Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Earliest Al reedplates - when?  (Read 7776 times)

0 Members and 1 Guest are viewing this topic.

Hasse

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 323
Earliest Al reedplates - when?
« on: October 20, 2013, 08:33:21 PM »

A question I been meaning to ask here for a loooooong time, but never got around to.

First question:
Anyone here knows/got an idea when the makers first started putting aluminium reedplates in boxes? 

I had a really wrecked A/D laying around for years, old box, looked like 1920th -1930th but with no name visible. It had some wonderful sounding steelreeds on aluminium reedplates, (see picture), the reeds are now converted to C#/D and sitting in a other box. The only fragment of the box I could locate this evening in my tiny and overfull workshop is in the picture below. The reeds are rather short, but very responsive and mellow sounding!

So my second question: Anyone got any idea or a good guess on the age of the aluminium reedplates from this box (see photos)? Can it be as early as 1920s or even earlier?

Edit: I remembered wrongly it didn't have: "On the treble side it had those common "STAHLSTIMMEN" labels.", so I removed that sentence.
« Last Edit: October 29, 2013, 09:34:29 PM by Hasse »
Logged
Sweden, Skåne

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Earliest Al reedplates - when?
« Reply #1 on: October 20, 2013, 09:55:19 PM »

I can tell you with confidence that aluminium reedplates were first used in some special, professional-quality, English concertinas as early as 1894, but aluminium was a very new material then, so that the statue of Eros in Piccadilly Circus, London was one of the first to be cast in it, in 1893.

However, the metal used in those early instruments (and Eros, who has undergone extensive repair and reinforcement) was too pure, and tended to corrode badly, so much so that I have seen examples of concertinas that had been rendered unplayable because of the build-up of white, powdery, oxidation on the reedframes.

Later instruments have employed an aluminium alloy, called Duralumin (patented by German metallurgical engineer Alfred Wilm in 1909), with much greater success. But it became much more common after the First World War than it had been before it.

The story with accordions probably parallels this, though the first reference I have to the use of aluminium in them is in an early-1920s catalogue of the innovative San Francisco makers Guerrini Company, which seems to be referring back to 1914 - "Alluminum plates. Hand made steel reeds, system patented 1914."

But aluminium reedplates seem uncommon in (say) Hohner melodeons until the mid 1930s - and personally I prefer the ones with zinc plates.

Hasse

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 323
Re: Earliest Al reedplates - when?
« Reply #2 on: October 21, 2013, 08:48:57 PM »

What a great history lesson! Just what I wanted to now more about. Thanks!  (:)

- and personally I prefer the ones with zinc plates.

I tend to agree with you on that, and these old reeds/Al-reedplates of my wouldn't do lack some punch. But it's very responsive reeds and dry tuned they give a very sweet mellow sound, (not especially loud though). But I certainly wouldn't mind getting hold of more like that!
Logged
Sweden, Skåne

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Earliest Al reedplates - when?
« Reply #3 on: October 21, 2013, 10:19:49 PM »

Hi all,

The zinc plate and aluminum reeds definitely overlapped chronologically, even within the Hohner and Paolo Soprani brands (not surprising since each of those brands covered a huge range of models made in multiple factories).

WRT the San Francisco manufacturers, I think the earliest San Francisco Galleazzi chromatic accordions that I've seen had steel reeds on brass plates.  Will check my early San Francisco P. Guerrini chromatic* later this week, but I believe it has steel reeds on aluminum plates.  My 1920s Galleazzi piano accordion* has incredible reeds on aluminum plates, each plate stamped for its rank in the voicing IIRC.

The nicest early Italian boxes I've seen by Dallape (GCB semi-diatonic or mixte, and piano-key, ca 1898 to 1920s) and Serenelli (1910s piano-key) had very nicely made steel reeds on aluminum plates.  I've recently been searching images of other early Dallapes (including chromatics and GCBs, some from the Dallape museum, dated from the early 1900s), and all seem to have aluminum plate reeds.**  When I get a chance I will do a photo-essay on a nice Dallape GCB and will add some pics of leftover parts from a couple of wrecked ones (water damage  :( )

The reeds that Hasse shows, on aluminum plates and with a circular stamp (partly obscured by the notch in his case) look similar to reeds I've seen in various Italian and german diatonic boxes that I believe date from the 1920s to 1930s, including Settimio Soprani, Paolo Soprani, Ploner, and Globe Gold Medal Professional Deluxe. Some 1930s Walters also have been found to have aluminum reeds with a similar stamp. It's possible that those reeds when found in Walters are re-purposed reeds, but if so they are very clean as found in the Walters where I've seen them.   

The circular stamp on zinc plates has shown up on a C# Paolo Soprani Abbruzzi organetto and on a very nice Hohner 3-row box here.  Some 1940s Walters had a rank or more of zinc-plate reeds but at the moment I don't remember if those were stamped with a circle.  Some Walters reeds from the 1930s were aluminum with no stamped mark.

Not all Paolo Sopranis from that period (and not all Hohners obviously) have those circle-stamped reeds.  Some of the most deluxe early Hohner clubs (maybe ca 1928- 1930?, perhaps the earliest models of the clubs?), have lovely aluminum-framed steel reeds with no stamp (neither H nor circle nor "HOHNER"). I've seen those in a small 3-voice Club and in a 4 voice that looks intermediate between Modell 234 and Modell 235.  As triskel knows, later in the 1930s, some of the deluxe Hohner Clubs and 3-4 voice Double Rays were made with aluminum-framed reeds with "HOHNER" stamped on each.

I'm not sure all these reeds with the circular stamp were made in the same place.  However, I tend to agree with Hasse that reeds that look like his often show nice response and tone in diatonic accordions, when found in good condition.

PG

*
http://forum.melodeon.net/index.php/topic,5706.msg79691.html#msg79691

**
Here are some relatively early Dallapes whose reeds can be seen to be aluminum-framed:
number 2087:
http://ancientpoint.com/inf/98263-antique_1900_button_accordion_famous_cav___m___dallape__figlio_stradella_italy.html

number 3091:
http://www.teknofisa.com/gallery_dett.php?id=11


« Last Edit: October 21, 2013, 11:03:52 PM by pgroff »
Logged

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Earliest Al reedplates - when?
« Reply #4 on: October 22, 2013, 12:21:48 AM »

While it doesn't add much to the above, I thought I'd add: I have several accordions from Hohner and Koch, built between 1920 and 1925, that use steel tongues with aluminum frames. The earliest button accordion I have with alu frames is a Hohner that came with a receipt of purchase dated 1921. There are no markings on the reed plates.

I think asking "when" the switch occurred is a good question, but another question is "why" so many manufacturers switched from zinc to aluminum. So, more questions I've always had:

1) How did the idea matriculate through the industry? Can aluminum reed plates be traced to a single manufacturer, a group of them working together, or was the idea was being pursued by several companies at once? Did it spread through one company absorbing another? Was the technology stolen? Did a purveyor of the alloy sell his product to the manufacturers, one by one? I agree that the manufacture of zinc and alu frames does overlap, and that this occurs across numerous companies.

2) What was the reason for the switch from zinc to aluminum? Was the issue weight? If so, what made lighter accordions so attractive? Were manufacturers trying to keep their shipping expenses down? Was weight more of a concern for playability/handling?

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Earliest Al reedplates - when?
« Reply #5 on: October 22, 2013, 12:53:11 AM »

Hi Christopher,

I suspect there is documentation about these features and the reason for their adoption in the promotional literature of the time.  I haven't gotten into that extensively, but there are accordion museums that have a lot of those documents.

Just IMO, I think that weight must have been a factor, especially on the bass side.  Maybe its significant that most (all?) the fancy Preciosas that I've seen are zinc on the melody side, but aluminum on the bass side. Brass and zinc plates really are much heavier.

PG
Logged

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Earliest Al reedplates - when?
« Reply #6 on: October 22, 2013, 04:22:03 AM »

If the documentation exists (promotional materials, correspondence, etc.), then it's a thesis for another day. Seriously!  (:) In the meantime I could begin compiling a list of those museums. I'm speaking like a true librarian, here.  ::)

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Earliest Al reedplates - when?
« Reply #7 on: October 22, 2013, 03:01:06 PM »

The reeds that Hasse shows, on aluminum plates and with a circular stamp (partly obscured by the notch in his case) look similar to reeds I've seen in various Italian and german diatonic boxes that I believe date from the 1920s to 1930s, including Settimio Soprani, Paolo Soprani, Ploner, and Globe Gold Medal Professional Deluxe. Some 1930s Walters also have been found to have aluminum reeds with a similar stamp. It's possible that those reeds when found in Walters are re-purposed reeds, but if so they are very clean as found in the Walters where I've seen them.   

I'm not sure all these reeds with the circular stamp were made in the same place. 

I'd also doubt that these reeds with the circular stamp were all made in the same place, but it's a mark that's maybe mainly associated with the German reed makers Gebrüder Dix of Gera - whose famous zinc-plate reeds are now being made again (with the O mark) by Harmonikas Louny.

You'll find Dix reeds in many instruments (often with a badge on the outside to say so) and in some surprising ones from the Second World War era - like French Maugein accordions (I've had one with them), or Alfred Arnold bandoneons - because (I've been told) they were the only company licensed to make reeds in Nazi-occupied Europe.

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Earliest Al reedplates - when?
« Reply #8 on: October 22, 2013, 03:22:47 PM »

I am enjoying this thread. Tracking reedplate material across the years would be an amazing thing to look in to. Interesting also to look at why different materials were used... I'm still not entirely sure of the real difference between zinc, aluminium and brass.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Earliest Al reedplates - when?
« Reply #9 on: October 22, 2013, 03:34:49 PM »

Thanks triskel,

I remember you answered my question about those circle-stamped reeds a couple of years ago.

Returning to the reedplate materials, early use of aluminum-framed reeds by Dallape, and the issue of weight.   I've recently seen photos of a couple of small Dallapes that were sold in England by Vickers.  Vickers of course was known for selling English-made concertinas including Jeffries (and Jeffries-stamped instruments of debatable origin, at least some of which were described by Vickers themselves as "Jeffries copies"). Since Vickers specialized in instruments with high quality reeds, maybe it's significant that these Dallape "Real Italian Accordions" that they sold had steel reeds on brass plates -- but in at least one case, with the bass-side reeds on aluminum plates.

PG
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Earliest Al reedplates - when?
« Reply #10 on: October 23, 2013, 12:19:53 AM »

I think asking "when" the switch occurred is a good question...

Though the answer may be "over a period of almost 50 years between c.1910 and c.1955"

Quote
... but another question is "why" so many manufacturers switched from zinc to aluminum.

Fashion/availability/expediency/cost/novelty probably all had their parts to play, over the years.

Quote
What was the reason for the switch from zinc to aluminum? Was the issue weight? If so, what made lighter accordions so attractive? Were manufacturers trying to keep their shipping expenses down? Was weight more of a concern for playability/handling?

The arrival of Duralmin (c.1910) as a new material coincided with the "arrival" of the Deiro brothers and the coming of a demand for increasingly larger and more complicated "concert" accordions for artists like them. It made it possible for the pioneering Guerrini Company (in San Francisco), who built the piano accordions of both the (warring) brothers Guido and Pietro Deiro, to make such instruments of a more acceptable weight and was probably a major factor in the coming of the "piano accordion boom."

But the use of aluminium was not limited to the reedframes, the same Guerrini catalogue that I mentioned previously (which I now think may even be as early as 1918, based on internal evidence) states:

     "To obtain greater lightness and to come more closely to perfection, aluminum is extensively used in the interior detail of the instruments.

     Aluminum, likewise, forms the reed plates ...
"

I'm speaking like a true librarian, here.  ::)

I used to be one, I hope it doesn't show too much...   :|bl

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Earliest Al reedplates - when?
« Reply #11 on: October 23, 2013, 12:47:50 AM »

I think asking "when" the switch occurred is a good question...

Though the answer may be "over a period of almost 50 years between c.1910 and c.1955"

Quote
... but another question is "why" so many manufacturers switched from zinc to aluminum.

Fashion/availability/expediency/cost/novelty probably all had their parts to play, over the years.

Quote
What was the reason for the switch from zinc to aluminum? Was the issue weight? If so, what made lighter accordions so attractive? Were manufacturers trying to keep their shipping expenses down? Was weight more of a concern for playability/handling?

The arrival of Duralmin (c.1910) as a new material coincided with the "arrival" of the Deiro brothers and the coming of a demand for increasingly larger and more complicated "concert" accordions for artists like them. It made it possible for the pioneering Guerrini Company (in San Francisco), who built the piano accordions of both the (warring) brothers Guido and Pietro Deiro, to make such instruments of a more acceptable weight and was probably a major factor in the coming of the "piano accordion boom."

But the use of aluminium was not limited to the reedframes, the same Guerrini catalogue that I mentioned previously (which I now think may even be as early as 1918, based on internal evidence) states:

     "To obtain greater lightness and to come more closely to perfection, aluminum is extensively used in the interior detail of the instruments.

     Aluminum, likewise, forms the reed plates ...
"



Indeed, there's a lot of aluminum in the early Dallapes too, even for the grilles / pallet covers (where Guerrinis that I've had usually avoided this). 

Later this week I'll have access to my early Guerrini catalogue and that very early Guerrini chromatic box, illustrated in the thread I linked above.*  Maybe the catalogue is the same as the one you have, since I also think mine is from the late teens of the last century.  The accordion I think is older, possibly pre-earthquake.  So it will be interesting to check them again.

PG

*
http://forum.melodeon.net/index.php/topic,5706.msg79691.html#msg79691
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Earliest Al reedplates - when?
« Reply #12 on: October 23, 2013, 12:57:35 AM »

Returning to the reedplate materials, early use of aluminum-framed reeds by Dallape, and the issue of weight.   I've recently seen photos of a couple of small Dallapes that were sold in England by Vickers ... Since Vickers specialized in instruments with high quality reeds, maybe it's significant that these Dallape "Real Italian Accordions" that they sold had steel reeds on brass plates -- but in at least one case, with the bass-side reeds on aluminum plates.

Paul,

I've had a few older Dallapes over the years, but I only have one at present, a 2-row C/C# "Cromatique" model that I'd reckon is from the early 1920s. Coincidentally (though it was probably a factor in my buying it) it's one that was sold by Vickers too, and it has aluminium reed plates in both ends, as well as an aluminium grille. I also have a larger instrument in C/C#, with 48 Stradella bass (which came to me from Scotland and may have inspired the later Hohner "Organola" of similar specification, like Jimmy Shand played for a while in the mid '30s) by their fellow Stradella makers Ditta Salas, which has aluminium plates in both ends and is stamped on the reed blocks with the date "9 NOV 1928" (something very helpful that Guerrini did too - if only they'd all done it!) So that's two from Stradella.

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Earliest Al reedplates - when?
« Reply #13 on: October 23, 2013, 02:39:38 AM »

... a 2-row C/C# "Cromatique" model that I'd reckon is from the early 1920s. Coincidentally (though it was probably a factor in my buying it) it's one that was sold by Vickers too, and it has aluminium reed plates in both ends, as well as an aluminium grille.

Actually, I now think it might be a few years earlier because (apart from having a diatonic bass, not Stradella) it's virtually the same as the one that James Brown's son is holding in this photo taken with his father (c.1914):


James Brown died (as a result of having been gassed in 1916) on 10 October 1919, at Edinburgh Royal Infirmary.

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Earliest Al reedplates - when?
« Reply #14 on: October 23, 2013, 03:51:36 AM »

Here are pics of an early 1900's Hohner one row key of E box with mixed zinc and aluminum plates with square stamp on both. Instrument is currently for sale on ebay with more pictures (item#281189606222). I am keeping a spreadsheet with data on the boxes restored including the reedplate material and marks. 120 and climbing:)
Logged
too many boxes...please buy one, or two, or

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Earliest Al reedplates - when?
« Reply #15 on: October 23, 2013, 04:04:33 AM »

This undisturbed reedblock from a Hohner Pokerwork with plastic valves has mixed aluminum/zinc with the H stamp.
Logged
too many boxes...please buy one, or two, or

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Earliest Al reedplates - when?
« Reply #16 on: October 23, 2013, 07:27:27 AM »

Just to add to the sauce...the circle stamped reeds were also found in the accordions sold under the name "Supertone" in the USA.  The photo posted by Hasse of the left end of the old melodeon looks very much like the form of the older Supertones, especially the Hohner-like corners and the marquetry. The reeds in my Supertone had zinc plates, however, but they were lovely sounding. Still are, I hope  (:)
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Earliest Al reedplates - when?
« Reply #17 on: October 23, 2013, 10:39:29 AM »

... a 2-row C/C# "Cromatique" model that I'd reckon is from the early 1920s. Coincidentally (though it was probably a factor in my buying it) it's one that was sold by Vickers too, and it has aluminium reed plates in both ends, as well as an aluminium grille.

Actually, I now think it might be a few years earlier because (apart from having a diatonic bass, not Stradella) it's virtually the same as the one that James Brown's son is holding in this photo taken with his father (c.1914):


James Brown died (as a result of having been gassed in 1916) on 10 October 1919, at Edinburgh Royal Infirmary.

Hi Stephen, 

The small Dallape held by the son in that photo is a very similar model in almost all details (size, keyboard shape, button number on both sides, most of the labeling) to one of the Vickers-stamped instruments that appears from the photos I've seen to have brass plates on the right, aluminum plates on the left:

http://fulbrightit.com/squeezebox/?page_id=418

PG
« Last Edit: October 27, 2013, 01:03:06 AM by pgroff »
Logged

ACE

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 535
Re: Earliest Al reedplates - when?
« Reply #18 on: October 23, 2013, 01:43:31 PM »

Weird how things turn out. When these zinc, ally, mazak, duralumin plates were diecast they had to be 'fettled' to get rid of the flash and mould marks. Sorry back to subject.
Logged
Paddy Clancy, paddlewheel gob iron cheepo g/d anglo

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Earliest Al reedplates - when?
« Reply #19 on: October 23, 2013, 02:04:32 PM »

Reed plate blanks are virtually always stamped out of a sheet, the only exceptions I see are bass and helicon bass reeds where the blanks are often die cast.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal