Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: adding a 3rd voice to an Erica  (Read 5138 times)

0 Members and 1 Guest are viewing this topic.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: adding a 3rd voice to an Erica
« Reply #20 on: November 18, 2013, 06:13:14 PM »

If that were true, there'd be a significant change in sound as the bellows moved close to the fully closed position. I can't say I've ever noticed that happen.
It does happen. With a sensitive electronic tuner (e.g. one of those strobe types) and playing a single steady note, you can see a change in pitch - perhaps 0.5 to 1 cent - as the bellows move into, or away from, the fully closed position. It's not normally detectable during ordinary playing and most people can't distinguish pitch changes that small anyway. But it can be something you need to take into account when trying to set up an instrument with 'Dedic/Viennese' tuning and where small pitch changes can have a noticeable effect on the tremolo rate, especially on the higher-pitched reeds.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: adding a 3rd voice to an Erica
« Reply #21 on: November 18, 2013, 06:18:27 PM »

Quote from: Theo
And I have a hunch that another significant change would be the volume of free space inside the instrument which might also have an influence on the sound.

absolutely agree with that Theo!

Mike

If that were true, there'd be a significant change in sound as the bellows moved close to the fully closed position. I can't say I've ever noticed that happen.

Good spot Steve ... also (more in line with Theo's point I'd guess) if you remove the mid-reedblock from a 3-voice instrument with 3 reedblocks - blocking off the soundboard holes for that reedblock - there is a noticeable change in tone. This suggests it is less the total internal volume (which does of course increase/decrease with bellows movement) and more the space immediately around and inbetween the reedblocks ... ie the space within the casing.

In other words, occupying the internal space with additional reedblocks affects tone.

cheers

Mike
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: adding a 3rd voice to an Erica
« Reply #22 on: November 18, 2013, 06:39:59 PM »

I was thinking along the lines Mike describes, the region adjacent to the reeds is where sound is first reflected, and the distance might have some influence.  I certainly am aware that a large three voice box eg a Mory, has a much different tone from say a Tommy, both of which have the same configuration if treble reeds.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: adding a 3rd voice to an Erica
« Reply #23 on: November 18, 2013, 07:59:33 PM »

Any particular reason for the square holes for the 3rd block ?
(other than having the CNC to do them !)
Logged

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: adding a 3rd voice to an Erica
« Reply #24 on: November 18, 2013, 08:04:48 PM »

I certainly am aware that a large three voice box eg a Mory, has a much different tone from say a Tommy, both of which have the same configuration if treble reeds.

In this respect it will be interesting to see whether the MMM Double-Ray has very different characteristics from a Double-Ray deluxe. Sean McComiskey has one of the deluxe jobs, set up by Martin Quinn, that has a magnificent sound - a sound to rival an old Paolo, in fact. That's what Mike is shooting for with this particular "old grey" (the box, not me).

BTW ukebert did you mean "nodes of resistance" rather than modes? Not that I understand what you are saying - I just wanted to let you know that someone was reading carefully. (:)

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: adding a 3rd voice to an Erica
« Reply #25 on: November 18, 2013, 08:23:03 PM »

Any particular reason for the square holes for the 3rd block ?
(other than having the CNC to do them !)

Actually, the CNC prefers round holes! Getting the square holes requires a very fine cutter ... the reason for designing them is that, for any given required area - a square hole has smaller external dimensions than a circle - the circular holes in the soundboard are to match with the original reedblocks (with round holes), the square holes to match with the new (third) reedblock ... and by using square holes in this, the dimensions of the reedblock can be minimised ...

... which if you think about it relates directly to Theo's point, and the quest of trying to retain the original tone!!!!

cheers

Mike
Logged

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: adding a 3rd voice to an Erica
« Reply #26 on: November 18, 2013, 08:53:08 PM »

That is an interesting point regarding how the 'open' surface area surrounding the reed blocks can affect the accordion's tone and volume. I once had a celluloid covered Weltmeister two-row such as the one below. They used the same body dimensions to make a three-row, and possibly a PA. Before I played the two-row, my instinct was that a bellows large enough to drive a three-rower should push a very big sound from 2/3 as many reeds, but it was exceedingly quiet in spite of having the reed gaps adjusted. It had other problems and was a very "bad" instrument, but that's another issue. The three-row I inspected was considerably louder. Mystery solved?

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: adding a 3rd voice to an Erica
« Reply #27 on: November 19, 2013, 09:32:32 AM »

I certainly am aware that a large three voice box eg a Mory, has a much different tone from say a Tommy, both of which have the same configuration if treble reeds.

In this respect it will be interesting to see whether the MMM Double-Ray has very different characteristics from a Double-Ray deluxe. Sean McComiskey has one of the deluxe jobs, set up by Martin Quinn, that has a magnificent sound - a sound to rival an old Paolo, in fact. That's what Mike is shooting for with this particular "old grey" (the box, not me).

BTW ukebert did you mean "nodes of resistance" rather than modes? Not that I understand what you are saying - I just wanted to let you know that someone was reading carefully. (:)

Nope, modes of resonance. Any plate will resonate at particular frequencies. This is a Bad Thing for accordions. But the amount of vibration which a plate will absorb at the frequencies that we are interested in depends on the positions of those resonances. If that makes sense.

I did make the point about free area of soundboards - although looking back it wasn't made clearly enough. This is what comes of dashing off posts just before I leave work! Yes, having a large area of unused palletboard makes a huge difference to the tone, because in simple terms, there is suddenly much more material which can absorb lower frequency vibration. For a tauter instrument I think that you want less free area.

But as I said, nothing is that simple. It really depends on the reeds that you've got in there and on the design of the block and all sorts of other things. Everything is interconnected.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: adding a 3rd voice to an Erica
« Reply #28 on: November 19, 2013, 03:23:02 PM »

It could perhaps be done, but tricky. To fit three blocks you'd need them to be slim, and close together (to ensure the inside row of pallets will open enough if using the original mechanism). By just adding holes to the existing soundboard, the outside block will be very close to the bellows and might not fit, and the middle block will have to be rather wide to use the existing holes. I found that making a new soundboard made most sense.
Logged

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: adding a 3rd voice to an Erica
« Reply #29 on: November 19, 2013, 03:50:03 PM »

Hi Aradru,

Hmmm ... I've not worked on a Busilacchio - but if the soundboard is ply, you can meet significant problems in attempting to drill/ream out additional holes. There is a tendency for the wood to splinter. It's not just a selection of the right tools, it's a process you need to be thoroughly familiar with before you can do a neat job. I do it on bass soundboards of Pressed Woods and Erikas to make 12-bass conversions. But believe me - I've learned the hard way - I've made my mistakes and had to replace entire soundboards! If you are doing this for 'first time' - one or two slips and you can badly damage a beautiful instrument ...

Also, you need to consider the overall feasibility and plan the conversion - which will depend on the internal spacing of the casing and the bellows, reedblock dimension, the dimensions of the action and its function, including the critical matter of adequate pallet-lift etc ...

This all sounds negative - sorry! I am not trying to put you off - I want to urge caution and forethought. There's nothing worse than doing a 'passable' job, only to conclude - Hmmm if I had another of those Busilacchios I could do it really welll!!!

I'd definitely get in touch with Lars, who has himself converted a 2 to 3 voice Busilacchio.... aah whilst I was writing this Lars, has just added his reply above!!! I agree with all his points...

In terms of the soundboard, you could experiment on an old breaker instrument with similar grade of wood???

cheers

Mike
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal