Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner club modell II  (Read 3524 times)

0 Members and 1 Guest are viewing this topic.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Hohner club modell II
« on: January 13, 2014, 05:19:43 PM »

I've got a club modell II and I think I've got most of the answers I need re refurbishment from this wonderful forum. Except:
1) The body is a bit tatty with dents/scrapes/wear here and there. I'm thinking of painting (spraying) it to tidy it up. Is it better to leave it as it is, with its lettering and identity? I'm in two minds about this (has Lester got a box painted in black?).
2) I have thought about swapping the reeds for DG, but this would cost me a fair few quid, so might not do this. Would DG reeds fit the CF blocks? If I did do this, would it be worth pushing boat out and getting, what, some cagnoni reeds? Or would that be a case of dressing up mutton as lamb?

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner club modell II
« Reply #1 on: January 13, 2014, 05:34:14 PM »

Hi Roger

I've done lots of these for various people so I'll share some thoughts with you.

1) wood finish. I quite like the signs of wear that these boxes acquire, and I would usually just make sure everything is clean, and if I felt it needed freshening up I sometimes just give the whole thing a few coats of shellac polish - usually button polish which is a suitable tan colour.   If you do end up doing a full re-finish my preference would be to use a finish that still allows the wood to show.

2) Reeds.  Decide what tuning you need - CF or DG.  CF sounds great in these boxes, so I would only convert if you really need another DG.   I have one that I fitted with DG Cagnoni reeds about 8 years ago, which was my main box until quite recently.  Cagnoni make several different grades of reeds, mine are tipo a mano, and I would not want to use a lower grade.  DG reeds will fit, though you will have to make a few simple alterations to the blocks to shorten some chambers, by putting in filling pieces. If you use Italian reeds you will find that on a small number of the lowest reeds you have to carve out some wood to lengthen the chambers.  With 4th button start there will be less filling required, and more enlarging.

Italian reeds sound different from Hohner, and modern Hohner reeds sound different from the ones used when your Club was built.

You pays your money and you makes your choice!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Hohner club modell II
« Reply #2 on: January 13, 2014, 06:05:22 PM »

Hi Theo,

Thanks!
I think I'll keep the CF reeds. However, someone filched the ED pair from the C row and one of the BC reeds is broken, plus I'm planning to declub it, so the question is...will modern hohner reeds stick out like a sore thumb among the period reeds.? Unless I can source some old reeds.. (Do you have any?)

Sage Herb

  • Steve Harrison
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 762
  • Slaithwaite, UK
    • The Black Box Band
Re: Hohner club modell II
« Reply #3 on: January 13, 2014, 06:37:08 PM »

Great boxes! I have 8 of them in various keys and don't care what they look like. I keep thinking that I ought to use something else as my main dance and session box, but always finish up going back to these.

Hope you enjoy yours
Steve
Logged
Hohner Erikas & Club 2s
Hohner gob-harps:
Vega Senator 5-string banjo; Alex Burns plectrum guitar

Black Box Band - www.theblackboxband.co.uk
Annie Dearman & Steve Harrison - www.dearmanharrison.co.uk
Phoenix - www.phoenixdanceband.co.uk
http://soundcloud.com/sage-herb

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Hohner club modell II
« Reply #4 on: January 13, 2014, 07:29:22 PM »

Unless I can source some old reeds.. (Do you have any?)

If you're prepared to do a little retuning old Hohner PAs are a great source of period reeds; you can still pick up an instrument for a few quid (though admittedly not as cheaply as you could 4 or 5 years back) and you'll also get a selection of reusable spare screws & fittings. probably a bellows you can use in a tuning rig, and a bit of kindling if you have a wood-burner! Not only that, but you get the educational value and sense of satisfaction that comes with retuning a unisonoric pair to a bisonoric one - you can get a B/C pair. for instance, from either a B or C PA reedplate by flattening (if it's a C) or sharpening (if it's a B) one side.  I have a Bâ™­/Eâ™­ Club II and I love it. I've retaped the bellows and patched a couple of tiny leaks, but otherwise I've left the casework with all its wear, dents and inimitable aged look; just a thorough clean and polish.

Best of luck
Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Hohner club modell II
« Reply #5 on: January 13, 2014, 07:53:29 PM »

Great, thanks. I've just bought another one from fleabag....a modell III.  (:) which I guess is a sort of early Corona III.
« Last Edit: January 13, 2014, 08:51:10 PM by RogerThomas »
Logged

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Hohner club modell II
« Reply #6 on: January 13, 2014, 09:20:27 PM »

Unless I can source some old reeds.. (Do you have any?)

This brings out two of the glorious points about old Hohners!
1: Spare parts are often quite easy to source.
2: Period reeds are often in C/F which is sometimes replaced, leaving heaps of nice old reeds wrapped up in workshops across the world.

I think a simple request here should get you the reeds you need. If you have trouble finding them locally, I think I have a good few sets of C/F reeds of various types and ages around, and I could dig out the singles you need for you.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Hohner club modell II
« Reply #7 on: January 14, 2014, 09:29:08 AM »

Unless I can source some old reeds.. (Do you have any?)

This brings out two of the glorious points about old Hohners!
1: Spare parts are often quite easy to source.
2: Period reeds are often in C/F which is sometimes replaced, leaving heaps of nice old reeds wrapped up in workshops across the world.

I think a simple request here should get you the reeds you need. If you have trouble finding them locally, I think I have a good few sets of C/F reeds of various types and ages around, and I could dig out the singles you need for you.

Thanks for that Lars. I'll try asking. I am curious though: would modern Hohner reeds sound very different? Or different enough so that they are noticeable.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Hohner club modell II
« Reply #8 on: January 14, 2014, 10:55:15 AM »

My Club II certainly sounds much sweeter than a 2915 or a 1040, but whether that's down to the composition of the reeds, the smaller holes in the palletboard (let's not go there again!) or the lower Bâ™­/Eâ™­ tuning I couldn't say.

Graham
« Last Edit: January 14, 2014, 04:26:00 PM by GPS »
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Hohner club modell II
« Reply #9 on: January 14, 2014, 02:53:08 PM »

Unless I can source some old reeds.. (Do you have any?)

This brings out two of the glorious points about old Hohners!
1: Spare parts are often quite easy to source.
2: Period reeds are often in C/F which is sometimes replaced, leaving heaps of nice old reeds wrapped up in workshops across the world.

I think a simple request here should get you the reeds you need. If you have trouble finding them locally, I think I have a good few sets of C/F reeds of various types and ages around, and I could dig out the singles you need for you.

Thanks for that Lars. I'll try asking. I am curious though: would modern Hohner reeds sound very different? Or different enough so that they are noticeable.

I replaced a damaged reed on a 50 yr old Corona with a modern Hohner reed and it sounds fine.  The Corona does not have the zinc reed plates though.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Hohner club modell II
« Reply #10 on: January 15, 2014, 07:47:03 PM »

Ah...so old reed plates are zinc and modern plates are...?

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner club modell II
« Reply #11 on: January 15, 2014, 07:54:01 PM »

Ah...so old reed plates are zinc and modern plates are...?

Aluminium.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal