Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Spring not working on D/G Pokerwork  (Read 2530 times)

0 Members and 1 Guest are viewing this topic.

RobLandberger

  • Member
  • *
  • Offline Offline
  • Posts: 13
Spring not working on D/G Pokerwork
« on: November 20, 2013, 01:30:53 PM »

Hi,

The spring of the G button suddenly stopped working on the G row of my D/G Pokerwork. Does this sound like an easy or difficult job to repair myself? How do I get to the mechanism, once I've removed the grill?

Any help would be welcome!

Cheers,

Rob
Logged

RobLandberger

  • Member
  • *
  • Offline Offline
  • Posts: 13
Spring not working on D/G Pokerwork
« Reply #1 on: November 20, 2013, 01:46:26 PM »

Hi,

the G button (button 3) on the G row of my Pokerwork has suddenly stopped working. Any clues plz as to how to fix?

Cheers

Rob
Logged

OwenG

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 297
Re: Spring not working on D/G Pokerwork
« Reply #2 on: November 20, 2013, 03:34:51 PM »

Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Spring not working on D/G Pokerwork
« Reply #3 on: November 20, 2013, 03:40:33 PM »

Here is a summary:

1 remove grill
2 separate bellows from treble end
3 remove two screw holding fingerboard and remove fingerboard
4 release all 21 springs on the mechanism
5 undo the screws that hold the mechanism
5 lift out the mechanism and screw it down to a flat piece of scrap wood.
6 pull out the axle rod from one end while at the same time feeding in a second wire from the opposite end to hold the levers and springs in place.
7 when you reach the broken spring replace it with one of the correct thickness
8 push the axle rod back in while withdrawing the spare wire
reverse the rest of the strip down process
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Hohner Pokerwork D/G buttons
« Reply #4 on: November 20, 2013, 08:26:10 PM »

It's not so much difficult as time consuming and fiddly.  Drop the whole end off the bellows (pull the pins out) and you'll find two screws which hold the keyboard in place.  Unscrew these and the keyboard can be wriggled off the keys, but be careful as the screws on more modern versions are made of very inferior metal and the slot can become deformed.  You now have the whole of the treble action exposed.  It is held on by a number of small screws, but each pallet is held in place by the tension of a spring, these need to be unhooked or else the tension will rip the screws out once you start to move them.  With the screws released, undo the mounting screws and the action will lift off complete from the soundboard.

At this point, I screw the action onto an old breadboard to avoid getting things twisted as you push and pull at the bits.  Ideally, you ned a replacement pivot rod, although it can afford to be a little smaller than the original - pull the real one out and slide the "replacement" after it to hold things in place until you reach the key with the broken spring.  Allowing a gap will let the key and spring pop out.  Fit the new spring and get the key back in place then slide the pivot rod back into place, displacing the "replacement as you go.  Screw the action back onto the soundboard , hook the springs back under tension and refit all the other bits.  It can be a bit of a fiddle to get the keyboard over the buttons, though.

With a bit of practice, the whole operation can be a leisurely half hour job.  My chinese box had three break in the first few months so I got quite proficient, but none have gone since.  I think a few of the springs had nicks in them that were missed by quality control (if there is one!).

Rob.
Logged

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Hohner Pokerwork D/G buttons
« Reply #5 on: November 20, 2013, 08:51:47 PM »

Somewhere in another thread there are good pictures of this.
I think the thread was re: replacing Pokerwork keyboards  ( :Ph )
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: Hohner Pokerwork D/G buttons
« Reply #6 on: November 20, 2013, 10:33:54 PM »

Pikey does the job with an elastic band. Stupid boy!  :-*
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner Pokerwork D/G buttons
« Reply #7 on: November 20, 2013, 10:57:58 PM »

[[Admin]]

The same question was posed and answered earlier today in the construction and repair forum. 

It is pointless to ask the same question twice in two different places on melnet, it just results in extra effort for members replying to questions that have been answered already, and makes extra work for the forum moderators too in tidying up the mess. 

Please don't.

I've now merged the two topics.
« Last Edit: November 20, 2013, 11:31:50 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

RobLandberger

  • Member
  • *
  • Offline Offline
  • Posts: 13
Re: Spring not working on D/G Pokerwork
« Reply #8 on: November 21, 2013, 11:06:38 AM »

Thanks to all for all your advice.
Apologies for posting in wrong place, Theo...still learning.
Love the website and all the help that's so willingly available.

Rob
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Spring not working on D/G Pokerwork
« Reply #9 on: November 21, 2013, 11:09:51 AM »

Springs available here, but as Theo said, measure the broken springs wire gauge as the G and D row springs use different gauge wire.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Spring not working on D/G Pokerwork
« Reply #10 on: November 21, 2013, 12:25:23 PM »

You don't really need to measure the spring,  just tell Charlie whether it is inside row or outside and he will supply the correct one. Inside row 0.5mm, outside row 0.55mm diameter wire.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

RobLandberger

  • Member
  • *
  • Offline Offline
  • Posts: 13
Re: Spring not working on D/G Pokerwork
« Reply #11 on: November 21, 2013, 02:16:47 PM »

Cheers, Theo and Lester.
Already ordered the springs from Charlie, (including spares in case others go!) and have ordered for both sizes.
Thanks again for your help.

Rob
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal