Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Reed size v pitch  (Read 2000 times)

0 Members and 1 Guest are viewing this topic.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Reed size v pitch
« on: November 13, 2013, 08:19:01 AM »

Hi - I've looked but I'm not sure what to search for...
Can anyone point me to a thread which discusses reed size and pitch in the context of how far they can be retuned from their designed pitch range?
I.e. how far can you retune a reed vs get the right reed for the pitch rather than retune...
OR
Anyone care to to say how far a reed can be retuned (is it best to go up or down, what does it do to the quality of the sound)?

tirpous

  • Hero Member
  • *****
  • Online Online
  • Posts: 1403
Re: Reed size v pitch
« Reply #1 on: November 13, 2013, 04:53:44 PM »

I did a quick search on 'converting' and found in this thread...
http://forum.melodeon.net/index.php/topic,13092.msg161051.html#msg161051
... that a semi-tone up or down seems to be a safe bet.

Beyond that probably dépends on the specific reed.   
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Reed size v pitch
« Reply #2 on: November 13, 2013, 05:03:37 PM »

I stand to be corrected by those more expert than I, but as far as I am aware a semitone either way is generally considered no problem, a tone either way do-able (I know it is, because I've done it several times!), and any further than that you're on very thin ice.  I'm not aware that there is any particular advantage or disadvantage in retuning one way or the other, and I can't say I've noticed any deleterious effects on sound quality.  The vast majority of my butchery retuning has been on old Hohner reeds; I have no idea if they are any more or less forgiving than other brands.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Reed size v pitch
« Reply #3 on: November 13, 2013, 11:21:42 PM »

*butchery*  LOL  (:)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed size v pitch
« Reply #4 on: November 13, 2013, 11:27:15 PM »

It varies very much, different makers profile reeds in different ways.  Low reeds can usually go up a tone (or more) by removing tip loading.  High reeds can be difficult to take up even a semitone, but can sometimes go down a tone or more by re-profiling the lower part of the reed.  You just have to give it a try on unimportant reeds to get a feel for how much you can get away with.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Reed size v pitch
« Reply #5 on: November 14, 2013, 09:13:39 AM »

i made an error setting out my gaillard, had an Ab/C helper button in low octave (for chording) but quickly realised it would be much more useful in mid range as a melody helper.  :-\

Gaillard was very good about it, though it probably confirmed his opinion that I had eaten too much British beef. He sent over AFAIR two Bb/C# plates at cost. The covering note made no mention of vaches folles ;) I had them put in by Paul in Cleckheaton.

The half and whole tone tweaks involved went absolutely fine. Have to say that they have a different tone from the "right direction" notes on the main rows, but suspect that relates to chamber size.
« Last Edit: November 14, 2013, 09:15:37 AM by Chris Ryall »
Logged
  _       _    _      _ 

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Reed size v pitch
« Reply #6 on: November 14, 2013, 05:20:02 PM »

Where was it Chris? I am convinced that accidentals at the end of a row will always sound different to their compatriots along the block, because the response of the block changes along its length.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Reed size v pitch
« Reply #7 on: November 15, 2013, 01:00:31 AM »

If you pay for a luthier made melodeon … they make the blocks to optimise the reeds you order.
Logged
  _       _    _      _ 

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Reed size v pitch
« Reply #8 on: November 15, 2013, 01:42:17 PM »

So the point is that a reed in the middle of the block has a similar block coupling to other reeds around it, as well as sympathetic resonance with reeds around it, selected damping from free reed tongues, etc. So the reeds sound similar to those around it, but sound gradually different along the block. If you have a high reed at the end of the block there is a lot more mass, the distance from the strap is different, the pitch of the surrounding reeds is different and so on. All those things you can rectify, and I'm sure that the very best makers do, but it wouldn't be trivial.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Reed size v pitch
« Reply #9 on: November 15, 2013, 02:54:51 PM »

Do you know, there are times when I'm really glad I don't have perfect pitch!   ;D ::) :|glug
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Reed size v pitch
« Reply #10 on: November 15, 2013, 04:15:18 PM »

Nothing to do with perfect pitch! Just timbre of reeds.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal