Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Shops in the States for Repiar and Restorations  (Read 7025 times)

0 Members and 1 Guest are viewing this topic.

AlexCJones

  • Good talker
  • **
  • Offline Offline
  • Posts: 89
  • 3 row Hohner GCF 16 Bass
Shops in the States for Repiar and Restorations
« on: November 05, 2013, 04:41:26 AM »

In the Chicago area, you can easily find people to repair piano accordions, but not the case when I show them one of my antique diatonics.  Some will accept it for repair, then not do a great job on it, but the honest ones will tell me right away to take it somewhere else.

I did find the best ever squeezebox repair and restoration specialist in the area of the West Shore of Lake Michigan (closer to Milwaukee), but he now has a big backlog, which means his turn-around time might be a little slow right now.  (He also makes accordions, and I assume that he has service contracts for the ones he makes).

So, I might have to send some of my squeezeboxes elsewhere for restoration, but I don't want to send them overseas, and I am in the States.

On the Shops and Repairers page are these 3 based in the U.S.:
www.buttonbox.com
www.smythesaccordioncenter.com
www.expertaccordionrepair.com

There are also these other 3 U.S. located ones, I have found on the web:
www.libertybellows.com
http://accordiondoc.home.mindspring.com
www.monarchaccordions.com/

So, I was wondering if anyone could recommend any or which ones are better for restoring old ones, and which ones are better for quicker repairs.  Maybe someone might know something about the last three listed above.

Maybe I can distribute the work among several repair shops.

Basically it is 4 boxes, and two of them are the really old kind with the big visible pallets.  They look like the "Cajun" type but with 2 rows.  For those two boxes, I have 4 additional ones that can be used for parts.

The other two boxes are closer to being playable and are not quite as old.

Thanks.
Logged

ButtonBox21

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 106
Re: Shops in the States for Repiar and Restorations
« Reply #1 on: November 05, 2013, 12:29:54 PM »

You might want to try Emillio Accordions in Stamford CT. Here is the website: www.emilioaccordions.com He is a Dino Baffetti and Bugari dealer and also repairs both piano and button accordios. :||: :|||:
Logged
Keep on Squeezin'

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Re: Shops in the States for Repiar and Restorations
« Reply #2 on: November 05, 2013, 12:37:30 PM »

Liberty Bellows

I've dealt with Liberty Bellows. They are very fair when it comes to buying/selling, are willing to barter and negotiate and have a good supply of diatonics.
I think they deal more with PAs though and I found that their repair and maintenance costs are a bit higher than others.

Button Box

I have only visited the Button Box so I don't have any experience with they as a shop but I know the people are very friendly there.
They have a great supply of diatonic accordions and concertinas and I think they're the opposite as mentioned above and specialize more with button accordions and less with PAs.

Smythes

No experience. Bought a used B/C box and it had a Smythes badge on it. Good box but I play C#/D now.



Also, one to add. In Florida http://www.irishdancemaster.com/accordion.html
I haven't dealt with him but I've heard good things and am considering shipping my box there for a tune-up.
« Last Edit: November 05, 2013, 12:40:17 PM by deltasalmon »
Logged
Sean McGinnis
Bordentown City, NJ, USA

AlexCJones

  • Good talker
  • **
  • Offline Offline
  • Posts: 89
  • 3 row Hohner GCF 16 Bass
Re: Shops in the States for Repiar and Restorations
« Reply #3 on: November 06, 2013, 04:33:15 AM »

Here are the boxes:

Hohner 2 Row 8 bass A/D, playable but can use new padding to reduce the clip-clop sound.  Maybe some cleaning too.



Venezia 3 row F/Bb/Eb 18 bass.

All of the notes and basses are playable, and sound in-tune, but it needs work.  The most serious part is the metal keyboard top is misaligned with the buttons, so that the buttons either get stuck or break off when they get snagged by the edge of the misaligned button-hole.  This might have happened when it was shipped to me.  It can use some cleaning too.  Also, I would like one pair of the basses changed, so they give me Db and Db major on the push and Ab and Ab Major on the pull instead of giving me Db and Db Major in both directions.  There is already one pair that gives Ab and Ab Major on the push, but I cannot believe that they would not be available on the pull.

Then I have this 2 Row 6 bass E/A "Breadbox" type.

The pallets need to be repadded, and there might be some more work to make it playable, and "as good as new".


Then I have these 2 2 Row 4 bass Bb/Eb "Breadbox" types, with the old exposed button levers.

I would like only one back in playable condition, and the other can be used for parts.  And the deeper the basses sound, the better.


Then there are 3 breadbox junkers, to be used for parts for the previously mentioned breadbox ones.  Two of these are A/D with exposed levers, and one is a B/E (H/E), with the newer closed keyboard.
I was not able to post a 5th image, because of a 4 attachment limit.
« Last Edit: November 06, 2013, 04:42:10 AM by AlexCJones »
Logged

AlexCJones

  • Good talker
  • **
  • Offline Offline
  • Posts: 89
  • 3 row Hohner GCF 16 Bass
Re: Shops in the States for Repiar and Restorations
« Reply #4 on: November 06, 2013, 04:44:22 AM »

Okay, here is a photo of the three junkers to be used for parts, because I believe they are beyond repair.

Those bags on the table in front contain parts
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Shops in the States for Repiar and Restorations
« Reply #5 on: November 06, 2013, 09:04:18 AM »

Here's three more Junkers  ;)

 
Logged
  _       _    _      _ 

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Shops in the States for Repiar and Restorations
« Reply #6 on: November 06, 2013, 12:50:31 PM »

Here's three more Junkers  ;)

A junket of them even?  ::)

Though they're all 1934 Junkers Chris, built (for South African Airways) at Dessau in Saxony-Anhalt, whilst Alex's 3 junkers are more like 1904 (St. Louis Gold Medal) models, made at Trossingen in Baden-Württemberg - factories that were 492 km apart, as the Ju 52 flies, or 612 km by car...  ;)

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Shops in the States for Repiar and Restorations
« Reply #7 on: November 06, 2013, 01:39:18 PM »

Hohner 2 Row 8 bass A/D, playable but can use new padding to reduce the clip-clop sound.  Maybe some cleaning too.

I've got the single-row version of this one, in D, that I've had for something like 30 years, and it sounds gorgeous. I got it in its original cardboard box, from "under the flyover" in London's Portobello Road Market, and I've put more wear on it, in that time, than it got in the previous 80 years of its existence.

I got Nielsen to tune it for me then (the poor man never new what "relic" I'd be bringing him next - nobody bothered with such ancient boxes in those days), but that was a saga in itself because of the German half-semitone-flat-pitch D it was tuned to, which he assumed was English half-semitone-sharp-pitch C# and accordingly tuned down at first... :o

Did they tune them to German pitch, or American, for the US market in the early 1900s?

Quote
Then I have this 2 Row 6 bass E/A "Breadbox" type.


Lovely box, but I never heard that expression, "Breadbox" type, before.

AlexCJones

  • Good talker
  • **
  • Offline Offline
  • Posts: 89
  • 3 row Hohner GCF 16 Bass
Re: Shops in the States for Repiar and Restorations
« Reply #8 on: November 07, 2013, 03:53:39 AM »

Here's three more Junkers  ;)

A junket of them even?  ::)

Though they're all 1934 Junkers Chris, built (for South African Airways) at Dessau in Saxony-Anhalt, whilst Alex's 3 junkers are more like 1904 (St. Louis Gold Medal) models, made at Trossingen in Baden-Württemberg - factories that were 492 km apart, as the Ju 52 flies, or 612 km by car...  ;)
The first time I saw one of those was on my first trip to the Wright-Patterson Air Force Museum.  I thought it was funny that the planes were called "Junkers" and the cockpit window was made out of a whole lot of flat glass pieces.  When I told a friend, who happened to be taking German, he corrected my pronunciation.
Logged

AlexCJones

  • Good talker
  • **
  • Offline Offline
  • Posts: 89
  • 3 row Hohner GCF 16 Bass
Re: Shops in the States for Repiar and Restorations
« Reply #9 on: November 07, 2013, 04:18:41 AM »


Did they tune them to German pitch, or American, for the US market in the early 1900s?
American pitch.  Well, most of the Hohners.  At least the notes that do play sound very close to my pitch pipe. Well, actually the A/D one is a tiny bit flat.  So I assumed that it was tuned to A = 438 instead of A= 440.  Would that be German?  It is not flat enough to be annoying, like a Scholer concertina, which can be either too flat or too sharp.

But anyway the ones I keep calling "Breadbox" seem to be in tune close enough to my pitch pipe.

Quote
Lovely box, but I never heard that expression, "Breadbox" type, before.
I made up that term, because someone I new used to keep bread in a container that looked a lot like that.  But now that I think about it, my grandmother stored bread in a container that was very Art-Deco in design, so her bread box actually looked more like a Hohner Corso!  Maybe "Breadbox" is not the best nickname.

Hmm, what does it look like?  A Jeep grill?  Okay, that would be misleading, since an actual grill is what these boxes do not have.  How about Pallet-faced?  Maybe someone can come up with something that is more appropriate or maybe a name that is just simply funny and memorable.  Maybe there is already a German word for them that has an fun sound to it.
Logged

Todd D

  • Member
  • *
  • Offline Offline
  • Posts: 10
Re: Shops in the States for Repiar and Restorations
« Reply #10 on: November 08, 2013, 09:55:22 AM »

That's a nice collection of melodeons. Most likely the shop you need to do them in a fashion they deserve has a backlog of projects. I took an older Hohner 2815 to Smythe's last winter and he told me up front it would be three months. That is exactly what it took. Once they began the work they kept close contact with me and went over what they thought it needed and what these particular improvements should cost. They let me know how the different repairs were going as they made them. When finished I received a great box. When the " works all done this fall", i'm headed back with another project and feel confident that its going to be a great job
Logged

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Shops in the States for Repiar and Restorations
« Reply #11 on: November 08, 2013, 01:33:29 PM »

Here's three more Junkers  ;)

 

Thank the lord, he didn't mention Fokkers!

John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Shops in the States for Repiar and Restorations
« Reply #12 on: November 08, 2013, 05:47:39 PM »

Did they tune them to German pitch, or American, for the US market in the early 1900s?
American pitch.  Well, most of the Hohners.  At least the notes that do play sound very close to my pitch pipe. Well, actually the A/D one is a tiny bit flat.  So I assumed that it was tuned to A = 438 instead of A= 440.  Would that be German?

Probably A=435 then, a common pitch standard at the time, known variously as "Diapason Normal", "Low Pitch", "Continental" or "Paris Opera Pitch". Chickering in Boston tuned his pianos to it, whilst Steinway in New York used a tuning fork which produced an exceptionally "High Pitch" A=457.2 (67 cents sharp of A=440!) - which would be only symptomatic of the huge confusion over pitch at the time...  ???

But numerous old German-made free-reed instruments (like my single-row Hohner) seem to have been made around half-a-semitone flat of our "modern" A=440 pitch, so something around A=427.5, and I've had some old German flutes that are as flat.

Edited to add: So that's a spread of more than a semitone in pitch - no wonder Nielsen got it wrong the first time and tuned my single-row to C#, instead of D.

... I never heard that expression, "Breadbox" type, before.
Maybe there is already a German word for them that has an fun sound to it.

Maybe there is, but I've only ever heard them described in German as a "Deutsche Harmonika" (German accordion), as opposed to a "Wiener Harmonika" (Viennese/Vienna accordion) like your 8-bass one.

tedrick

  • Guest
Re: Shops in the States for Repiar and Restorations
« Reply #13 on: November 08, 2013, 07:03:44 PM »

I've had good experiences with Michael Usui down at Dancemaster accordions in Florida - quick turn around. Excellent tuning and repair-
Logged

AlexCJones

  • Good talker
  • **
  • Offline Offline
  • Posts: 89
  • 3 row Hohner GCF 16 Bass
Re: Shops in the States for Repiar and Restorations
« Reply #14 on: November 27, 2013, 03:41:53 AM »

Did they tune them to German pitch, or American, for the US market in the early 1900s?
American pitch.  Well, most of the Hohners.  At least the notes that do play sound very close to my pitch pipe. Well, actually the A/D one is a tiny bit flat.  So I assumed that it was tuned to A = 438 instead of A= 440.  Would that be German?

Probably A=435 then, a common pitch standard at the time, known variously as "Diapason Normal", "Low Pitch", "Continental" or "Paris Opera Pitch". Chickering in Boston tuned his pianos to it, whilst Steinway in New York used a tuning fork which produced an exceptionally "High Pitch" A=457.2 (67 cents sharp of A=440!) - which would be only symptomatic of the huge confusion over pitch at the time...  ???
Yes, it must be at about A=435.  For some reason I thought Low Continental was A=438, but I looked it up and it is 435.  I don't know where I got 438 from.  I think I have tuner somewhere that has the option of 438 for some reason.  A quarter of a semitone lower would be 433.69, and it does not sound that low.  435 is low enough to hear when comparing but still tolerable with instruments tuned to 440.  As for Steinway going the other way, that sounds like it would be enough to be incompatible playing along with a 435 tuned Chickering.  I wonder if Steinway did that on purpose.  Louis Moreau Gottschalk preferred Chickerings.

Quote
But numerous old German-made free-reed instruments (like my single-row Hohner) seem to have been made around half-a-semitone flat of our "modern" A=440 pitch, so something around A=427.5, and I've had some old German flutes that are as flat.

Edited to add: So that's a spread of more than a semitone in pitch - no wonder Nielsen got it wrong the first time and tuned my single-row to C#, instead of D.

... I never heard that expression, "Breadbox" type, before.
Maybe there is already a German word for them that has an fun sound to it.

Maybe there is, but I've only ever heard them described in German as a "Deutsche Harmonika" (German accordion), as opposed to a "Wiener Harmonika" (Viennese/Vienna accordion) like your 8-bass one.
Tuning pains:
The German Scholer concertinas are always tuned so each one is in tune with itself, but there seemed to be a lack of any standard between any two of their squeezeboxes.  I had a D/A that was tune sharp so it was almost halfway between being a D/A and an Eb/Bb

Names:
The Sears catalogs from the early 20th century as well as the Hohner catalogs use the terms "German" for the valve-faced ones and "Vienna/Italian" for the ones like my 8 bass ones as well.  But I consider these Vienna boxes more dignified in appearance, so I would not want to use the English pronunciation of "Wiener Harmonica".  For the "German" or "Deutsche Harmonika" ones, I think someone can come up with something funnier.  They deserve a funnier name.  They are just more industrial looking and less elegant than the Vienna style.
Logged

AlexCJones

  • Good talker
  • **
  • Offline Offline
  • Posts: 89
  • 3 row Hohner GCF 16 Bass
Re: Shops in the States for Repiar and Restorations
« Reply #15 on: November 27, 2013, 03:43:01 AM »

I've had good experiences with Michael Usui down at Dancemaster accordions in Florida - quick turn around. Excellent tuning and repair-
Thanks.  I am going to contact a few repair shops soon, and I will contact him too.
Logged

AlexCJones

  • Good talker
  • **
  • Offline Offline
  • Posts: 89
  • 3 row Hohner GCF 16 Bass
Re: Shops in the States for Repiar and Restorations
« Reply #16 on: November 30, 2013, 08:07:11 PM »

Update.
Last weekend, I drove up to the best accordion place in the midwest to pick up my 3 row which had been there for over a year (see my avatar).  I also brought with me the German Style Hohner boxes (the ones I called "Bread box Hohners" earlier).  I figure that I don't need these repaired too quickly, so I don't mind if they spend a year or more at his shop.

He now has the 3 junk ones, as well as the 2 B-flat/E-flat ones, and he said that he will be able to restore 1 B-flat/E-flat box using parts from the others, as I requested for 3 figures.

He also said he can restore the E/A one too, but that will cost over $1000 to restore.

I am referring to this box:


This instrument is in worse shape that when I bought it due to my negligence.  It is such a nice looking instrument, and I did not have room left in my glass-doored cabinet, so I had it up on top of the shelves.  It did move around a little until eventually it was on top of the shelves in a spot near a window and above a radiator! D'OH!  I guess there are worst places for it but most of those place are not indoors or outside of ovens or boilers.  I assume that most of you would know why a top shelf above a radiator is a bad place, but for those who don't know yet:

Too much heat and dry air can be a bad thing.

Cracks have formed in the front soundboard.*

If it is in your power, you should do what you can to prevent this from happening to other instruments, even if they belong to your enemies or least favorite relatives.

I am one of those people who does not like the idea of display-only musical instruments.  So, I have to decide whether to keep it and pay the $1000+ to have it restored when I can justify spending that much on an limited instrument, or selling it to someone else who is either already at that point or who can restore it himself.

*You can see part of the worst crack in the photo on the left


Logged

AlexCJones

  • Good talker
  • **
  • Offline Offline
  • Posts: 89
  • 3 row Hohner GCF 16 Bass
Re: Shops in the States for Repiar and Restorations
« Reply #17 on: December 04, 2013, 02:52:19 AM »

One estimate given for repairing he 18-bass compact 3-row Venezia is $3000.

Maybe I should look for another one like it in better shape and hold on to this one for parts. 
I have actually seen pictures of other instruments like this before, even for sale on this site.

Logged

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Shops in the States for Repiar and Restorations
« Reply #18 on: December 04, 2013, 04:05:01 AM »

I'm in western ny and have a shop for tuning and repairing. The AD Hohner you have I sold several years ago. Was it to you? It is sitting on my braided hall rug in your picture so I assume so. I had replaced the leather valves with plastic film type and tuned it quite dry. I had left the original leather seats for the reedplates instead of converting to wax. It had brass reeds. I am attaching a picture of the treble reeds (on the same braided rug;)
Logged
too many boxes...please buy one, or two, or

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Shops in the States for Repiar and Restorations
« Reply #19 on: December 04, 2013, 04:34:47 AM »

That AD project was early in my MADness. I have tuned/restored 50 or so boxes since then so I believe my skills have improved. There are 10 or 11 for sale on ebay at the moment, most with demo videos highlighting the tuning. I am a university faculty teacher/tutor for deaf & hard of hearing engineering students by day (Rochester Institute of Technology) and a serious button accordion hobbyist by night and weekends. I'm sure I could  get your Venezia up and running for a lot less than $3000. The AD box should need very little. I didn't repad the pallets and that would be a logical next step. Has the tuning held well? I love the sound of the brass reeds but I'm interested in knowing if they stay in tune as long as steel reeds. I am attaching a picture of 6 boxes similar to yours I currently have in the shop. Contact me if you wish to discuss further.
Logged
too many boxes...please buy one, or two, or
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal