Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Hohner Valve Adhesive question  (Read 9619 times)

0 Members and 1 Guest are viewing this topic.

Andy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 159
Hohner Valve Adhesive question
« on: October 02, 2013, 11:43:22 PM »

Hi

Hohner Valve Adhesive

Always a bit suspicious when manufacturers sell their own special products like this, without being very specific about exactly what it is.

Doubt very much if Hohner really do make or commission a unique adhesive. So what is this and what is the UK DIY store/ craft store equivalent?
 
Alternatively do you have reason to believe this is a special Hohner formula.

Thanks
Andy
Logged

Sage Herb

  • Steve Harrison
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 762
  • Slaithwaite, UK
    • The Black Box Band
Re: Hohner Valve Adhesive question
« Reply #1 on: October 02, 2013, 11:57:09 PM »

Hi Andy
I have a tube of this stuff, but the tube has no printing on it and didn't come with an instruction sheet. Hence I have no info about its constituents. I've not run across anything like it elsewhere (it's red and rubbery with not much odour) but others may know more. It works well, being relatively slow setting, easy to clean off the reedplate and goes a long way. Overall, it certainly does the job and makes it easy to line up your replacement valves. (I also use it to valve some of my diatonics.)
cheers
Steve
Logged
Hohner Erikas & Club 2s
Hohner gob-harps:
Vega Senator 5-string banjo; Alex Burns plectrum guitar

Black Box Band - www.theblackboxband.co.uk
Annie Dearman & Steve Harrison - www.dearmanharrison.co.uk
Phoenix - www.phoenixdanceband.co.uk
http://soundcloud.com/sage-herb

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Hohner Valve Adhesive question
« Reply #2 on: October 03, 2013, 12:39:47 PM »

The guy at Hohner USA parts shop told me what they sold was Pliobond.  I got some, and like it for leather valves, but it melts the plastic valves I have (not from Hohner).  Hohner must use a different material for their plastic valves.

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Hohner Valve Adhesive question
« Reply #3 on: October 03, 2013, 12:58:33 PM »

Hi all,

I think Hohner USA may once have sold Colmanite glue / paste.  It doesn't seem to be available now, not to start rumors. 

Aldo Mencacini told me to use slightly thickened Bulls-eye amber shellac, which is cheap.  You can also use the little bottles of gasket-sealer shellac (black) from NAPA and other auto-parts supply stores.

Based on the direct advice of an english concertina dealer, long ago I used an awful contact cement for valves but soon learned that was terrible advice, it's much harder to remove cleanly when needed.

PG
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Hohner Valve Adhesive question
« Reply #4 on: October 03, 2013, 01:34:25 PM »

Walter Virgini (rip)  used thickened old amber shellac mixed with  beeswax. It can be thinned with turp (entine)

Permatex gasket sealer has also been used... as mentioned by P Groff.. some is black... years ago it was dark amber and blackened with age... BTW it is a lousy , messy gasket sealer  but does have some interesting qualities such as gap filling. Often used on cork gaskets.
Logged

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: Hohner Valve Adhesive question
« Reply #5 on: October 03, 2013, 09:40:26 PM »

I use Evostik, a standard impact adhesive in the British Isles, so far successfully.  :|glug
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Hohner Valve Adhesive question
« Reply #6 on: October 03, 2013, 09:46:19 PM »

It seems Evostick is popular on that side of the pond.  Can't find it here in the US, anyone know of a similar substitute?

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Hohner Valve Adhesive question
« Reply #7 on: October 03, 2013, 11:15:14 PM »

It seems Evostick is popular on that side of the pond.  Can't find it here in the US, anyone know of a similar substitute?

I use Bostik Solvent Free (a rather boring glue  (:)). Clean and effective on all kinds of valves.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Hohner Valve Adhesive question
« Reply #8 on: October 04, 2013, 12:27:23 AM »

Water based types of contact adhesive should be chosen and used with great care (or even better: avoided), many of them have an annoying tendency to find their way all the way down to the reed itself (even when applied in very small quantities), with disastrous consequences.
My favorite glue is Bison Tix.
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Hohner Valve Adhesive question
« Reply #9 on: October 04, 2013, 04:56:11 AM »

Not seen Bison Tix (or at least not registered its existence!); I find Bison Universal works well.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Hohner Valve Adhesive question
« Reply #11 on: October 04, 2013, 12:59:47 PM »

Bison Tix is available here at an exorbitant price, but looking into it, it seemed to be just a polychloroprene rubber adhesive (neoprene contact adhesive)? 

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Hohner Valve Adhesive question
« Reply #12 on: October 04, 2013, 02:39:37 PM »


When I think of a contact adhesive, it is a one-shot operation. You apply it,let it near-dry then you have one hit at closing the joint - it grabs straight away with no allowance for adjustment.

Is that how Bison Tix is used?
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner Valve Adhesive question
« Reply #13 on: October 04, 2013, 03:13:50 PM »

I don't know about the Bison, but with any contact adhesive I've used you can cheat. Apply the adhesive to one surface and assemble immediately, then you have time to reposition if necessary. Works for me with leather or plastic valves.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Hohner Valve Adhesive question
« Reply #14 on: October 04, 2013, 04:18:14 PM »

The difference between wiggle room or no with contact adhesives is whether it's applied to one surface or both.

It looks like Bison Tix and Evo Stik is basically the same material?  Both neoprene contact adhesives.

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Hohner Valve Adhesive question
« Reply #15 on: October 04, 2013, 04:53:50 PM »

I have used Barge cement which is a contact adhesive that has been around for years...popular with shoe repair.  It is solvent based but has not melted any of the plastic valves I've used it on.  It cleans off pretty easily when you want to remove it.
Logged

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Hohner Valve Adhesive question
« Reply #16 on: October 04, 2013, 09:07:57 PM »

E6000 is available stateside and has a 10-50 second working time. It is clear. I wish there was a way to easily dispense a small amount without having to uncap and cap often. Any ideas?

Scott
Logged
too many boxes...please buy one, or two, or

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Hohner Valve Adhesive question
« Reply #17 on: October 05, 2013, 05:23:00 AM »

I'm with Theo on this one. Contact to one surface only (the valve), and only a very thin smear.

In 30+ years I cannot recall any returns with detatched valve problems, and because of the extremely thin coating I have found it is easily removeable if needed.

Too much thickness of any adhesive will create a sort of step in the valve at the point where the adhesive ends, reducing the efficiency of the valve by allowing air to escape at that point.

Wipe it on, then wipe most of it off....less is more....works for me.

Edited to add that the brand I use is Selley's Quikgrip. A bit more expensive that the "Shop o' S**t" brands from China, but my philosophy is that when you're on to a good product, stick to it.

Further edited to apologise for the shocking, unintentional pun...  :-X :-X :-X
« Last Edit: October 05, 2013, 05:30:31 AM by Malcolm Clapp »
Logged
Tuner/repairer, now retired.

Andy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 159
Re: Hohner Valve Adhesive question
« Reply #18 on: October 06, 2013, 04:24:48 PM »

Thanks for all the responses.

Given that I am not keen to get in to blending up a recipe, it looks like applying a contact adhesive to the valve only could be the best way for me to go.

Taking on board diatonix’s point about avoiding water based types of contact adhesive, I am tending towards regular Evo stik contact adhesive (I assume that the solvent free variety means water based)

Thanks again

Andy
Logged

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Hohner Valve Adhesive question
« Reply #19 on: October 06, 2013, 05:01:27 PM »

Bostik Solvent Free may, or may not, be water based but does not have any tendency to run if used sensibly. Very similar Hi-Tack "Very Sticky Glue" from Hobbycraft can also be used with good results.
Both are, in my opinion, better and easier to handle than either Evo Stik or Bostik contact adhesives but I have no idea how they last long term.
For that reason alone I would be inclined to use the proper Hohner glue available from CGM. It may be expensive for what looks like rubber solution but if you could use nail varnish (no one mentioned that) they would do so.
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal