Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Broken Lever  (Read 2592 times)

0 Members and 1 Guest are viewing this topic.

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Broken Lever
« on: December 06, 2013, 12:59:57 PM »

I'm not sure what the technical term for this piece is but there is a piece of wood. one end has the button on it and the other end attaches to the pallet that closes of the hole to the reed. There is a bar that goes through it and all the others in the keyboard.

Anyone one of mine broke. It pretty much is broken in half right where the rod would go through it. I disassembled my keyboard and took it out and used some wood glue and clamped it overnight to hope it will fix it. If not is it possible to order a spare lever? It's on a Weltmeister accordion.


As a side note, I found a good tool to use to take out the rod in the keyboard. I had some of these laying around the house and it seems to be the perfect diameter for the rod. I put it in one end and used the handle of a screw driver to gently tap it out.
Logged
Sean McGinnis
Bordentown City, NJ, USA

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Broken Lever
« Reply #1 on: December 06, 2013, 04:26:30 PM »

I had some of these laying around the house

Don't we all?...... ::) :|glug
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Broken Lever
« Reply #2 on: December 06, 2013, 05:39:55 PM »

Do you have a micrometer or calipers or any way to accurately measure the diameter of the rod? I have some stock and will give you a piece when you come to Rochester next week if I have the right size. If not, bring the piece with you and I can measure for you. Also measure the length you need. If you are in a hurry welding supply companies have welding rod in various diameters and it is cheap. They should have brass, stainless steel and steel (copper plated).

Scott
Logged
too many boxes...please buy one, or two, or

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Re: Broken Lever
« Reply #3 on: December 06, 2013, 06:15:37 PM »

Oops sorry my description might not have been good enough. The rod itself is fine, it was the wooden lever that attaches to it that broke
Logged
Sean McGinnis
Bordentown City, NJ, USA

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Broken Lever
« Reply #4 on: December 06, 2013, 07:30:00 PM »

Deltasimon, if you can't find a Welty source to send a replacement, if you send that broken one to me, I can make you a copy, you may or may not have to do a little sanding to fit the slot.  I have doubts that gluing it back together will hold.

Bryan

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Broken Lever
« Reply #5 on: December 06, 2013, 07:54:20 PM »

I have doubts that gluing it back together will hold.

Well, maybe, maybe not. It will depend on a number of factors - how clean the break is, how well the parts of the lever fit back together, the available gluing area, the adhesive chosen, and the quality of the timber, to name but five.  I recently had a guitar blown off its stand by a strong wind and the head was snapped off as it hit the ground. My fellow musicians were gloomy at the instrument's prospects (not worried about my feelings, you'll notice!) and had it written off. However, on examining the beast the next day the break was reasonably clean and the head fitted snugly back into position. With some careful tidying up, some Titebond II (wonderful stuff - I wouldn't be without it), some very careful clamping with suitable cauls, a lot of patience letting it dry really thoroughly and even more time and patience filling, rubbing down and matching the finish, the repair is mechanically stronger than the original and apart from witness lines if you look carefully, almost undetectable.  I don't know if Weltmeister levers are made of the same grade of mahogany as my Gibson guitar neck, but I certainly wouldn't dismiss the possibility of gluing it back up without at least giving it a go.  Depends how much effort you think the job's worth.

Graham
« Last Edit: December 06, 2013, 07:56:36 PM by GPS »
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Re: Broken Lever
« Reply #6 on: December 06, 2013, 08:24:09 PM »

I had a similar break in a guitar. The neck snapped (it was my first guitar so a very much beginner's instrument) and the break went with the tension from the strings. I tried a few different kinds of epoxies and super strength glues and nothing worked and finally someone told me to try cheap elmer's wood glue. I glued it down and clamped it up for like a week and it's still going strong. I think that was in 2006 so the wood glue is holding out pretty well.

I highly doubt the Weltmeister lever is mahogany. I'm not a woodworker but it seems to be something cheap and soft. The split wasn't clean but it broke completely in half over the hole for the rod. I glued together both ends and clamped it while making sure the rod could still fit through the hole. When I try it out I'll update the thread to see if it worked or not. I have some pictures at home that I wanted to post but don't have an SD card port on the computer I'm currently on so when I get home and can upload them the break will make a lot more sense.
Logged
Sean McGinnis
Bordentown City, NJ, USA

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Broken Lever
« Reply #7 on: December 06, 2013, 08:44:23 PM »

I'd have a lot more confidence in a piece that was broken off by force and reglued than one that broke in normal use, across the grain at that.  Wooden levers should have very little cross grain and to break like that means a weak spot, or bad piece all together to me.  And to glue back together, the way I'm picturing it, you are gluing end grain to end grain on something that will get repeated pressure across the break, weak at best. But, no harm in trying, it may have broke in a crack that is now fixed.  But either way, offer stands if it comes to that. 

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Re: Broken Lever
« Reply #8 on: December 06, 2013, 10:56:38 PM »

Well I couldn't get the focus right so its difficult to see so I traced a line over where the crack is.

It seems to be working so far but in order to remove the lever from the keyboard I had to take the button off which is glued on. I'm regluing it so tomorrow it should be able to be tested better

Here is the picture You might need a google account to view it. I'm not very sure how that works.
Logged
Sean McGinnis
Bordentown City, NJ, USA

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Broken Lever
« Reply #9 on: December 07, 2013, 12:18:21 AM »

I can't open the photo. I misread your previous note so I realize now it's the wood part that's at issue. I have many spare hohner levers but no Weltmeister.
Logged
too many boxes...please buy one, or two, or

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Broken Lever
« Reply #10 on: December 07, 2013, 01:09:51 AM »

I can't open the photo...
Click on the small, downward-pointing arrow head near the upper right corner. Choose 'slideshow'.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal