, the machiine and your personal safety, will be too short and probably too fast-running to be of any use; I'm talking about a bench-mounted machine that usually incorporates a sanding disc and table as well, such as this one: http://www.axminster.co.uk/axminster-hobby-series-awebds46-mkii-belt-and-disc-sander-prod886575/

Graham
« Last Edit: September 29, 2013, 05:53:43 AM by GPS »
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Cag

  • Member
  • *
  • Offline Offline
  • Posts: 44
Re: Building my own box
« Reply #2 on: September 29, 2013, 08:00:54 AM »

Given so many parts are square sided I would have thought a small benchsaw a good idea.

Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Building my own box
« Reply #3 on: September 29, 2013, 08:31:22 AM »

Personally I'd add a belt-sander. You can get a small (4") bench sander for about £100 new and you should be able t0 pick up a used one for half that or less. It takes a bit of practice, but with care takes out a lot of the donkey-work in sanding and can also be used for basic shaping and thicknessing jobs.

I should have said that I don't mean a hand-held belt sander, which apart from obvious difficulties securing the work, the machiine and your personal safety, will be too short and probably too fast-running to be of any use; I'm talking about a bench-mounted machine that usually incorporates a sanding disc and table as well, such as this one: http://www.axminster.co.uk/axminster-hobby-series-awebds46-mkii-belt-and-disc-sander-prod886575/

Graham

+1  It is my most commonly used power tool.

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Building my own box
« Reply #4 on: September 29, 2013, 09:24:35 AM »

It's a very exciting idea ... one which I've had - and explored at the design stage - but lack of time and workshop space has got in the way of actually starting to realise it.  And you have the massive advantage of having been on Emmanuel's course.  Other members have made fully functional instruments with nothing more than hand tools in the past which is very inspiring.

Note layouts confuse me. How important is it actually to be able to understand and explain the merits and downfalls of various systems and layouts? Do makers generally find people are happy with a layout that you would offer as standard or does there tend to be a good number who are curious about alternatives but are unfamiliar with them? Is this an area I should try to learn much more about?

As far as layouts go - it kind of depends on who you're making it for.  If it's for you then it's the same process as choosing a layout if you were buying from somewhere else I suppose.  2 row layouts are fairly standard and many have found that Anahata's layout with the low G scale available very useful indeed for a D/G two-row.

Once you go to 2.5 rows and higher with accidentals and reversals on the inside row then it becomes very personal indeed - and generally what happens is that you learn the system you have - as when progressing from 2 to 2.5 rows you have very little idea how you'll actually play those extra notes.  Again many people have found the Jean-Michel Corgeron type layout a sensible layout on the right hand side as it allows most chords to be played on the right hand.

Realistically, other than reeds, what parts should I rely on other people making for me?  I can imagine the keys and mechanism would be too tricky to make myself but I could give bellows making a go. I can only think of those parts that would be most problematic.

The parts you mention can be bought in relatively easily from Italy - and in a pretty wide range of colours and styles.  But where boxes become individual and different tends to be where makers decide to make their own parts too.  The buttons on my Kay Albrecht box are absolutely stunning and home-made from mother of pearl/abalone set in brass tubing cut to button size and then shaped.  I would imagine that would be a fairly long-winded process, but with amazing results.  In contrast - I don't think I would make my own bellows because the ones you can buy are consistently good, and the bellows as a complicated functional part of the box are really important to the instrument.

My initial plan is to design and build a 2 or 3 voice 2 row melodeon, ideally around the size or smaller than a Castagnari Lilly, the smaller the better. As I doubt I'd be capable of competing with the Loffet's, Van der Aa's or Castagnaris in terms of build quality, flexibility and demand, I'd be aiming for the lower end of the pricing spectrum. Would that be expecting the impossible, perhaps?

It's clearly not impossible to get a 2 voice box smaller than a Lilly as Hohner's 1930s miniature boxes prove.  But remember that they made use of miniature reeds to achieve their designs and these are not available new today.  If you can make a tiny 3 voice I'd be the first in line to have a go on it!!! 

I do think that a lot of the major makers keep the instruments on the big size because the instruments will have a more mellow tone as a consequence as well as the bellows holding more air - both things desirable for a more continental style of playing.  Small punchy boxes are very desirable in English style playing and the more experimentation with making them the better I reckon.

I wish you all the very best of luck!
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

dunlustin

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 127
Re: Building my own box
« Reply #5 on: September 29, 2013, 10:27:46 AM »

You might want to look at this cv:

http://www.nouvelaccord.com/

One year's training with Cavognolo
Three-four years tuning before starting to work tuning for B Gaillard.
Fifteen years selling, repairing and tuning accordions before launching her own model of accordion (1994 -2009)
I believe there is also full-time training for musical instrument technicians.

I know lots of people have taught themselves to a high standard but might it be a good idea to start with repairs?
Perhaps you might buy a dirt cheap knackered PA and hone your tuning/valve replacement skills at no risk.
Logged

JohannPascher

  • Good talker
  • **
  • Offline Offline
  • Posts: 55
Re: Building my own box
« Reply #6 on: September 29, 2013, 11:09:27 AM »

Please look also on my ongoing project of building a nearly standard 4 row with three reeds Austrian style box with 46 buttons.
This time i will use a lot of parts available by different suppliers as the are in use in modern design boxes from Italy.
I am building two nearly equal boxes side by side.
At the moment i am working on the treble mechanism.
* One box will use leavers as the can be bought at DENA de CARIN the other box will be made with mechanism that is from RIHARD in Slovenia.

Please follow the postings at my facebook page and feel free to comment or ask question on each photo.
At the moment already 31 pictures are up to comment on.
https://www.facebook.com/johann.pascher/photos
« Last Edit: September 29, 2013, 11:42:17 AM by JohannPascher »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Building my own box
« Reply #7 on: September 29, 2013, 02:11:09 PM »

My initial plan is to design and build a 2 or 3 voice 2 row melodeon, ideally around the size or smaller than a Castagnari Lilly, the smaller the better. As I doubt I'd be capable of competing with the Loffet's, Van der Aa's or Castagnaris in terms of build quality, flexibility and demand, I'd be aiming for the lower end of the pricing spectrum.

Would that be expecting the impossible, perhaps?

Yes, unless you plan to do this as a charity and donate your time for free. 

If you don't aspire to build something to compete with the best available then you are on a dead end street.   I think the way to go is to offer something of at least as good quality as you can buy from established makers, but there has to be something different and individual about your offer.   For example look at the one-row boxes that Rees is building - taking ideas from traditional cajun, and from Hohner one-rows, putting the ideas together with considerable skill and coming up with something new and unique.  Not easy to do, but you do sound as if you are up for a challenge. (:)

On further thought, I think it might be possible to look at the other end of the market and try to design a thrift melodeon, absolutely basic materials and construction, but with decent quality components where it counts.   For example something to out-perform the Chanson mini melodeon toy, but airtight!  You might look for re-usable materials that could be used for the carcase, and perhaps some kind of industrial bellows,  I'm just rambling here, but I think there are possibilities.  It would need imagination and some design flair, but could become the ultimate economical learning box.
« Last Edit: September 29, 2013, 02:16:52 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Building my own box
« Reply #8 on: September 29, 2013, 02:49:08 PM »

If you want to achieve what you call your ultimate goal, you must be prepared to face the many challenges that will inevitably be lining up. To begin with, it's not so much about buying all sorts of tools and machines, but rather about acquiring and honing the necessary practical and theoretical skills. And when it comes to that, melnet will only take you so far. My advice would be to try and spend time (and I'm not talking days or weeks!) with an experienced, well-established box maker and try and learn as much as possible. I think you will be pleasantly surprised to discover that many of us are quite happy to share our "secrets"!
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Building my own box
« Reply #9 on: September 29, 2013, 03:21:35 PM »

We'll all give different views of most necessary tools, but the one I think we'd all agree on is you need a very determined mind and a LOT of patience, as I guarantee you'll come to some serious head scratching moments, and a few of complete frustration.  Of course, the frustration and challenges also lead to incredibly rewarding moments.

The tools I use most, in order:
table saw
drill press
belt sander (mine's a large edge sander)
routers/router tables
bandsaw

And most importantly LOTS and lots of jigs.

JohannPascher

  • Good talker
  • **
  • Offline Offline
  • Posts: 55
Re: Building my own box
« Reply #10 on: September 29, 2013, 07:34:38 PM »

I agree with nearly everything what has bin said by other people here especially the last three!
For my part i never had to make any box for commercial reasons, because i could earn my living through other occupations.
I started to repair boxes in the year of 1980. And have been a technician for all kind of electronics at that time.
I don't think i can compare with professionals even now.
On the other hand if one is younger and one has the goal of doing it for profession then with the modern equipment today available, like CNC and Laser and many prefabricated parts, it well is possible.
For instance take Gerhard Grübl with his "EDLER Harmonikas"
http://www.meinbezirk.at/abtenau/leute/moi-moi-trifft-griass-di-d53595.html
http://www.meinbezirk.at/abtenau/leute/die-bezirksblaetter-mitten-drin-statt-nur-dabei-m371204,53595.html
He has been TV Engineer, but his father relay stared with building and repairing boxes in his spare time, so he got in touch with the it in early youth at home. He learned to play boxes in his youth too. Then he one restored a old box on his own and the result was good enough to play with that box on different locations where he did not want to use professional box. His father still lives and owns about 50 old boxes, all in more or less good condition, i had the opportunity to have each box in may own hand.

So what all this more or less private insight?
It should show how difficult it is and that the personal background my make the difference.
At this time i would not advice to start with box building for professional reason, and if then only if you have some knowledge of programming CNC, and much more. I don't think that it is advisable to make boxes as i do with more or less the same tools as around 1900. Sill my last project tends in a more up to date direction. And the most important thing after making a mechanical perfect box is the tuning, and this is also a long long learning process and not everyone will learn to tune boxes because it also needs more as just to know how to do it.

Best regards, Johann
PS: some corrections on my text would be welcome, don't think it is good English but i hope it is readable.
« Last Edit: September 29, 2013, 10:20:50 PM by JohannPascher »
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Building my own box
« Reply #11 on: September 29, 2013, 09:05:47 PM »


I don't have an 'engineering' brain.

That is a bit of a setback. A melodeon is engineering in wood so you will be attempting to build an efficient machine with lots of moving parts.
I come from a solid engineering background and would have totally failed in my mission had it not been so.
In order to make a melodeon I had to learn about wood but that only took a year or so.
I have been learning to tune reeds for about 25 years and I think I'm getting the hang of that now.

Good luck in your endeavours, you must take the time to learn all of the separate skills required.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Building my own box
« Reply #12 on: September 29, 2013, 09:53:34 PM »

Although you may start off with the ambition to build the whole instrument by your own two hands, there are many reasons why manufacturers buy in perhaps most of the components - largely that you can get everything you need ready made and functional.  Indeed, I can only think of Doug Briggs who manufactures every component to a Rolls Royce standard and presumanly that's why he doesn't buy in the bits.  However, most of box design seems to be done by empirical means, just think of the discussions here about what materials and designs affect the tone of the finished box.  Also there are manufacturers who put the tuning and reed finishing to others.  That would be a sensible way to go whilst you learn the art.

For myself, I'd love to see someone try the Preciosa design, but taken to "normal" size so as to overcome the problems that miniaturisation caused.  I'm pretty sure it would be an outstanding instrument with unique tonal qualities (good or bad?).  It should have all the punch that the flat mounted reeds give, yet the bass would benefit from being stronger in tone with normal reeds.  But it would still make sense to buy in the mech, bellows and reeds! 

Rob.
Logged

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Building my own box
« Reply #13 on: September 29, 2013, 11:28:55 PM »

I wouldn't be put off by all the comments here though Noodle  ;)

It's all too easy to point out the difficulties of making your own boxes - it's definitely a very complicated thing.

However - you might be "the one" ... and the current state of affairs with common "bought in" components being used by the majority of european mid to high end boxes has led to a really rather dull variety of quite similar two-row instruments from everybody that have very little to choose between.  There are niches that may well not be a great business model to fill - but those boxes will not build themselves and the sheer delight in succeeding if you were to see it through would be a fulfilment you couldn't possibly ever get in another way.

Here's a link to my post with similar sentiments where everyone offered very good advice if you haven't already seen it http://forum.melodeon.net/index.php/topic,7135.0.html ... it's to my shame that I haven't acted on my own enthusiasm so far despite still having all the sentiments at the heart of the original post.  It is a very daunting prospect - but potentially brilliant too.
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Building my own box
« Reply #14 on: September 30, 2013, 11:40:22 AM »


On further thought, I think it might be possible to look at the other end of the market and try to design a thrift melodeon, absolutely basic materials and construction, but with decent quality components where it counts. 

And here is an example of the kind of thing kindly spotted by Liam Robinson. An Estonian thrift-Lõõtspill
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Building my own box
« Reply #15 on: September 30, 2013, 12:24:21 PM »


On further thought, I think it might be possible to look at the other end of the market and try to design a thrift melodeon, absolutely basic materials and construction, but with decent quality components where it counts. 

And here is an example of the kind of thing kindly spotted by Liam Robinson. An Estonian thrift-Lõõtspill

WOW!

Where can I get one of those?

 ;D
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Building my own box
« Reply #16 on: September 30, 2013, 12:48:23 PM »

I wouldn't be put off by all the comments here though Noodle  ;)

I hope my comments weren't taken as negative, though I can see how they might be.  I simpy meant that unless you have an idea for an improved design, then most of the components are available off the shelf, allowing you to build a quality box.  Perhaps over time you will build several to try out your design concepts, finally improving every aspect.  Meantime you can prototype each improvement individually.  Doing them all in one hit may be discouraging if one of them doesn't work, ruining the whole project.

Rob.
Logged

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Building my own box
« Reply #17 on: September 30, 2013, 05:59:42 PM »



And here is an example of the kind of thing kindly spotted by Liam Robinson. An Estonian thrift-Lõõtspill

WOW!

Where can I get one of those?

 ;D

I suspect the answer would be - make one! I can do you a couple of cardboard boxes and some duct tape to get you started on the bellows. Might want to have a word with Nick.

And the bass end seems to have some aspects in common with a Wesson Coracle, if memory serves.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Building my own box
« Reply #18 on: October 01, 2013, 01:19:05 AM »


On further thought, I think it might be possible to look at the other end of the market and try to design a thrift melodeon, absolutely basic materials and construction, but with decent quality components where it counts. 

And here is an example of the kind of thing kindly spotted by Liam Robinson. An Estonian thrift-Lõõtspill

WOW!

Where can I get one of those?

 ;D
I want those socks, please  (:)  (:)  (:)
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Building my own box
« Reply #19 on: October 01, 2013, 11:13:29 PM »

I recently started making my first box, and I do know the situation: So many aspects, and limited skills (working in management and sales does not really teach you how to operate a router or a chisel).

For me, it's a matter of three aspects.

First, I had to come to grips with what I did not know, and still does not know. Then: Practice. Tune a lot of boxes, and you'll gradually learn more an more about what makes a reed sound good or bad. I started about ten years ago changing a few valves, and moving further down the road to the point where I could finally tune a box and be happy with the results. Do some woodworking, get to know your tools, and keep in mind that it's okay to scrap a good number of lumps before you a comfortable doing your thing. This is also the reason the old advice about getting a cheap crappy box to practice on always keeps popping up...

Secondly; respect the ideas the people before you came up with. Look at as many boxes you can, inside and out, and gather the best ideas, combining with your own. There's a lot to be learned by looking at vintage instruments that's stood the test of time, and the pros and cons are clear to be seen after 50+ years of playing. Some ideas were not that good, others brilliant - you're the best judge to decide what you think, and what works for you.

Thirdly; keep it simpe, and do it right. You'll be doing it because you can't stay away from the workbench, not to become a millionaire, so remember the two most important factors in instrument making: Passion, and quality.

I still have a long way to go on my project box, and even though it can be frustrating, it's also great fun! Best of luck with your own project!
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal