Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: melodeon parts - Reeds  (Read 1416 times)

0 Members and 1 Guest are viewing this topic.

mart0598

  • Member
  • *
  • Offline Offline
  • Posts: 6
melodeon parts - Reeds
« on: January 29, 2014, 12:13:42 AM »

Hi,

I'm planning to restore an antique accordion, as my initiation to melodeon repair and restoration.

I would like to find the best place to order/buy reeds.

I'm starting from an old accordion to which the reeds are alltogether in the same block, and I want to replace this with better reeds. Since I'm beginning in this, I'm not looking for the better ones, but for something that worth to use.

Thanks

Martin
http://www.reverbnation.com/lespiocheux
https://www.songstall.com/lespiocheux
Logged

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: melodeon parts - Reeds
« Reply #1 on: January 29, 2014, 11:26:04 PM »

A restoration uses parts that are original to the accordion or made in their likeness, and retains the original tuning pitch and interval. If you are only trying to make an old accordion playable again, then you can use any reeds you like, as long as you can make them fit on the reed block.

Quote
I'm starting from an old accordion to which the reeds are alltogether in the same block, and I want to replace this with better reeds. Since I'm beginning in this, I'm not looking for the better ones, but for something that worth to use.

Do you mean the set is comprised of reed tongues riveted to a single, long reed plate, and you want to install a new set of reeds that are riveted to individual plates? If so, this requires the construction of a new reed block or modification of an existing one. It might be easier to start with a different accordion. A photo would help!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: melodeon parts - Reeds
« Reply #2 on: January 30, 2014, 10:02:39 AM »

Yes, it is a waste of time and money to fit new individual reed plates to replace the long plate reeds in a typical old German melodeon.  Like putting a modern engine in a 100 year old car.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal