Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Velcro adjusting bass str@p  (Read 3365 times)

0 Members and 1 Guest are viewing this topic.

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Velcro adjusting bass str@p
« on: October 25, 2013, 08:08:33 PM »

Getting set to place an order with CGM for some parts, and was noticing the nice selection of bass str@ps. I would like to make the str@p on my pre-Corona adjustable, but not sure I want to experiment with the hardware (the recessed knurled-nut, volume control variety).  I have had that setup on one other box, and it was great, but it was factory installed. Not sure I want to perform the surgery. Up to now, I have been using a plain leather str@p with an automotive seat-belt pad for comfort. The velcro model looks like a great idea. Anyone out there use one of these? Would appreciate any comments pro or con. Best regards, .....Forrest

Edited to eliminate a 'forbidden' word
Logged

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Velcro adjusting bass str@p
« Reply #1 on: October 25, 2013, 08:17:01 PM »

Bought one for my Liliput, but it's not fitted yet - project has been on the back burner for a while. But it looks promising ;D
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Velcro adjusting bass str@p
« Reply #2 on: October 25, 2013, 08:37:13 PM »

They work very well.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: Velcro adjusting bass str@p
« Reply #3 on: October 25, 2013, 08:59:27 PM »

I have one on my Hohner Double Ray. The adjustment and comfort are fine, but the strap is appreciably thicker than the simple one, so the standard feet are too short. It really needs new, longer ones. Maybe someday; meanwhile it wobbles a bit when set down.
Logged

tekyinblack

  • Good talker
  • **
  • Offline Offline
  • Posts: 64
Re: Velcro adjusting bass str@p
« Reply #4 on: October 25, 2013, 10:26:11 PM »

I got one from CGM and it's very smart and effective, but I can see that getting the wrong length could be a problem, mine is only just right.
Suggest you phone and have a chat about the length.
Logged
Castagnari Sander D/G, Hohner Club III D/G, Hohner Liliput Eb/Bb, Hohner Club II C/F

MartinW

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 202
Re: Velcro adjusting bass str@p
« Reply #5 on: October 25, 2013, 11:56:29 PM »

I have put them on a couple of old Hohners. They work very well.
Martin
Logged

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: Velcro adjusting bass str@p
« Reply #6 on: October 26, 2013, 10:22:36 AM »

I've put them on both a pokerwork and a pressed wood and they work really well. Adjustable and comfortable!
And easy to fit!
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Velcro adjusting bass str@p
« Reply #7 on: October 26, 2013, 10:39:42 AM »

Make sure you get the Italian style end caps to go with them, makes a neater and stronger job.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Velcro adjusting bass str@p
« Reply #8 on: October 26, 2013, 11:57:43 AM »

I've put them on both a pokerwork and a pressed wood and they work really well. Adjustable and comfortable!
And easy to fit!
Do you remember what length you bought?
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Velcro adjusting bass str@p
« Reply #9 on: October 26, 2013, 12:10:07 PM »

Measure the length of the old strap, get new one the same.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Velcro adjusting bass str@p
« Reply #10 on: October 26, 2013, 12:18:21 PM »

I have a thing about which way up these straps should be mounted. I strongly believe the metal loop bit should be on the chin end of the box so that the strap loops downwards. This because the open end of the strap will then point down and be less likely to get caught on stuff and become undone.

Castagnari seem to disagree with me  :o

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Velcro adjusting bass str@p
« Reply #11 on: October 26, 2013, 01:49:14 PM »

I will say a prayer for them tonight  ;)
Logged
  _       _    _      _ 

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Velcro adjusting bass str@p
« Reply #12 on: October 26, 2013, 01:56:04 PM »

I prefer them the other way up because the free end is easier to reach with your right hand when making adjustments.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Velcro adjusting bass str@p
« Reply #13 on: October 26, 2013, 04:17:12 PM »

Had one on a Lilly and thought it was great, as Theo says easy to adjust if the right way up.  I never caught it on anything and I'm notorious for my cavalier attitude to my boxes.  Only problem for the small Hohners is that there isn't a strap narrow enough to fit.  Perhaps one day I'll find some suitable leather to make one...

Rob.
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Velcro adjusting bass str@p
« Reply #14 on: October 27, 2013, 10:41:50 AM »

Only problem for the small Hohners is that there isn't a strap narrow enough to fit.  Perhaps one day I'll find some suitable leather to make one...

Rob.

I have one on my Liliput and it's only a little wider than the original where it fastens to the body, the padded bit in the middle is a little wider though but it's not a problem. Like Bill Young my only problem is that the feet are way too short for the thickness of the strap so I have to leave it in an open bag for support.

Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Velcro adjusting bass str@p
« Reply #15 on: October 27, 2013, 10:52:46 AM »

Ah, I see the Liliput has an external fastening for the strap.  On the Preciosa, it is let in through the case and offset from centre - only 25mm wide.  I'll have to either trim the ends of a commercial one or adapt a belt.

Rob.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Velcro adjusting bass str@p
« Reply #16 on: October 27, 2013, 06:16:57 PM »

The straps are not difficult to make if you learn how to do leather stitching. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Velcro adjusting bass str@p
« Reply #17 on: October 27, 2013, 07:23:30 PM »

The straps are not difficult to make if you learn how to do leather stitching.

@ Theo: I understand there are some courses available where one can also make their own melodeon as well!  ;D  I certainly will get the end-plates, though. And I will put the strap on right way 'round! (aside): why won't the post work using the word 'strap'? Does this word have a derogatory connotation in the UK?

@ tallship: Thanks for the photo! A bit more descriptive than Charlie's.

@ all: Very grateful for the comments....I am definitely ordering one of these. Best wishes, Forrest
« Last Edit: October 27, 2013, 07:25:16 PM by forrest »
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal