Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Limiting Weltmeister button travel?  (Read 1682 times)

0 Members and 1 Guest are viewing this topic.

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Limiting Weltmeister button travel?
« on: October 14, 2013, 10:38:23 AM »

Hello All,

I'm just replacing springs in an old Weltmeister for a friend (Like this: eBay item number: 151095928108)
With a 'closed' keyboard that has been assembled around the levers and has no removeable panel, that in itself is something of a challenge.
I'm up for challenges, but the plan was to limit the button travel and so far that HAS got me stumped.

Plan A,  a travel limiter under the buttons, doesn't work because the springs are in the way. Plan B was to glue a strip along the top inner edge of the keyboard just above the levers to limit their upward movement  - but has two problems: the construction tolerances are so wide that every button would have slightly different travel, and it would put an increased load on the axle/pivot area.
Plan C could be something to restrict the movement of the pallets off the soundboard but looks like a non starter as the levers are very flimsy and would quickly be bent by even a moderately heavy fingered player. (Even more than they already are!)

Any other suggestions gratefully considered  ;D

I suspect it's best regarded as a very basic instrument best accepted with its limitations, and then quickly passed on when those become an obstacle.

Thanks,

Graham

 

Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Limiting Weltmeister button travel?
« Reply #1 on: October 14, 2013, 11:12:21 AM »

Plan C could be something to restrict the movement of the pallets off the soundboard but looks like a non starter as the levers are very flimsy and would quickly be bent by even a moderately heavy fingered player.

Years ago I did it this way on a Pokerwork. I thought the levers might get bent but they didn't, to any extent that mattered. I don't know how your Weltmeister levers compare to the Hohner's, but the latter didn't seem all that substantial.

But if you try it and it breaks, don't blame me!  >:E
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Limiting Weltmeister button travel?
« Reply #2 on: October 14, 2013, 11:55:00 AM »

Ditto, it worked, but boy did it rattle! Needs a bit of felt/foam too IMHO
Logged
  _       _    _      _ 

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Re: Limiting Weltmeister button travel?
« Reply #3 on: October 14, 2013, 01:15:44 PM »

This is a Weltmeister 86W?

I have one and lowered the buttons by taking off the grill and holding the levers down while pushing in the buttons. It took awhile to get all the buttons to be lowered by the same amount because the levers have a lot of flex but I managed to get them all lowered and more or less to the same button height.
Logged
Sean McGinnis
Bordentown City, NJ, USA

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Limiting Weltmeister button travel?
« Reply #4 on: October 14, 2013, 01:35:02 PM »

This is a Weltmeister 86W?

I have one and lowered the buttons by taking off the grill and holding the levers down while pushing in the buttons. It took awhile to get all the buttons to be lowered by the same amount because the levers have a lot of flex but I managed to get them all lowered and more or less to the same button height.

Yes this can work, but be aware that you can alter the lever geometry and end up with pallets not lying completely flat resulting in numerous tiny air leaks. If that happens the solution is simply to remove all the pallets and re-fix them to the arms.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: Limiting Weltmeister button travel?
« Reply #5 on: October 14, 2013, 02:26:23 PM »

This is a Weltmeister 86W?

I have one and lowered the buttons by taking off the grill and holding the levers down while pushing in the buttons. It took awhile to get all the buttons to be lowered by the same amount because the levers have a lot of flex but I managed to get them all lowered and more or less to the same button height.

That will reduce the height the buttons stand proud ABOVE the keyboard.
What I want is to limit their downwards travel so they don't descend BELOW the keyboard surface.

It's relatively easy to achieve this on a Hohner, but this Weltmeister keyboard is a totally different beast.

On this particular instrument the D row buttons at full depression are 8.5mm below the keyboard!
Logged

boxer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 380
  • B/C Pokerwork - ultimate ceili box
Re: Limiting Weltmeister button travel?
« Reply #6 on: October 14, 2013, 04:22:32 PM »

I fixed my Pokerwork on the broad principles of Plan C about six years ago.  The difference is that the travel limiter sits under the button side of the pivot (rather than the pallet side), within about 5mm of the bearing.  This means that, at the limit of travel, excess finger pressure is applied to less than a couple of inches of straight metal, rather than to the whole convoluted length of the L shaped lever. 

The box has been played heavily and continuously ever since the modification, with no sign of the apparently flimsy levers or bearings suffering any distress, so I guess this approach to Plan C might work for a Weltmeister too.
Logged
Nuage, Tommy, Cairdin, 
Double Ray DLX 21x12, Black Dot,
Pre-Erica, Pokerwork
plus various stringed things
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal