Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Switching reed blocks  (Read 11503 times)

0 Members and 1 Guest are viewing this topic.

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Switching reed blocks
« on: December 05, 2013, 11:24:46 PM »

Given the price of a high quality Italian melodeon, it strikes me that it would make sense to own a single box & buy reed block in different tunings that could be switched when wanting to play in a different key. This would also allow for more compact traveling. Has anybody tried this? What are the potential problems? How much would a complete 21 button/ 8 bass reed set cost from Castagnari?
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Switching reed blocks
« Reply #1 on: December 06, 2013, 01:28:17 AM »

This is an interesting idea but it would not suit me personally as I quite often like to switch between D/G and C/F tunings in a single playing session - e.g. I play a D/G box along with others and a C/F box for accompanying singing.
 
I've no idea what a replacement set of reed blocks from Castagnari might cost or even if they would supply them, but a couple of potential problems occur to me straight away:

1. The replacement reed blocks would have to have exactly identical dimensions to fit properly inside the single instrument. I've no doubt this would be possible to achieve, but it would only require a slight inconsistency, say, in the spacing of the air entry ports, to throw the response/tuning out.

2. Repeated disassembly/assembly of the ends of the instrument to change the reed blocks would eventually cause wear on the bellows pins holes, leading to loose pins. Similarly the rebate around the bellows frame could become worn more rapidly, leading to potential air leaks.

A far better option would be to buy a 3-row instrument in G/C/F or A/D/G.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: Switching reed blocks
« Reply #2 on: December 06, 2013, 04:11:25 AM »

Quote
1. The replacement reed blocks would have to have exactly identical dimensions to fit properly inside the single instrument. I've no doubt this would be possible to achieve, but it would only require a slight inconsistency, say, in the spacing of the air entry ports, to throw the response/tuning out.

2. Repeated disassembly/assembly of the ends of the instrument to change the reed blocks would eventually cause wear on the bellows pins holes, leading to loose pins. Similarly the rebate around the bellows frame could become worn more rapidly, leading to potential air leaks.

A far better option would be to buy a 3-row instrument in G/C/F or A/D/G.

It really doesn't seem like it should be that much of a problem - it ought to be possible to construct the casing/blocks to withstand repeated disassembly/assembly - certainly if the box was designed with that idea to start with.

A 3 row isn't the same thing as a 2 row - obviously heavier & bulkier to play & to transport. I picture just having an additional little case with the extra reed blocks inside.

Quote
This is offered as an extra by Doug Briggs. The prices are quoted here.

That's the sort of thing I had in mind. I guess it would make even MORE sense in the case of a Briggs! £950 for a set of a mano reeds seems quite reasonable & certainly more affordable than shelling out another £5,100. There you have it: 2 Briggs melodeons without the bulk of 2 boxes!
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Switching reed blocks
« Reply #3 on: December 06, 2013, 07:52:11 AM »

There you have it: 2 Briggs melodeons without the bulk of 2 boxes!

But with the enormous inconvenience of having to dismantle the melodeon and remove/reinstall reed blocks every time you want a different key set. I would think it would be a non-starter in a session environment myself.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Switching reed blocks
« Reply #4 on: December 06, 2013, 07:59:16 AM »

Its not a new idea.   100 years ago concertina makers would occasionally make a concertina with a spare set of reed pans.  This wasn't so much to change the key, as the to change the pitch standard in the days before concert pitch was agreed, or widely accepted.

It would be an impractical thing for me though.  The two row diatonic is inherently a limited instrument, and I have no problem living with that.  Fiddle players at sessions here will occasionally throw in a tune in E or Bâ™­ which I treat as an opportunity to listen and enjoy the music. You don't have to play everything.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Switching reed blocks
« Reply #5 on: December 06, 2013, 08:15:49 AM »

A 3 row isn't the same thing as a 2 row - obviously heavier & bulkier to play & to transport.
Not necessarily. The modern Castagnari Benny is a delightfully compact 3-row instrument. At 3.7 kg it is only slightly heavier than the 2-voice, 2-row Laura (3.5 kg). A friend who is also member of this forum has two - one in GCF and one in ADG and often takes both along to sessions. The sound is good and full from both ends; no compromises on the basses or chords.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Switching reed blocks
« Reply #6 on: December 06, 2013, 08:23:00 AM »

I wouldn't want to be handling reed blocks more than necessary.

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Re: Switching reed blocks
« Reply #7 on: December 06, 2013, 10:57:50 AM »

I don't think the idea of the Briggs spare reed blocks is to be switching every time you switch keys. The only person that I know that plays one is an Irish player who plays B/C in sessions but has a set of C/C# for performance as his band is one that likes to play in Eb concert tuning instead of the regular D.

Like mentioned before its cheaper to buy extra reedblock for this reason as opposed go shelling out another £5100. I agree it would be very inconvenient to switch when changing keys like the tunes vs songs tunings mentioned above.
Logged
Sean McGinnis
Bordentown City, NJ, USA

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Switching reed blocks
« Reply #8 on: December 06, 2013, 02:58:02 PM »

Tejano players in the US call this a "dos tonos" box. Switches on the treble end allow the player to switch between reed blocks, preventing him from breaking the gasket seal each time. This type of accordion is offered from the factory by some manufacturers.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Switching reed blocks
« Reply #9 on: December 06, 2013, 04:19:34 PM »

Presumably that would add to the bulk and weight of the box even more than going from a 2-row to a 3-row?  Sort of equivalent to the weight, if not quite the size, of a 4-row, in fact?

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Switching reed blocks
« Reply #10 on: December 06, 2013, 04:42:30 PM »

The one that I played was a Gabb and didn't seem terribly heavy, although it had some heft to it. I should mention that I'm not accustomed to very much 3-row playing so the weight was noticeable but it didn't seem to me that anyone accustomed to playing a 3-row with two shoulder straps should find it a deterrent. Tejano players get on with them, and standing up. A similar conversion or a variation of it could probably be wangled with a 2-row accordion, with less effect on the weight.

FWIW and maybe a topic for another discussion: Has anyone experimented with PVC foam tape as opposed to neoprene? PVC has better compression recovery than neoprene. If not too thick to slip between bellows and chassis, it seems like a better choice for accordion gaskets that may be broken several times. I've used regular neoprene gasket tape from a hardware supplier and it was identical to the tape I used to buy from an accordion spares dealer.

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: Switching reed blocks
« Reply #11 on: December 06, 2013, 06:19:19 PM »

I'm surprised at the objections to this simple concept. It might reflect the difference in playing experience. I've never played in a "session".  :'(

I switch boxes purely for the pleasure of playing in a different key & hearing a different tone, & the advantage of learning a tune by ear from a clip in the same key. So I wouldn't be concerned about switching backwards & forwards on the fly, but every now & then switching reed blocks for a different sound.  In any case, switching blocks shouldn't take more than a couple of minutes.

It's interesting that Briggs offers this option - the amount of care & expense that goes into the basic box construction obviously makes it a very worthwhile proposition.

On a related, but distinct topic: why do accordions typically use pins rather than screws to secure the bellows? Screws would seem to offer a stronger, more secure attachment.
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Re: Switching reed blocks
« Reply #12 on: December 06, 2013, 06:23:26 PM »

I'm surprised at the objections to this simple concept. It might reflect the difference in playing experience. I've never played in a "session".  :'(

I switch boxes purely for the pleasure of playing in a different key & hearing a different tone, & the advantage of learning a tune by ear from a clip in the same key. So I wouldn't be concerned about switching backwards & forwards on the fly, but every now & then switching reed blocks for a different sound.  In any case, switching blocks shouldn't take more than a couple of minutes.

It's interesting that Briggs offers this option - the amount of care & expense that goes into the basic box construction obviously makes it a very worthwhile proposition.

On a related, but distinct topic: why do accordions typically use pins rather than screws to secure the bellows? Screws would seem to offer a stronger, more secure attachment.

I'm not sure if this is the real reason but in this How It's Made video they say its simply tradition.

I understand the concept of playing tunes in different keys. There is a session tune that I recently learned that is Dmix and I'm now making it my mission to learn in Bmix because I heard someone play it in that key and to me it sounds so much better (and not only because the person playing it is much better than me. I started and just like the lower more mellow tone). As a semi-tone player this is something I can do without switching the reedblocks but I can see this would be a problem with a quad/quin-tone
Logged
Sean McGinnis
Bordentown City, NJ, USA

MatlockBather

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 131
  • B/C and proud
Re: Switching reed blocks
« Reply #13 on: December 06, 2013, 07:07:51 PM »

Could you not use stops to tune to a different key rather than change the tone? Rather than drop in a set of LM reeds, you could bring in a pair in another key and close off the pair in the first key. Use the base stop to do the same at the other end?

Or get one of the digital jobbies...
Logged

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Switching reed blocks
« Reply #14 on: December 06, 2013, 07:46:03 PM »

I'm surprised at the objections to this simple concept. It might reflect the difference in playing experience. I've never played in a "session".  :'(

I switch boxes purely for the pleasure of playing in a different key & hearing a different tone, & the advantage of learning a tune by ear from a clip in the same key. So I wouldn't be concerned about switching backwards & forwards on the fly, but every now & then switching reed blocks for a different sound.  In any case, switching blocks shouldn't take more than a couple of minutes.

It's interesting that Briggs offers this option - the amount of care & expense that goes into the basic box construction obviously makes it a very worthwhile proposition.

On a related, but distinct topic: why do accordions typically use pins rather than screws to secure the bellows? Screws would seem to offer a stronger, more secure attachment.

No objections here. It's a great idea, one I've played with myself, but the problem is breaking that gasket seal each time you want to switch out a reed block. Aside from Steve's good point that the second reed block must be made to exactly the same specs, the accordion is eventually going to start leaking from the gasket so it's far from an ideal way to do it. That's why I suggested the dos tonos accordion because it preserves the gasket seal and may be purchased as a new accordion from a good maker.

The dos tonos accordion (you call it something else, doesn't matter) is a single 3-row diatonic accordion that uses couplers to change the key of each row without compromising the gasket seal -- same thing that is accomplished by changing the reed blocks. You just push a button and Bam! new key. The compromise is that you have to want to play a 3-row, and kinda have to like rhinestones. 8) Plenty are available on the used market in the United States, including models originally issued as standard that were refitted for the job. Reyes Forum has classifieds (wade in and say 'hey' first, search old threads, etc.), otherwise you have to contact a dealer who specializes in instruments for the Tejano crowd.

Regarding screws replacing pins: it seems to me that they would be overkill as far as bellows attachments go because they only need to hold the bellows in place, a job that pins do just fine. Early models of accordion had transverse screws that went through the cabinet and into the bellows frame. I once thought this seemed like a better idea but now I disagree. The push/pull forces acting against the bellows pins only do so in a very small area so they are plenty strong. Using screws allows you to remove the bellows more often, I guess, but then there's the issue of the gasket being broken. That's why I inquired about PVC versus neoprene, which has a "shorter" memory.

Cross-posting with MatlockBather above, this accordion would do just that. And it could probably be arranged for a 2-row by a skilled technician who is willing to take the job.

Cooper

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 705
  • Gaillrd G/C/#,Casta Allain8 GC,Lofft CF, giord ad
    • Cooper's homepage
Re: Switching reed blocks
« Reply #15 on: December 06, 2013, 08:12:43 PM »

I have thought about this as well,...if you want the extra blocks inbuilt it will be a lot heavier box. Lots of the intrinsic positives of a 2row would then be negated. You should perhaps better play a chromaccordian? Then you have all keys... Or a 3row with the third being accidentals? Plus, would the basses be changed as well? Or is it you just dont use the left hand?

I have thought about buying a second set of reedblocks as well, but decided it against it for all the reasons above. I do however think that it shouldnt be undoable to build some box where you can switch the blcoks from the outside. Making a window where you can slide them in or out. Like switching your memory card from your camera.

W
Logged
Please correct my English, it's been a while, and i like to learn.
And don't be so polite! I know i must be typing tons of stuff that a native speaker would say differently...please enlighten me.

www.wouterkuyper.nl
www.lirio.nl
www.trekzakacademie.nl

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Re: Switching reed blocks
« Reply #16 on: December 06, 2013, 08:26:53 PM »

You should perhaps better play a chromaccordian? Then you have all keys... Or a 3row with the third being accidentals? Plus, would the basses be changed as well? Or is it you just dont use the left hand?

It's about time to bring up the B/C/C#?
Logged
Sean McGinnis
Bordentown City, NJ, USA

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Switching reed blocks
« Reply #17 on: December 06, 2013, 08:38:50 PM »

There is a story, which may be apocryphal, that a guy in a band in my area modded his pokerwork so that it had an air tight access flap on the top of the treble end and slide in reed blocks. He could flip open the flap, slide out one set of blocks and slide in another. He reputedly didn't need to play bases in the band as it had an electric bassists. 

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Switching reed blocks
« Reply #18 on: December 06, 2013, 10:18:41 PM »

Its been done before!.  The  pokerwork player in a band that used to be at Whitby regularly many years ago  - ?toc Bleu or something like that  had  sawn the  end in half vertically  and hinged the 2 halves together with , I  think< piano hinge ( maybe because he could not find melodeon hinge!)  .  A simple catch secured  the 2 halves together in a completely airtight fashion.  The reedblocks were retained  by very quick release clips and he carried a selection of reedblocks in different keys in  a quiver like what bow and arrowists use for th'arrows.

He could change reedblocks in a matter of seconds and I remember him  demonstrating this in the Elsinore session.

Can anybody throw more light on this 'conversion'?

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: Switching reed blocks
« Reply #19 on: December 06, 2013, 10:39:15 PM »

I had originally thought about getting extra reed blocks to fit a Pokerwork, but then decided it wasn't worth it, as it's easy enough to buy a second-hand Pokerwork for less than the price of a new set of Hohner reed blocks. This is less true of a Castagnari (& certainly a Briggs!) where you're paying a lot more for the quality of the mechanism, the bellows &, of course the craftsmanship. I didn't take into account the gasket being an issue, but would it really be a significant problem? Replacing a gasket every now & then isn't a big deal, in any case.

I really don't feel that a 3 row (or extra reed blocks inside the casing) offers the same thing. An ADG or a GCF wouldn't be the same as having the option of a set of DG blocks & a set of GC, for example.

Being able to switch reed blocks really would seem to exploit the inherent advantages of a 2 row melodeon - a loud, powerful, compact instrument - while side stepping (to a certain degree) the major disadvantage - the limitations of it's diatonic scale.
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal