Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: How it's done - cutting bass end casing and button holes  (Read 1843 times)

0 Members and 1 Guest are viewing this topic.

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
How it's done - cutting bass end casing and button holes
« on: January 26, 2014, 09:57:50 AM »

See http://m.youtube.com/watch?v=5k6Av3-SNZ4

Courtesy of Bergflodt accordions (possibly inspired by the burned dinner thread here)?
   
Logged
  _       _    _      _ 

martinpratt

  • Member
  • *
  • Offline Offline
  • Posts: 25
Re: How it's done - cutting bass end casing and button holes
« Reply #1 on: January 26, 2014, 12:48:14 PM »

That seems to be a very complicated substitute for a jigsaw. I hope the camera operator was wearing Laser protective goggles.
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: How it's done - cutting bass end casing and button holes
« Reply #2 on: January 26, 2014, 03:16:14 PM »

Why do you think so? And how much help would a jigsaw be when it comes to inlay work?
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: How it's done - cutting bass end casing and button holes
« Reply #3 on: January 26, 2014, 04:37:39 PM »

Every year I ask Santa for one of these, but I'm never good enough, I guess.  I wonder what Mr Bergflodt uses to fill the inlay.

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: How it's done - cutting bass end casing and button holes
« Reply #5 on: January 26, 2014, 10:11:58 PM »

Drool.  Not sure if I can look my scroll saw in the eye.

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: How it's done - cutting bass end casing and button holes
« Reply #6 on: January 26, 2014, 11:34:56 PM »

Drool.  Not sure if I can look my scroll saw in the eye.

Drool.  I want one of these (in G and with just intonation tuning, exactly the same) now: https://www.youtube.com/watch?v=EU6BJ4IwxDA

It's all your fault Chris, starting this thread and making me look at diatonix's YouTube clips...   ::)

Is there any hope of a cure?  :(

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: How it's done - cutting bass end casing and button holes
« Reply #7 on: January 27, 2014, 12:04:42 PM »

Anyone know what the power rating on the laser is?

Professional curiosity as I'm a fretworker who's currently looking at taking the plunge.

Steve
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: How it's done - cutting bass end casing and button holes
« Reply #8 on: January 27, 2014, 01:58:43 PM »

60 Watt (engraving area: 610mm X 305mm). Even a 35 W machine will handle most jobs satisfactorily.
Logged

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: How it's done - cutting bass end casing and button holes
« Reply #9 on: January 27, 2014, 02:42:18 PM »

60 Watt (engraving area: 610mm X 305mm). Even a 35 W machine will handle most jobs satisfactorily.

Thanks, that's the power range I was looking at.

Steve
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal