Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: adding a 3rd voice to an Erica  (Read 5147 times)

0 Members and 1 Guest are viewing this topic.

tedrick

  • Guest
adding a 3rd voice to an Erica
« on: November 16, 2013, 06:36:58 PM »

Hi Everyone -
I have been interested in moving towards a 3 voice MMM for quite some time. I would like as lightweight a box as possible - something along the lines of a Tommy -

How practical is it to modify an Erica to add a 3rd set of reeds?

Would it be worth it? Or would it be easier to just find a 3 voice MMM Corso/Double Ray Deluxe?

Reed
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: adding a 3rd voice to an Erica
« Reply #1 on: November 16, 2013, 06:38:55 PM »

Microbot of this parish is your man.

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: adding a 3rd voice to an Erica
« Reply #2 on: November 16, 2013, 07:42:31 PM »

Thanks Lester ... and Hi Reed!

I am currently half-way through making two MMM Ericas ... but first some background ...

Over the past 2 years I've made a number of standard 2-voice Hohners into 3-voice boxes, including 3 PressedWoods in D/G, 3 Erikas in D/G (the wooden bodied 2.4 row), 3 student 1 Melodeon conversions ... all have been LMM ...

I have also made, this year, one Erica 3-voice - it's also an LMM and is a red Box in C/F with pull-stop to go from LMM to MM, 12 basses with bass end stop to take out the thirds .... it's currently on loan to Ollie King...

You can see a photo and hear it on my soundcloud (with a number of the other 3-voice models listed above) on ...

  https://soundcloud.com/microbot-2

(... there are some twenty recordings on my site and the red Erica is a fair way down the page...)

You can hear the instrument being played far better, by a far better player, on Ollie King's website ... notably this tune, which is quite majestic ...

https://soundcloud.com/olliekingbox/rain-tune

And finally to get to the point .... I am so pleased with this C/F LMM Erica (which was the first Erica I'd 3-voiced), that I am currently building 2 more Erica 3-voices.

....... Both will be MMM... one is for myself (Black 3-voice D/G MMM) and the other for Steven Jones ... (Grey MMM 3-voice C#/D MMM)

On both of these instruments I am not fitting a slider/pullstop to go from MMM to MM (although this would be easy, as with the LMM C/F box). This derives from the much-discussed observation that fixed 3-voice MMM instruments (without slider/stop to go to MM) deliver a fuller sound and better response. Besides, we've all GOT 2-voice boxes we can use if we want that sound - I want to find out just how good a non-slider 3-voice Erica can be.

cheers
 
Mike R


Logged

tedrick

  • Guest
Re: adding a 3rd voice to an Erica
« Reply #3 on: November 16, 2013, 09:19:58 PM »

Hi Mike -
Thanks for your quick reply - I recall now reading about your upgrades and modifications earlier here on the forum. I agree with your point re: a 3 voice without a mechanism - I already have a 2 voice I like, I'm happy to lug it around and switch to a 2nd box when I want that sound -

I'm looking forward to hearing the sound samples out on soundcloud - for some reason they wouldn't play for me from your web site -

How much does your 3 voice Erica weigh?

Thanks!
Reed
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: adding a 3rd voice to an Erica
« Reply #4 on: November 16, 2013, 11:16:23 PM »

I think that a grey Erica in MMM would look fantastic. All the Paolo-ists would be quite taken aback!
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: adding a 3rd voice to an Erica
« Reply #5 on: November 16, 2013, 11:46:34 PM »

I think that a grey Erica in MMM would look fantastic. All the Paolo-ists would be quite taken aback!

Grey is probably my favorite color for Ericas, and not the most common color. I was saving the very original one at left in the pic below for a project such as Mike describes but don't know if I'll get around to it this decade . . .  might consider a trade or attractive offer for it.  The Corona is gone though.

PG
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: adding a 3rd voice to an Erica
« Reply #6 on: November 17, 2013, 05:52:47 AM »

Paul,

What key is the two row and what would be an "attractive" offer?

PM ok.
J
Logged

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: adding a 3rd voice to an Erica
« Reply #7 on: November 17, 2013, 09:27:04 AM »

Mike,
Just curious - presumably they are externally identical?
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: adding a 3rd voice to an Erica
« Reply #8 on: November 17, 2013, 09:55:54 AM »

Hi Reed, Malcolm, Owen and Paul,

I'm not sure of the exact total weight but an Erica treble reedblock+reeds weighs 5 ounces ... count that as the additional weight of the 3rd reedblock and add that to the weight of an original Erica, which is a pretty lightweight box.

yes, they're externally identical. The whole concept was to retain as much of the original instrument and sound as possible.

The original soundboard is removed and a new soundboard (holes already CNC routed) is fitted .... the new soundboard is designed to accommodate the original reedblocks, with the addition of a 3rd reedblock inbetween. The original fingerboard and action are retained ... larger pallets are of course needed.

I'll put a photo up later of the black and grey Erica 3Vs under construction showing the new soundboard...

cheers

Mike R

 
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: adding a 3rd voice to an Erica
« Reply #9 on: November 17, 2013, 04:50:13 PM »

I think that a grey Erica in MMM would look fantastic. All the Paolo-ists would be quite taken aback!

Grey is probably my favorite color for Ericas, and not the most common color. I was saving the very original one at left in the pic below for a project such as Mike describes but don't know if I'll get around to it this decade . . .  might consider a trade or attractive offer for it.  The Corona is gone though.

PG

Gorgeous! And original boxes! /nerd
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: adding a 3rd voice to an Erica
« Reply #10 on: November 17, 2013, 08:00:41 PM »

Interesting thread, especially since I just found 3 blocks from a scrapped Corso lying dangerously close to a beaten-up Erica... I did convert a 2 v. Busilacchio to a 3 voice a few years back, lovely to have that extra swing to the sound:)

What material do you use for soundboards Mike? I would think plywood around 5 mm., but have you ever tried aluminium?
Logged

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: adding a 3rd voice to an Erica
« Reply #11 on: November 17, 2013, 08:32:23 PM »

Hi Lars,

I am using 4mm marine ply. I do not subscribe to the view that the material of the soundboard has no impact on tone and volume ... indeed, quite the contrary.

The density and construction of the soundboard ply in Hohner instruments varies, but in the better instruments I've worked on it tends to be harder and tighter-grained ... thus, I am using a dense hardwood ply (all layers Sapele or Gaboon) - it is not only very hard but lends itself to cutting/routing.

Yes, I considered aluminium but I don't have your experience with Paolos etc to call on ... by erring on the side of harder wood for the soundboard, I considered I might be moving in that direction. At any rate, the red Erica I made, which I describe in the post above (which has the same hardwood soundboard) has a great tone.

I intended to post a photo of the Grey and Black Ericas with their new soundboards this eve, but it will have to wait till tomorrow - I prefer taking photos with decent light!!!

How did you go about making your Busilachio a 3-voice? Hey - I salute a brother in arms!
 
cheers!

Mike R
Logged

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: adding a 3rd voice to an Erica
« Reply #12 on: November 18, 2013, 08:19:00 AM »

Mike,

I've had a lot of Paolos through my hands, but only one with alu soundboard - all the ones I have myself are plywood soundboarded. Not hardwood, but pretty close grained.

For the Busilacchio the original soundboard was damaged by water when I got it, so it was just a matter of placing a few knocks with a hammer, and it came out. Made a new from 5mm model aircraft plywood (birch 5 ply), and glued it in. I did what you descibed, and made a middle block to go between the two original, and added new pallets to the original action.

The reason why I consider alu is just a matter of sound - though I think plywood will sound great, I can't help wonder what alu would sound like. Crisp? Bright? Shrill? I suppose it's a matter of trying it to find out:)

I have a drill press and jigsaw, but no CNC, so I would be making by hand. I recently made a soundboard and blocks for a different box (alu board and walnut/mahogany blocks) with good results to the sound, so I can't help it wonder what it would sound like in an Erica.

Ah, plans, plans. Just need the time now:)
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: adding a 3rd voice to an Erica
« Reply #13 on: November 18, 2013, 09:17:13 AM »

I'm not sure that it is a matter of saying "Alu palletboards will sound like this, ply soundboards will sound like that". There are too many variables. Alu is stiffer for a given mass, so the response of the palletboard will be different. This would include taking less energy out of the reed than a ply soundboard of identical dimensions. The exact affect of this would vary depending on how many reedblocks there are, whether they are glued down, what type of reeds are used and so on. Some alu palletboards would result in an sound unpleasantly shrill and harsh sound, some ply palletboards would result in a stodgy, sluggish sound. But a good maker would be able to get good results with either material. Personally I would use ply.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: adding a 3rd voice to an Erica
« Reply #14 on: November 18, 2013, 02:36:10 PM »

Ukebert,
I base my thoughts only on personal experience, and never in a Hohner. I too prefer the sound of ply for my MMM boxes, but I still think it could be interesting to hear what sound it would produce in an Erica, especially with only slight tremolo. The initial plan was to either use Corso blocks, or make a 3rd block myself, and put them in the usual Hohner way, with felt on the base of the blocks.

Btw, you might know this, or have a theory on it: How would the SIZE of the soundboard effect sound, if at all? I can't help wonder that the small size of an Erica might reduce some lower frequency harmonies, especially with alu soundboard.
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: adding a 3rd voice to an Erica
« Reply #15 on: November 18, 2013, 05:39:12 PM »

I have a theory! Basically the impedance of a plate varies with frequency, depending on where the modes of resonance are placed. So different sizes of soundboard would have different impedances at different frequencies. The impedance ratio between two systems is a measure of how easily vibration can pass between them. If too much energy passes from the reed-block system into the soundboard, it would sound muffled and stodgy. If too little passes then it could sound harsh and brittle. Having a larger soundboard means that the energy that is absorbed will be at different frequencies and magnitudes.

However, nothing is that simple. In actual fact, changing anything about the system changes everything. That is only really true for free areas of soundboard, which rarely occur. Having strong or weak coupling between the block and soundboard changes the impedance ratio and the impedance of the plate isn't meaningful unless you take into account the blocks. So everything is interconnected. Vague generalisations are about all I can manage.

Personally, I find that Hohner reeds can be a little harsh, so I would prefer a wooden soundboard to an alu one.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: adding a 3rd voice to an Erica
« Reply #16 on: November 18, 2013, 05:41:02 PM »

Hi Lars and Owen!

below are a couple of photos of the 3-Voice Ericas under construction ... new ply soundboards installed.

For now, I'll stick with wood soundboards - though I do use aluminium for sliders...

Lars, if you are intending using the Corso reedblocks etc - beware! Remember that the chambers/reed/action spacings of the Corso are different from the Erica and Pokerwork. So the Erica action wouldn't marry with the Corso reedblocks ...

But its a problem that is probably 'negotiable'!
 
(By the way - if you look closely at the Grey Double-Ray, you can see it's designed as a 22 button instrument (11+11) ... Steve likes an extra button on his C#/D boxes ... low D/G)

cheers!

Mike
« Last Edit: November 18, 2013, 05:45:42 PM by Microbot »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: adding a 3rd voice to an Erica
« Reply #17 on: November 18, 2013, 05:45:04 PM »

I have a theory! Basically the impedance of a plate varies with frequency,  ...

However, nothing is that simple. In actual fact, changing anything about the system changes everything.

And I have a hunch that another significant change would be the volume of free space inside the instrument which might also have an influence on the sound.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: adding a 3rd voice to an Erica
« Reply #18 on: November 18, 2013, 05:47:45 PM »

I have a theory! Basically the impedance of a plate varies with frequency,  ...

However, nothing is that simple. In actual fact, changing anything about the system changes everything.

And I have a hunch that another significant change would be the volume of free space inside the instrument which might also have an influence on the sound.

absolutely agree with that Theo!

Mike
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: adding a 3rd voice to an Erica
« Reply #19 on: November 18, 2013, 05:55:50 PM »

Quote from: Theo
And I have a hunch that another significant change would be the volume of free space inside the instrument which might also have an influence on the sound.

absolutely agree with that Theo!

Mike

If that were true, there'd be a significant change in sound as the bellows moved close to the fully closed position. I can't say I've ever noticed that happen.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal