Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Crappy brass reed box: bellows repair...the corners  (Read 3009 times)

0 Members and 1 Guest are viewing this topic.

Rog

  • Hero Member
  • *****
  • Online Online
  • Posts: 2525
  • Repair and tuning in Hants
Crappy brass reed box: bellows repair...the corners
« on: October 16, 2013, 07:34:30 AM »

A subject that has been covered ad nauseum...
I've seen Nick Collisbird's vid on how to make leather diamonds/gussets for the diamond shaped hole where the card meets on homemade bellows ( for his Chanson).
I am rebuilding one of those crappy German boxes with brass reeds, just to prove I can bring it back to life &c. It's largely a pile of firewood so I'm glueing it back together at the moment.
 The bellows aren't too bad but there are one or too little holes right on the very apex of some corners just above the little leather gussets. I'm thinking of using little bits of very thin leather glued from inside, but is there a better way?  BTW the bellows don't have any tape on the edges, AFAICT.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Crappy brass reed box: bellows repair...the corners
« Reply #1 on: October 16, 2013, 09:03:31 AM »

The bellows aren't too bad but there are one or too little holes right on the very apex of some corners just above the little leather gussets. I'm thinking of using little bits of very thin leather glued from inside, but is there a better way? 
That's exactly the way in which Dave Elliott, the highly respected concertina repairer/restorer repaired the bellows of my Wheatstone English concertina a few years ago. Thin (0.2 mm) leather for repair/binding is available from Mark Adey concertina spares (formerly David Leese) here (scroll down the list).

Use PVA glue diluted 50/50 with water. Apply to the leather patch and press into place from the inside of the bellows using a blunt lolly stick or similar. Wipe off any excess glue which oozes out with a damp cotton bud. 
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Crappy brass reed box: bellows repair...the corners
« Reply #2 on: October 16, 2013, 09:20:47 AM »


Use PVA glue diluted 50/50 with water.

Better still use the correct glue for the job leather cement easier to use, and stronger bond on leather than pva.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Crappy brass reed box: bellows repair...the corners
« Reply #3 on: October 16, 2013, 09:47:44 AM »


Use PVA glue diluted 50/50 with water.

Better still use the correct glue for the job leather cement easier to use, and stronger bond on leather than pva.
Just reporting on what Dave used...
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Crappy brass reed box: bellows repair...the corners
« Reply #4 on: October 16, 2013, 10:11:57 AM »


Use PVA glue diluted 50/50 with water.

Better still use the correct glue for the job leather cement easier to use, and stronger bond on leather than pva.

I don't know about leather cement, in fact never heard of it. But if Theo recommends it then I'm sure it will be fine.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Crappy brass reed box: bellows repair...the corners
« Reply #5 on: October 16, 2013, 10:19:54 AM »

http://leatherworker.net/forum/index.php?showtopic=36923

Small worlds… with luck someone at leatherworker.net might even link back here!  ;)
Logged
  _       _    _      _ 

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Crappy brass reed box: bellows repair...the corners
« Reply #6 on: October 16, 2013, 10:36:50 AM »

I use the same method with small pieces of thin leather.  The right sort of leather can often be had for free   by putting the word out that you  would be grateful for odd ladies gloves which usually get     shoved in a drawer   when t'other one is lost!  Ladies glove leather is ideal and just one glove will provide several patches.  Recycling at its best!

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

Rog

  • Hero Member
  • *****
  • Online Online
  • Posts: 2525
  • Repair and tuning in Hants
Re: Crappy brass reed box: bellows repair...the corners
« Reply #7 on: October 16, 2013, 10:44:51 AM »

Hi all,

Great. I'm on the right track then. I was also impressed by Nick's leather paring/skiving and in the interests of keeping the costs down I bought a big bag of assorted leather off cuts (eBay, £8) so all I need to do is pare off some thin patches. However, I like the idea of old ladies gloves (i know i know grammatical ambiguity) I'll look in charity shops for these. I may try PVA to start as I've already forked out a few quid for materials.  However I'll keep a lookout for leather cement. I'll keep you posted on progress.

Rog

  • Hero Member
  • *****
  • Online Online
  • Posts: 2525
  • Repair and tuning in Hants
Re: Crappy brass reed box: bellows repair...the corners
« Reply #8 on: October 16, 2013, 11:26:15 PM »

Bearing in mind that these bellows are really shot to pieces, so anything I do to them is purely to try stuff out.... I didn't want to use my PVA wood glue or the Bostick Impact adhesive, so I've stuck a couple of patches on using Copydex, which seems to work fine. Any reason why this might be a bad idea?
Btw they are taped, so might have to replace this; Gorilla gaffer tape probably would not look v nice ;)

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Crappy brass reed box: bellows repair...the corners
« Reply #9 on: October 18, 2013, 04:41:45 PM »

Roger, don't use Copydex. After a month or two it becomes a horrible sticky mess.
Bit like me after a folk festival :-X
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Rog

  • Hero Member
  • *****
  • Online Online
  • Posts: 2525
  • Repair and tuning in Hants
Re: Crappy brass reed box: bellows repair...the corners
« Reply #10 on: October 19, 2013, 12:20:43 AM »

Roger, don't use Copydex. After a month or two it becomes a horrible sticky mess.
Bit like me after a folk festival :-X

Oh. Damn. The bellows really are full of holes though. Did you use PVA when sticking leather onto your bellows?
V good learning process this. First thing to do when fixing up a box is to stop it leaking, starting with the bellows, and if they are useless there's no point in going further until you solve that problem one way or another.

I think I'll follow Theo's advice and get some leather cement.
« Last Edit: October 19, 2013, 12:26:30 AM by RogerThomas »
Logged

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Crappy brass reed box: bellows repair...the corners
« Reply #11 on: October 19, 2013, 08:59:49 AM »

Wonder if the thought process differs for an "old dog" or a "decent" box.

I would have looked at the reeds first, because if it uses long reed plates they could be hard to replace if knackered.
Then looked at the woodwork to check it wasn't twisted or inhabited.
(You have probably already done that, though).

If the economics permit, you can get bellows made.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal