Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: sticky key  (Read 8047 times)

0 Members and 1 Guest are viewing this topic.

IanD

  • Hero Member
  • *****
  • Online Online
  • Posts: 1703
  • Too many melodeons...
Re: sticky key
« Reply #20 on: October 20, 2013, 04:45:41 PM »

However, I was in a windmill once in Holland, in Leyden. And the Miller, never forgot his name ,Franz Croon or Frank Crown if you like. I was wearing a Barber waxed jacket at the time  and he invited us to come in and explore the windmill. Wax and flour don't mix. Anyway, at the top of the mill, the sails were whizzing round at a terrifying speed. I noticed some sheep fat hanging up (Lanolin). On questioning he said "ah yes, this mill is 300 hundred years old and we use Sheep fat to make the gears quieter and stop them wearing" all the cogs were wood and looked as good as they day they were made.
On emerging, someone said in an American voice " jeez, they got real Flour Graders in there"

So maybe Lanolin around the wooden bits?
Wood on wood can benefit from some lubrication, because both surfaces are similar hardness. I also guess a slight amount of stickiness isn't really a problem for a windmill, but it is for melodeon keys.

For low wear without lubrication you want one surface to be much harder than the other, for example metal and wood, or brass and steel in clocks.
« Last Edit: October 20, 2013, 04:47:44 PM by IanD »
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: sticky key
« Reply #21 on: October 20, 2013, 06:35:58 PM »

No sprays please. Graphite is good, you can rub a pencil on the side of the levers.
I use Russian Tallow when fitting screws in freshly drilled pilot holes. It is made from beef fat!
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: sticky key
« Reply #22 on: October 20, 2013, 08:08:33 PM »

Glad to report that it work (:)
I ended up just pulling harder and it did come out.
I gave everything a good cleaning, the rod had some bumps so I sanded smooth and used it to ream out holes.
It's know playing better than ever and I got rid of the squeaky spring on button 6 by repositioning the spring
Thanks to all for the tips (except pikey ;))
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: sticky key
« Reply #23 on: October 20, 2013, 10:31:55 PM »

 (:)
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: sticky key
« Reply #24 on: October 20, 2013, 11:00:57 PM »

Is there enough axle sticking out to hold in the chuck of a cordless drill. If so, try revolving it very slowly as you pull it out. Beware, brass axles will snap, steel should be OK.

I have instructions in a book somewhere which advise connecting a car battery to each end of the axle. This a desperate measure which I have tried only once. Clouds of smoke ensued from a rather pretty Oakwood.

This...er...book. Is this a car mechanics book, or a notebook?

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: sticky key
« Reply #25 on: October 21, 2013, 07:58:32 AM »

'1001 things to do with an accordion'.......
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: sticky key
« Reply #26 on: October 21, 2013, 11:25:48 AM »

Is there enough axle sticking out to hold in the chuck of a cordless drill. If so, try revolving it very slowly as you pull it out. Beware, brass axles will snap, steel should be OK.

I have instructions in a book somewhere which advise connecting a car battery to each end of the axle. This a desperate measure which I have tried only once. Clouds of smoke ensued from a rather pretty Oakwood.

This...er...book. Is this a car mechanics book, or a notebook?

Accordion Repairs Made Simple - ISBN 1904891233. Page 19.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Mike Averill

  • suffering from MAD
  • Respected Sage
  • ****
  • Online Online
  • Posts: 325
Re: sticky key
« Reply #27 on: October 21, 2013, 06:24:23 PM »

No sprays please. Graphite is good, you can rub a pencil on the side of the levers.
I use Russian Tallow when fitting screws in freshly drilled pilot holes. It is made from beef fat!

I was taught to use tallow as a lubricant when boring long holes in wood. Works well but can stink a bit.
Logged
Hohner - 1 row 4 stop C and G, pokerwork DG, DoubleRay DC#, Corso CC#, Corona III ADG, CLUB X CF, Elysium II CF
Saltarelle 1 row 4 stop D, Castagnari Giordy DG, Sander DG
Sonola CC#, Walters DC#

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: sticky key
« Reply #28 on: October 21, 2013, 06:34:00 PM »

Would paraffin wax do the same job? Apart from the smell, of course. Or is it not worth the candle?
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: sticky key
« Reply #29 on: October 21, 2013, 06:50:58 PM »

No sprays please. Graphite is good, you can rub a pencil on the side of the levers.
I use Russian Tallow when fitting screws in freshly drilled pilot holes. It is made from beef fat!

I was taught to use tallow as a lubricant when boring long holes in wood. Works well but can stink a bit.

Not really relevant here as we aren't discussing anything that involves boring long holes in wood.

It really frustrates me when people keep coming up with "reasons" for using lubricants in places where they just don't belong.  Ask anyone who does box repair work for a living and you will always get the same answer:   

wooden levers running on a steel or brass axle in a properly set up melodeon keyboard do not need lubricating.

 It is that simple.  Liquid oils, greases and waxes are harmful in the long term because of the dust and grit that they trap.   Dry lubricants like graphite or talc are harmless and can sometimes help when dis-assembly is not possible, but they are not normally necessary.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: sticky key
« Reply #30 on: October 22, 2013, 05:08:22 PM »

No sprays please. Graphite is good, you can rub a pencil on the side of the levers.
I use Russian Tallow when fitting screws in freshly drilled pilot holes. It is made from beef fat!

I was taught to use tallow as a lubricant when boring long holes in wood. Works well but can stink a bit.
Nearly as relevant -  I was taught that sawdust with oil was good for noisy differentials.
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: sticky key
« Reply #31 on: October 23, 2013, 11:25:18 PM »

I wouldn't wish to contradict Ian's opinion on graphite, but it reminded me of various failiure modes of plain bearings.  In general a bearing is made of softer material than the shaft passing through it, apart from long-term wear as per the design parameters, problems arise when contaminants become embedded in the soft bearing surface and become an abrasive on the journal suface.  In the case of graphite dust, I guess it would depend whether the particles embed deeply enough in the wood to become a permanent lubricant or remained as an abrasive.  Incidentally, graphite powder is recommended by locksmiths rather than oil to lubricate a lock.

With a Nik that occasionally suffered from sticking keys in wet weather (yes, I know I shouldn't be playing in the rain...) I had to disassemble the keyboard and shorten the keys as the ends were where they stuck.  I rubbed them with a candle, as used to be done to make a furniture drawer move smoothly, in the hope that it might also prevent ingress of moisture.  I have to say that the keyboard never gave any further trouble and the action was slightly improved - but the wax applied was imperceptible, basically just filling the grain and then polished.

Rob.
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: sticky key
« Reply #32 on: October 24, 2013, 12:55:03 AM »




wooden levers running on a steel or brass axle in a properly set up melodeon keyboard do not need lubricating.


Agree button has been pressed
I notice that the levers on the sticking buttons where not spinning freely until I ream them out then they could rotate without getting stuck - then there would not be any reason for lubricant. and having said that I am also doing this at a time when moisture levels are high so it's only going to get better.

I wouldn't wish to contradict Ian's opinion on graphite, but it reminded me of various failiure modes of plain bearings.  In general a bearing is made of softer material than the shaft passing through it, apart from long-term wear as per the design parameters, problems arise when contaminants become embedded in the soft bearing surface and become an abrasive on the journal suface.  In the case of graphite dust, I guess it would depend whether the particles embed deeply enough in the wood to become a permanent lubricant or remained as an abrasive.  Incidentally, graphite powder is recommended by locksmiths rather than oil to lubricate a lock.

With a Nik that occasionally suffered from sticking keys in wet weather (yes, I know I shouldn't be playing in the rain...) I had to disassemble the keyboard and shorten the keys as the ends were where they stuck.  I rubbed them with a candle, as used to be done to make a furniture drawer move smoothly, in the hope that it might also prevent ingress of moisture.  I have to say that the keyboard never gave any further trouble and the action was slightly improved - but the wax applied was imperceptible, basically just filling the grain and then polished.

Rob.
Rob,
I think in this situation there may have been graphite used on the affected keys at some point( I see some dark gray residue there but it could have been dirt.) and it may have acted like an abrasive as there where very slight perpendicular grooves left even after I sanded smooth and these where in line with the space between finger board and levers.
On your Nik did you cut the Keys / levers on the bottom or the part closest to the sound board / fondo? or the end near buttons?



Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: sticky key
« Reply #33 on: October 24, 2013, 12:12:28 PM »

The Nik's levers were slightly too long - a snug fit when dry, but they elongated when the humidity rose and the ends (nearest the buttons) would touch the outer end of the rebate in the keyboard.  Such a small adjustment needed that I simply sanded the ends to smooth the end grain and rubbed with a candle.

Rob.
Logged

IanD

  • Hero Member
  • *****
  • Online Online
  • Posts: 1703
  • Too many melodeons...
Re: sticky key
« Reply #34 on: October 24, 2013, 02:06:30 PM »

I wouldn't wish to contradict Ian's opinion on graphite, but it reminded me of various failiure modes of plain bearings.  In general a bearing is made of softer material than the shaft passing through it, apart from long-term wear as per the design parameters, problems arise when contaminants become embedded in the soft bearing surface and become an abrasive on the journal suface.  In the case of graphite dust, I guess it would depend whether the particles embed deeply enough in the wood to become a permanent lubricant or remained as an abrasive.  Incidentally, graphite powder is recommended by locksmiths rather than oil to lubricate a lock.

With a Nik that occasionally suffered from sticking keys in wet weather (yes, I know I shouldn't be playing in the rain...) I had to disassemble the keyboard and shorten the keys as the ends were where they stuck.  I rubbed them with a candle, as used to be done to make a furniture drawer move smoothly, in the hope that it might also prevent ingress of moisture.  I have to say that the keyboard never gave any further trouble and the action was slightly improved - but the wax applied was imperceptible, basically just filling the grain and then polished.

Rob.
For lubricating a stiff lock graphite is undoubtledly better than oil -- but a melodeon lever is not a stiff lock, and you don't usually lock and unlock something tens or hundreds of thousands of times. Introducing particles of any description (including graphite) into this kind of bearing is never a good idea, as Theo says -- as best it might appear to help in the short term, at worst it will make things wear faster in the long term, and it's the wrong way to fix the problem.

(and don't forget that a pencil isn't nice soft pure graphite, it's also got not-so-nice abrasive particles of things like clays and fillers in it)

If the reason for sticking was friction on the sides of the lever then wax might help (though sanding down the sides of the lever is probably the right solution), but the OP said the problem was binding on the pivot rod :-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: sticky key
« Reply #35 on: October 27, 2013, 10:59:50 AM »

Agreed, I have only rubbed with a candle between wooden faces on an open keyboard and then polished to remove any excess.  If the problem really is with the pivot, then a new rod is probably the ideal solution (along with cleaning the holes in the keys).

Rob.
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal