Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Roland FR-18 bass strap bracket internal mount cracks?  (Read 4241 times)

0 Members and 1 Guest are viewing this topic.

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Roland FR-18 bass strap bracket internal mount cracks?
« on: January 03, 2014, 07:28:32 PM »

I noticed yesterday that my FR-18 seemed to be using much more air than usual even on the minimal valve setting, which is what I use for my style of playing (Irish traditional).

I opened up the bass side and found that the entire top strap bracket internal mount structure had cracks throughout radiating from the strap bracket screw holes and was leaking like crazy. I've attempted to repair it with epoxy in the cracks and over the entire structure and will also wrap the structure with tie wraps to help stabilize and reinforce it. I purchased it new, hardly used it at all, it's never left the house and I've played it probably all of 4 hours in the time I've had it.

It's out of warranty, so worst case is if it catastrophically fails, I'll have to see about getting a whole new plastic from Roland for the bass inner structure.

Here's a shot of the plastic structure after the epoxy showing the area that had all kinds of cracks:



I'm curious if anyone else has had this issue with their FR-18 or has any suggestions for a more robust repair.

Michael
Logged

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland fr18 diatonic accordion - user group
« Reply #1 on: January 03, 2014, 07:46:19 PM »

I noticed yesterday that my FR-18 seemed to be using much more air than usual even on the minimal valve setting, which is what I use for my style of playing (Irish traditional).

I opened up the bass side and found that the entire top strap bracket internal mount structure had cracks throughout radiating from the strap bracket screw holes and was leaking like crazy. I've attempted to repair it with epoxy in the cracks and over the entire structure and will also wrap the structure with tie wraps to help stabilize and reinforce it. I purchased it new, hardly used it at all, it's never left the house and I've played it probably all of 4 hours in the time I've had it.

It's out of warranty, so worst case is if it catastrophically fails, I'll have to see about getting a whole new plastic from Roland for the bass inner structure.

Here's a shot of the plastic structure after the epoxy showing the area that had all kinds of cracks:

http://farm8.staticflickr.com/7322/11736862816_d86e639189_b_d.jpg

I'm curious if anyone else has had this issue with their FR-18 or has any suggestions for a more robust repair.

Thanks,

Michael
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Roland FR-18 bass strap bracket internal mount cracks?
« Reply #2 on: January 03, 2014, 07:56:18 PM »

Rees Wesson did work on his to replace the air button and I seem to remember him saying the plastic was a bit flimsy.

http://forum.melodeon.net/index.php/topic,7311.msg99589.html#msg99589

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland FR-18 bass strap bracket internal mount cracks?
« Reply #3 on: January 03, 2014, 08:17:20 PM »

After opening it up for the first time, I'm inclined to agree. There's some really thin plastic around the bass strap attach points internally, didn't take much of a crack to make the instrument unplayable. Hopefully, the epoxy and tie wraps will strengthen things enough to keep it from happening again, may wrap the other side with tie wraps as a preventive measure as well.
« Last Edit: January 04, 2014, 05:45:36 PM by seisiuneer »
Logged

dunlustin

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 127
Re: Roland FR-18 bass strap bracket internal mount cracks?
« Reply #4 on: January 04, 2014, 09:45:12 AM »

I have read of identical problems elsewhere but can't remember more than that.
Would it be worth asking Roland?
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Roland FR-18 bass strap bracket internal mount cracks?
« Reply #5 on: January 04, 2014, 05:44:45 PM »

If you have to repair it again, I would use some carbon fiber mat and epoxy to build it up and distribute the stress over a larger area.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland FR-18 bass strap bracket internal mount cracks?
« Reply #6 on: January 04, 2014, 08:13:23 PM »

Just reporting back... The epoxy and tie-wrap repair seems to have been successful, it's airtight again and both bass bracket mounts are now reinforced. Hopefully that will hold for a good long time. If it doesn't, I'll build up a new mount based on Samuel Austin's suggested modification with wood and wood paste.

If Roland does the right thing and sends me a new Cassa Bassi plastic molding, I'll probably pre-modify it before installation.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Roland FR-18 bass strap bracket internal mount cracks?
« Reply #7 on: January 04, 2014, 11:55:10 PM »


If Roland does the right thing and sends me a new Cassa Bassi plastic molding, I'll probably pre-modify it before installation.

Good plan. I was shocked to find how thin this plastic is.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland FR-18 bass strap bracket internal mount cracks?
« Reply #8 on: January 05, 2014, 02:25:29 AM »

Me too. I'll never consider lifting the instrument just with the bass strap again as I might with a real accordion. The FR18 is only about 12 lbs, I would imagine this problem could be much worse on the much heavier piano-based V-Accordions if the internal bass strap mount design is remotely similar.

What I'm curious about is how long this has been going on. Probably well over a year. Now that I have it epoxied and wrapped with no additional air leakage, the whole instrument is way more fun to play.
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Roland FR-18 bass strap bracket internal mount cracks?
« Reply #9 on: January 06, 2014, 05:31:11 PM »

I am actually surprised that more regular accordions don't have more bass strap problems. The adjuster is typically held with two small wood screws attached to a small glued in wood block, and an accordion can easily weigh 22lb.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland FR-18 bass strap bracket internal mount cracks?
« Reply #10 on: January 08, 2014, 12:42:56 AM »

Heard back from Roland tech support, the entire bass side piece that cracked can be replaced relatively inexpensively if my epoxy and tie-wrap repair doesn't hold.

If you have an FR-18, this information may be useful to you in the future:

Roland Product Support (Roland Corporation U.S.)
Jan 06 05:02 PM

Hi Michael,

The part # K2018138 is in stock and the price is $127.20. You can order this directly from our Customer Support department at 323-890-3700 ext 7005. They are available Monday through Friday between the hours of 8:30am and 5:00pm Pacific Standard time.

Best Regards,

Product Support
Roland Corp. U.S.

Michael Eskin
Jan 03 04:47 PM

Now that I've looked at the exploded diagram, it's the full large plastic piece that makes up the entire "Cassa Bassi" labeled as #5 in the diagram, the part number is K2018318. The parts you mentioned mount to the "Cassa Bassi", and they have caused it to develop the cracks where they attach.

Would you please let me know the price to replace the part #K2018318?

Thank you,

Michael
Logged

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland FR-18 bass strap bracket internal mount cracks?
« Reply #11 on: January 09, 2014, 11:16:19 PM »

I opened up the bass side of my FR-18 to check to see if the repair was holding. Looks good so far!

While I had it opened up, I took some photos of the repair work (epoxy + tie-wraps)

http://www.flickr.com/photos/eskin/sets/72157639602223613/

This is the side that had the cracks which are now fixed with the epoxy but quite visible in the photos.

I also reinforced the other side mount tower (no cracks on that side) with tie wraps as well to provide some additional strength.
Logged

Skipy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 171
Re: Roland FR-18 bass strap bracket internal mount cracks?
« Reply #12 on: January 12, 2014, 12:00:29 PM »

I'm sorry to hear of your ordeal Michael :( I really hope that your repair holds and thanks for sharing!

I finally got round to opening up my Roland and having checked both bass strap tower mounts, I'm please to report that I can see no signs of any cracks.

However, not that it's any consolation to you I know but I must confess that I wouldn't lift any of my boxes by any individual strap, be it bass or shoulder. Depending on how it is laying, i.e. on it's bass legs on the floor/table or in it's bag, flat on a low pub stool or in it's case, I find myself lifting with the two shoulder straps initially but only enough to get my other hand under the box or through the bass strap to share the weight!

I have little faith in those three small wood screws used to secure a shoulder strap bracket and a lot less faith in Roland's flimsy plastic  ::)

I'm sure many do but the thought of lifting a weighty box that only has one shoulder strap by that strap alone, that's secured by those tiny screws, makes me shiver..... :'(

These boxes are our babies, would you lift a baby by its arm alone?   :D

On a side note; If you were to replace the part #K2018318, would that be the whole internal part that fits inside the bass end and appears to be secured by 20 screws? If so, I suppose the price quoted isn't too outrageous, albeit very annoying!

I'd be curious to see the exploded diagram.

Kind regards and good luck  ;)

Robin

« Last Edit: January 12, 2014, 02:00:39 PM by Skipy »
Logged
Saltarelle Solstice 12 B/C/C#, Hohner Trichord III B/C/C#. 

I can't imagine life without my melodeons!
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal