Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Weltmeister "pokerwork"  (Read 3843 times)

0 Members and 1 Guest are viewing this topic.

Happyhank

  • Member
  • *
  • Offline Offline
  • Posts: 34
  • Rank Beginner - G/C Pokerwork
Weltmeister "pokerwork"
« on: November 28, 2013, 02:29:07 PM »

I'm curious about this Weltmeister on ebay.

http://www.ebay.co.uk/itm/Rare-Vintage-Weltmeister-Wiener-W-21-Melodeon-D-G-Folk-Music-Accordian-Mint-/151176364105?pt=UK_MusicalInstr_Keyboard_RL&hash=item2332d04049

Would this be comparable to, better, worse than a similar vintage Hohner?

Also, I have seen this particular "Pokerwork" paint job -- that is, this specific design or pattern -- on other unidentified boxes. Can one assume that this design was proprietary to Weltmeister?


Weltmeister Wiener P851 by hankins.greg, on Flickr

The asking price does seem a bit steep . . .

Thanks!

Greg
Logged
Rank Beginner - G/C Pokerwork
Town Creek, North Carolina

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Weltmeister "pokerwork"
« Reply #1 on: November 28, 2013, 03:21:11 PM »

These model are very variable in quality, but even at their best they would not be as good as a Hohner.  Reed quality is usually ok, but the keyboard and treble action is poor and if a spring breaks it is very difficult to repair. An the price is way way too high. The seller seems to be an antique dealer, so not surprising the price isn't right.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Re: Weltmeister "pokerwork"
« Reply #2 on: November 28, 2013, 03:39:43 PM »

Looks like a 86W. Are there two different models or is it incorrectly labeled W21?
Logged
Sean McGinnis
Bordentown City, NJ, USA

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Weltmeister "pokerwork"
« Reply #3 on: November 28, 2013, 03:59:34 PM »

I think the design is intended basically as an imitation of the Pokerwork design (notionally, I believe, a decoration worked into the wood using a hot poker).

This particular guy is in Sherborne - they're a bit rural out there  ;D

But worth watching out, if you're looking for a Pokerwork, that you're not looking at one of these.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Helena Handcart

  • Hero Member
  • *****
  • Online Online
  • Posts: 2452
  • Saltarelle Nell
Re: Weltmeister "pokerwork"
« Reply #4 on: November 28, 2013, 04:07:15 PM »

Wow, the price is way, way too high.  I've played a couple of these pokerworkalikes and both were distinctly inferior when compared with the Hohner boxes.
Logged
Saltarelle Le Romané  | Saltarelle Nuage | Oakwood | various elderly Hohners

Happyhank

  • Member
  • *
  • Offline Offline
  • Posts: 34
  • Rank Beginner - G/C Pokerwork
Re: Weltmeister "pokerwork"
« Reply #5 on: November 28, 2013, 04:10:16 PM »

I was curious about the propriety nature of the design because I saw one with the same design for sale in Nashville, Tennessee, by a guy who thought it might be an old "Horner." (Amazing how many folks make that particular spelling mistake even when the photograph in there listing clearly shows "Hohner" on the top of the box.)

In any case, based on Theo's comment, it appears these would best be avoided at pretty much any price.

Greg
Logged
Rank Beginner - G/C Pokerwork
Town Creek, North Carolina

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Weltmeister "pokerwork"
« Reply #6 on: November 28, 2013, 04:22:45 PM »


In any case, based on Theo's comment, it appears these would best be avoided at pretty much any price.

Greg

Absolutely - I've played several of these at one time or another, and personally I wouldn't pay 600 pence for one (well, maybe I would - 6 quid would be an OK price for some usable spares.  No "sick squid" responses, please!).

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Weltmeister "pokerwork"
« Reply #7 on: November 28, 2013, 04:24:44 PM »

Looks like a 86W. Are there two different models or is it incorrectly labeled W21?

The 86W is quite a decent box, but it has a different shaped keyboard, and has the Weltmeister name.  I'm reasonably sure this is from the time of the DDR which is when the worst examples were made.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: Weltmeister "pokerwork"
« Reply #8 on: November 28, 2013, 05:02:37 PM »

Having recently gone through the aggro of replacing keyboard springs on one of these I'd say don't touch it with a ten foot pole, not even at well under half of that price. They're horrible.
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Weltmeister "pokerwork"
« Reply #9 on: December 31, 2013, 07:54:53 AM »

Not that hard to do the springs. You need to pop the button off, and  slide out the key rod. I would be happier if the buttons were mounted in a removable manner , say screwed on buttons.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: Weltmeister "pokerwork"
« Reply #10 on: January 01, 2014, 12:25:17 PM »

Thanks, I'd hoped there must be an easier way . . . BUT, on this particular specimen the key rod was absolutely immovable by any normal methods. 

I eventually milled out the slot in the back of the keyboard a fraction to relieve the pressure on the rod in order to be able to slide it out, then replaced it with a fractionally bigger diameter axle that was a snug sliding fit so could be easily removed and replaced in future.
Rather than pop all the buttons off to get the keys out I machined the back out of the keyboard and made a flush fitted removable back panel.

It was a lot of work, but I had happily told the friend who owns it that the broken springs could easily be replaced without first having established quite what that would involve! A lesson learned, and I enjoy a challenge :)
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Weltmeister "pokerwork"
« Reply #11 on: January 01, 2014, 01:03:05 PM »

Trying to pull out the rod to fix a broken spring is usually not a good idea. If it moves at all, you will most likely damage the keyboard itself. The springs are anchored in small holes in the wooden levers. They have a tendency to break at that exact point, leaving a small part in that very hole, which consequently has become useless. I always fix this problem by unscrewing the keyboard and drilling a new, virtually invisible hole (about 0.6 mm) through the bottom of the keyboard  into the lever. This makes it much easier to place the new intact spring.
« Last Edit: January 01, 2014, 01:05:25 PM by diatonix »
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Weltmeister "pokerwork"
« Reply #12 on: January 01, 2014, 07:45:17 PM »

Never had a problem getting the rods out, but the technique with drilling the holes sounds interesting.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal