Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Tales from the workshop  (Read 9985 times)

0 Members and 1 Guest are viewing this topic.

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Tales from the workshop
« Reply #20 on: October 19, 2013, 08:20:49 AM »

Hot glue is impossible to get off!

No it isn't at least I can get it off quite successfully
[/quote

I agree with Lester, a hair dryer and a wood scraper should do the trick.
Don't confuse the hot glue gun with hot melt, two very different animals
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Tales from the workshop
« Reply #21 on: October 19, 2013, 09:35:45 AM »

Don't confuse the hot glue gun with hot melt, two very different animals

I probably was.  :|bl
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Tales from the workshop
« Reply #22 on: October 19, 2013, 11:01:02 AM »

Rawlplugs seems a bit industrial, but I did recently fix loose screws inside a box by pushing a shaved down matchstick into the over-sized screw hole. Trim off surplus on both ends and now screws up tight. I use this trick around the home also for loose door hinge screws etc, using suitable sized dowling.

 

Same here. Works every time. Just remember to strike the match first !
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Tales from the workshop
« Reply #23 on: October 19, 2013, 11:05:16 AM »

Ditto - done this a lot in household repairs. A single piece of match can move screws off centre though, and sometimes a sliver both sides is better. It's subtle stuff. Even repairing windows IME a single match has lasted all morning!
Logged
  _       _    _      _ 

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tales from the workshop
« Reply #24 on: October 19, 2013, 11:29:24 AM »

Back to topic:
Repairs to cracks in woodwork where glue is plastered onto cracks and forced into cracks, but not clamped to close the crack.  Just had to discard a reed lock done like this because it was impossible to get all the old hard glue out to do a proper repair. 

Now if the folk who botch repairs could be persuaded to use scotch glue...
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Tales from the workshop
« Reply #25 on: October 19, 2013, 12:16:42 PM »

it's the Scotch before the glue that does it Theo  ;) AtB mory
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Tales from the workshop
« Reply #26 on: October 19, 2013, 12:19:37 PM »

Don't get me started about silicone rubber. >:(

I believe Theo is still having nightmares after rebuilding my Preciosa - a difficult box to work on at the best of times, but it had all the treble reeds "stuck" in with RTV.  It did make a strange sound!  Current project is to make a new reed pan as the reed wax doesn't stick properly to the contaminated surface...

Rob.
Logged

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Tales from the workshop
« Reply #27 on: October 19, 2013, 07:38:14 PM »

I bought a Hohner on eBay described as a "project," no photos of the the reeds. When it arrived I found many signs of attempted repair including the reeds covered in rosin core solder. Mess!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tales from the workshop
« Reply #28 on: October 19, 2013, 10:01:11 PM »

I've seen solder applied to the middle of reeds to lower the pitch. Disaster! Done by somebody on E Anglua apparently.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Tales from the workshop
« Reply #29 on: October 20, 2013, 02:19:16 AM »

I agree totally that the use of solder on the middle of the reeds is a disaster.

However, I'm sure that Theo or Christopher would not completely condemn the use of solder in tuning if done carefully, and only at the tips of reeds. I have successfully retuned a set of Preciosa treble reeds from CF to AD (3 semitones) using solder on EVERY reed. Little, if any, loss of response, and pretty easily reversible.

But I would stress the word "carefully"....and remember to clean off any solder or rosin that has run onto the back or edges of the reed.

I doubt that the amount of time the reed is subject to heat would much alter the temper of the steel, though I use a heat sink just in case. I would welcome comments on this aspect....



Logged
Tuner/repairer, now retired.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tales from the workshop
« Reply #30 on: October 20, 2013, 09:02:32 AM »

Conpletely agree Malcolm. Though if I wanted an AD Preciosa the Bb/Eb would have been a closer starting point!

Regarding heat drawing the temper of steel, it's not the length of time that is critical, it is the temperature, and typical soft soldering temperature is well below the level that will damage spring steel.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Tales from the workshop
« Reply #31 on: October 20, 2013, 09:32:11 AM »

Though if I wanted an AD Preciosa the Bb/Eb would have been a closer starting point!

It wasn't that I really, really, really wanted an A/D Preciosa.
It was more a matter of what to do with the impulse buy of a C/F that was surplus to requirements!

MAD remains endemic in these parts....
Logged
Tuner/repairer, now retired.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Tales from the workshop
« Reply #32 on: October 21, 2013, 07:27:56 AM »

A box I picked up had a reed missing from the chord section of the bass , I found it, someone had araldited it into a blank slot in one of the treble reedblocks ..

On an Italian B/C I bought to rebuild, someone had put all the bass end reeds back with builders mastic , the ones which actually sounded were in the wrong place..
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Tales from the workshop
« Reply #33 on: October 21, 2013, 08:13:53 AM »

Ceraphobia, I believe it's called. Fear of wax....
Logged
Tuner/repairer, now retired.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Tales from the workshop
« Reply #34 on: October 21, 2013, 10:35:53 AM »

I`ve seen candle wax before as well, less dramatic as it does no damage - well not if the reeds stay in place anyway..

Far worse was a recent Student-1 bass block had the large bass reeds Nailed in with those short galvanized roofing felt nails after being stuck in with Evostik upside down in the wrong place, I had a lot of clamping and hole filling (with cocktail sticks) to do to save that reedblock .

A known repairer (not of this forum I may add) who will remain nameless had lathered the front soundboard to frame edges and corners of a 4 stop I bought with reedwax to try and seal it, I couldn`t remove it to do a proper repair on the soundboard but managed to sort the corners after a hard time removing as much wax as possible.
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Tales from the workshop
« Reply #35 on: October 21, 2013, 08:53:03 PM »

Don't invite one of our illustrious moderators into your workshop then knock you mug of tea over all your tools  :o

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Tales from the workshop
« Reply #36 on: October 21, 2013, 09:31:59 PM »

Don't invite one of our illustrious moderators into your workshop then knock you mug of tea over all your tools  :o

Snigger  ;)
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Tales from the workshop
« Reply #37 on: October 21, 2013, 10:39:25 PM »

My linota concertina had had an accident. The right end hexagon from had been damaged. Having bought it, I noticed that (judging from a string line) 1/3 of the hexagon had been glued back upside down,

Fast forward 20 years, got it to the Dippers "to put into playable state" … 2 years … oh, it's in one of the boxes. Boxes! Yes, bad previous repair, it'd have warped in another 20 or so years. Slow forward another 2 years and a bribe of a bottle of bordeaux. String line finally straight. Now sold and funded a nice melodeon.
Logged
  _       _    _      _ 

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Tales from the workshop
« Reply #38 on: October 24, 2013, 04:01:29 AM »

I currently have a old one row pokerwork that someone nailed the wood keyboard to the body. Had another one where someone had put wood glue all around the keyboard of a two row and glued it down (loads of fun getting that loose)
 Lots of audio tape used for valves (it works pretty well for awhile but it seems to curl after a bit from what I see). The one I was impressed by,as I would never think it would work ,was to cut off the tip of a reed and block the resulting gap with tape to get a higher note using an old bass side reed. The other is to lower pitch by adding nail polish or wax to reed tips (pain in the ass to tune later)
 The repairs in the second group are mostly from Mexico where there are few if any repair shops or available spares.

I have a Bandeoneon that Tom Waits purchased somewhere,it had been dropped or crushed, badly glued back together,then carefully  sanded and painted. You had to take it apart to figure out why it was leaking all over, it would be an insane repair job. Mr. Waits bought a newer AA that I had just rebuilt instead.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Tales from the workshop
« Reply #39 on: October 24, 2013, 07:57:59 AM »

THE Tom Waits, the one who's piano has been drinking ? Wow, awesome !

Btw I used white enamel paint on my pokerwork reeds to lower the pitch. It works, it's easy to scrap a bit off to bring the pitch back up a bit, and it's easy to remove totally if required using a blade and a dab of thinners.

It's the 'hobby' paint that's used on plastic models (used to be Humbrol paint in the UK)
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal