Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 3 [4]   Go Down

Author Topic: Melodeon tuning tools  (Read 13542 times)

0 Members and 1 Guest are viewing this topic.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Melodeon tuning tools
« Reply #60 on: March 13, 2014, 01:46:35 PM »

ok thx

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Melodeon tuning tools
« Reply #61 on: March 14, 2014, 02:32:42 PM »

With any of the hard steel materials the tool works best with regular touching up on a diamond sharpening plate, or a diamond file to keep to cutting edge keen.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Melodeon tuning tools
« Reply #62 on: March 15, 2014, 12:27:47 AM »

It should be pointed (sic) out that your scratcher should have a flat end not a pointed one. To achieve this, grind to a point and then flatten by (as Theo says) touching up on a diamond file, holding the scratcher at 90 degrees to the file.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Melodeon tuning tools
« Reply #63 on: March 15, 2014, 08:02:45 PM »

It should be pointed (sic) out that your scratcher should have a flat end not a pointed one. To achieve this, grind to a point and then flatten by (as Theo says) touching up on a diamond file, holding the scratcher at 90 degrees to the file.

I thought I'd already made that clear!  :D

Grinding on a high speed wheel? Place drill bit in a vice with the twist end pointing upward and give it a sharp sideways tap with a hammer, the drill is so hard it snaps cleanly. Fit the straight shank of the drill into a scratcher handle or a pin vice and dress the broken end flat and square on a diamond file and it's good to go.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Melodeon tuning tools
« Reply #64 on: March 16, 2014, 09:46:36 AM »

Sorry, missed that  :-[
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com
Pages: 1 2 3 [4]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal