Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner Lilput bellows taping  (Read 1590 times)

0 Members and 1 Guest are viewing this topic.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Hohner Lilput bellows taping
« on: October 03, 2013, 01:19:12 PM »

I have a Liliput in need of a bellows retape.

My original has the usual black tape, under which is a yellow cloth material that mostly covers the cardboard. Seen it elsewhere, of course, but not taken much notice.

The other box lacks this material, just has the black tape. I'd like to make it match. So what is the material in question - and does it need any special glue?

Secondly, for a Liliput - is the bellows tape the standard stuff, or is is thinner/narrower?

Cheers
Malcolm
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Hohner Lilput bellows taping
« Reply #1 on: October 05, 2013, 02:47:14 PM »

The yellow stuff is normally paper, with varying amounts of embossing.
You could get an almost exact match from Ratchford Ltd of Stockport
If you are not in a desperate hurry I can probably find a pattern and tell you the name.
(Or even find you enough to do a Liliput)
Dilute PVA is good enough to attach it but you are best to cover the folds individually rather than covering a complete side. (That tends to stiffen the bellows)
You can use "Proper" bellow tape, 19mm smooth is correct but you can get away with 25mm without it looking silly if the corners are round rather than square
Logged

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Hohner Lilput bellows taping
« Reply #2 on: October 05, 2013, 11:38:46 PM »

 You are quite right - on closer inspection it is an embossed paper. At fist glance it looked like a cloth. I'm not worried about an exact match, but I think I'd like to get a close match.
Quite surprised that the "new" box doesn't have any.

I was more concerned with the thickness of the bellows tape, since I imagine I will need narrower tape than for full sized bellows

Thanks for the reply 
Ps not in a rush  (:)

Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Hohner Lilput bellows taping
« Reply #3 on: October 06, 2013, 09:20:29 AM »

Malcolm, the Lilliput I bought from Fraton Accordions had been retaped. Trying to close the box is now nigh on impossible. The closing straps will have to be moved.
   I wouldn't have thought the thickness of tape would vary, after all a bellow is a bellow, bellows?
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Hohner Lilput bellows taping
« Reply #4 on: October 06, 2013, 10:21:21 AM »

Yes, must inspect it soon...

Interesting that, despite reading just about all posts about restoration, I don't recall seeing papers mentioned. Unlike concertinas, where it's common. Obviously it's the tape that takes the wear, but even so.
Will look up the supplier mentioned by an bosca ceoil, definitely interesting.  (:)

It will end up with new straps all round, so thickness won't be a problem, but at the same I don't want to change the "look and feel" more than necessary to get another eighty years out of it.

It's worth asking the questions, even if it looks bit stupid or basic. There was I time when I wouldn't ask such questions, but I've learnt that very often the most basic or "stupid" questions get very interesting answers. So had to thicken the skin a bit.

"Better to ask the question and look a fool, than not ask it and remove all doubt." As a wise man might have said. But probably didn't.  (:)
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner Lilput bellows taping
« Reply #5 on: October 06, 2013, 10:44:26 AM »

Modern Italian bellows tape is a good bit thicker than the stuff Hohner used in the 1930s, so your re-taped bellows will end up fatter and straps will need to be longer. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Hohner Lilput bellows taping
« Reply #6 on: October 06, 2013, 11:05:14 AM »

Both my Liliputs have black tape over yellow paper-covered bellows which have a slight "grain" (I wouldn't exactly call it a "pattern").

One still has the unworn original tape. The nearest match to this I could find is bookbinders' buckram from Shepherds Falkiners, which is the right texture, thickness and is also not too expensive. The only disadvantage is that it comes in paper roll form, so strips have to be cut from it - not a problem with a sharp scalpel and a good, long, heavy steel ruler. The advantages are that it looks like the original, is durable (think "library books") and doesn't dictate strap adjustments from over-thickness.

I should add that this buckram comes in a multitude of colours, and I found a very fetching and matching shade of brown to go over the green bellows on my Hohner Presswood, which I have converted from C/F to D/G. It's good for more than just Liliputs.

On a slightly different tack, I would be very keen to hear from anyone who knows of a source for tape (or the makings) which matches the patterned gold (not yellow) tapes on Preciosas, of which I have two about to undergo repair.
Logged

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Hohner Lilput bellows taping
« Reply #7 on: October 06, 2013, 11:06:16 AM »

Malcolm..''it's worth asking the questions even if it looks a bit stupid or basic...''.   I've learned so much since joining the forum using that principle, blushing into the keyboard the while.. Lester has done a brilliant bellows taping video by the way. I studied it for ages then took the plunge and finished up with a job well done. Don't think I would have progressed at all on the melodeon front without Melnet. What larks Pip ...
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal