Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Tuning woes  (Read 3552 times)

0 Members and 1 Guest are viewing this topic.

Noodle

  • Louder is better, right?
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 219
  • Occasionally actually helpful
Tuning woes
« on: February 18, 2014, 04:44:19 AM »

After several hours tuning the C# row of a C/C# Erica, I've picked up after a week and the tremolo I set at 443Hz is all over the place again! The room's the same temperature and humidity as when I did the work.

Any sharpening was filed at the tip, any flattening was scratched from the middle of the reed to the base. What could I have done wrong to arrive at this outcome? It's really disheartening.
Logged
Nottingham, UK.

Hohners: HA114 (C), HA114 (G)*, Liliput (C/F), Preciosa (C/F)*, 1040 (G), Imperial. Dino Baffetti Binci III (D/G), Self-made Pariselle 2.6 (G/C), Soberano (C/F), Nopka garmoshka (F#)*.

One day I'll get really good, like those really good players. One day.
*to be fixed

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Tuning woes
« Reply #1 on: February 18, 2014, 06:27:23 AM »

Was it ok, then it drifted after a week?
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Tuning woes
« Reply #2 on: February 18, 2014, 07:18:11 AM »

You shouldn't simply tune all the reeds in your tremolo rows to 443 Hz (if that is what you did): instead use a gradually decreasing cent scale. I'm sure you will find more detailed instructions elsewhere in the forum.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Tuning woes
« Reply #3 on: February 18, 2014, 08:06:43 AM »

Not sure i understand how all can be set to 443, wouldn't that just be for A? Do you mean you set one reed 3 cents above concert pitch?

Noodle

  • Louder is better, right?
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 219
  • Occasionally actually helpful
Re: Tuning woes
« Reply #4 on: February 18, 2014, 10:55:13 AM »

To clarify, I set one bank of reeds to A440 and the sharper bank to 443.

To be honest I'm starting to doubt whether I was actually that close to 443 for some of them as I spent so long working on them as carefully as I couls. I'll have another go at getting them to behave, taking regular breaks. I'll report back later.
Logged
Nottingham, UK.

Hohners: HA114 (C), HA114 (G)*, Liliput (C/F), Preciosa (C/F)*, 1040 (G), Imperial. Dino Baffetti Binci III (D/G), Self-made Pariselle 2.6 (G/C), Soberano (C/F), Nopka garmoshka (F#)*.

One day I'll get really good, like those really good players. One day.
*to be fixed

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Tuning woes
« Reply #5 on: February 18, 2014, 11:01:57 AM »

Did you re-valve before the tuning by any chance? I only ask because I have had similar problems on odd reeds and have traced it to over-exuberant use of glue. I any of the over spill is not fully cleaned off it can creep into the gap between the adjacent reed and the reed plate, you then tune it whilst the glue is soft, go away and the glue hardens a bit and the tuning drifts repeat til bored by the whole thing.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Tuning woes
« Reply #6 on: February 18, 2014, 12:44:10 PM »

Compared with some of the long-established experts on the forum, my experience in tuning work is still fairly new (6 years or thereabouts) and once again I'd like to acknowledge the immense help over this time I've had from several people on this forum, but particularly Theo and Rees. Thank you all!

But in addition to the effect of valves/glue etc. mentioned by Lester in his preceding post, I've come across the following reasons for pitch instability during/after tuning:

1.  Reed tongue rivet loose. It doesn't have to be by much and may not be easily detectable. Also not confined to old reeds; I had a new Binci reed which had a loose rivet and would not hold its pitch - drove me nearly to despair. Remedy is to take out the reed plate, hold the rivet base against a lump of steel (a small anvil is ideal) and gently tap the rivet head with a hammer. Don't over-hammer as this can cause the reed tongue to distort.

2.  Reed plate not firmly attached to the reed block. Wax may be old and not firm, or nails/screws/leather gaskets, if used, may be similarly loose. Again, it may not be an obvious fault.  Remedy is to rewax, or gently re-fix nails/screws, etc.

3. Reed set (gap) may be incorrect or variable. If the gap is too narrow, the reed may speak easily but the pitch may vary noticeably with differing bellows pressure, especially on larger/longer reeds. Try to ensure that your pressure when tuning is going to be within the range encountered in normal playing conditions. Ideally the gap should be set wide enough so that the reed still speaks immediately under low pressure, but not too wide so that the start is delayed or the sound is 'breathy'.

Adjusting the set of the reed can change the pitch by 2 - 3 cents or more, so the response of every reed should be checked prior to tuning and adjusted if necessary (but only after ensuring that all the valves/wax etc., is in order). In some cases I've noticed that adjusting the set of a reed takes a little while to take permanent effect; e.g. the reed may partially return to its former setting over the space of a few hours. The setting process may need to be checked and repeated if necessary.

The corollary of this is that the tuning process can affect the set of a reed, either by excess bending pressure being used (to avoid this, make sure all your tools are sharp) or by redistribution of stresses within the reed tongue following filing. Filing (rather than scratching) the belly of the reed to flatten it can result in the stress redistribution causing the set of the reed to become smaller, so that it may not even speak at first. The remedy is to gently 'ping' the reed tongue after filing and check the gap has returned to its proper setting. All this affects the pitch of the reed slightly, so that tuning becomes a reiterative process; check pitch, file/scratch, check pitch, check gap, re-check pitch, file/scratch, check again, etc. The errors get less on each iteration.

I sometimes think it's a miracle that we can successfully tune reeds at all. Tuning is a compromise, generally speaking. Your final check should be what your ears tell you, not necessarily what your tuning meter says. If it plays and sounds OK, then it probably is!

Hope this helps a bit, and good luck!
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Tuning woes
« Reply #7 on: February 18, 2014, 12:44:57 PM »

Noodle, I would discount any short term temperature or humidity change as the cause, unless you have been playing in the shower.

Did you re-wax the reedplates? If the wax is old, it is possible that you may have loosened them during the tuning process. Immediately after the tuning job the reeds may not have sounded too bad (even allowing for a constant 3 hertz offset), but a bit of playing may well have loosened them even more, which will adversely affect tuning.

Another possibility is that some of the reeds may have started to corrode and/or tear across prior to breaking and your tuning efforts may only have allowed a temporary pitch change; playing will almost certainly have caused further tearing, causing the pitch to flatten once more. Continued playing will result in an eventual clean break and necessitate replacement.

Whatever the cause, I hope you can resolve the problem in due course.



Logged
Tuner/repairer, now retired.

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Tuning woes
« Reply #8 on: February 18, 2014, 12:47:14 PM »

Again: you cannot just tune your tremolo reeds to 443Hz. Tremolo will be too slow in the lower / too fast in the upper range. You must use a decreasing cent scale.
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Tuning woes
« Reply #9 on: February 18, 2014, 02:47:52 PM »

Again: you cannot just tune your tremolo reeds to 443Hz. Tremolo will be too slow in the lower / too fast in the upper range. You must use a decreasing cent scale.

Agreed, but the OP reckons the tuning changed over a one week period, and that was what I and others have commented on. Tuning to a constant 3Hz sharpness, or any other tuning scheme, conventional or otherwise, could not have caused this to happen.
Logged
Tuner/repairer, now retired.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning woes
« Reply #10 on: February 18, 2014, 03:44:42 PM »

What sort of tuning meter did you use?  Most of those available are not very precise(only +/- 1 cent or worse.  I find that fir precise tuning you have to use your ears fir the final stage, and train yourself to count beats on the fundamental.  If you have tuned only using a meter with +/- 1cent precision your 3hz difference at A440 which should be about 13cents, could vary between 11 a15 cents which could sound noticeably off.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Tuning woes
« Reply #11 on: February 18, 2014, 05:22:25 PM »

Theo, I have iStobosoft on this tablet, which seems to be more than another FFT, front ended. eg I can "calibrate" it! It might even count wavefronts?

It offers frequencies in 1/100th Hz, and "cents" again to 2 decimal places. But how accurate is it? Chris
Logged
  _       _    _      _ 

Clive Williams

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3936
    • Home Page
Re: Tuning woes
« Reply #12 on: February 18, 2014, 05:36:05 PM »

...
But in addition to the effect of valves/glue etc. mentioned by Lester in his preceding post, I've come across the following reasons for pitch instability during/after tuning:
...

Blimey, there's a lot of useful knowledge condensed into that one post! Thanks Steve...

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Tuning woes
« Reply #13 on: February 18, 2014, 07:20:25 PM »

I have iStobosoft on this tablet, which seems to be more than another FFT, front ended. eg I can "calibrate" it! It might even count wavefronts?

Any chance of an English translation of that? ;) ???

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Tuning woes
« Reply #14 on: February 18, 2014, 07:47:45 PM »

Very good advice thus far...here's a test for you to try, Noodle. Remove your reedblock, and block the holes on the sharp row of reeds. (Use some painter's masking tape or similar, prepare your tape strip by sticking it down first on some cotton cloth, in order to make the adhesive quite less aggressive). Then replace reedblock and test. Are all the flat reeds in tune? Repeat test by blocking the flat row holes. Does this lot sound okay?
  As Diatonix mentioned, the method you chose to build your tremolo is possibly flawed. As Theo mentioned, you are getting about a 11-13 cent differential to each reed set all the way up the scale. On a G/C box, the lower notes are just about "Hohner" tuned at 13 cents or so, if the notes on the upper end of the scale are 11-13 cents apart, they will be crazy wet!
   You will not only have two rows of reeds that get wetter as you go up the scale, but perhaps two rows in Equal temperament. I can't imagine that sound being very pleasant.

Added: The purpose of the test I suggested was to determine if you tuned the reeds well mechanically. If the individual rows sound decent, then look to your methodology on the tremolo.
« Last Edit: February 18, 2014, 07:53:38 PM by forrest »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning woes
« Reply #15 on: February 18, 2014, 07:54:43 PM »

Yes that was the general direction I was thinking.

Another thought - what are you using to sound the reeds?  You need to be able to produce a sustained but controlled flow of air over the same pressure range as when playing, and you need to be able to sustain the note for long enough for the pitch to stabilise, whic generally takes longest for the lower pitches, which are also the ones which need most air.

It is also necessary to check the tuning inside the instrument at least at the end of the process.

If you don't have a bridge connecting the two reedblock a that can also do strange things to the tremolo, but usually (in my experience) only to one note and usually in the lower octave.

There is more to tuning than at first appears to bed the case!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Tuning woes
« Reply #16 on: February 18, 2014, 08:30:44 PM »

Any chance of an English translation of that? ;) ??? Graham

[start clock] 1, 2, 3 … [hmm, second up so soon! How many was that?]

see above (whole thread) … which is why I'd never tune myself!
Logged
  _       _    _      _ 

Noodle

  • Louder is better, right?
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 219
  • Occasionally actually helpful
Re: Tuning woes
« Reply #17 on: March 06, 2014, 11:42:15 PM »

Thank you for the helpful advice.

Only a couple of valves were replaced, and that was during my second bite of the cherry (after I started this thread).

I hadn't re-waxed either, but I did spot some places where the wax had come away from the reedplates. Someone before me had flooded some of the spaces with wax and some parts had escaped the it. It was the parts with a lot of wax that had been affected, so I sorted some of that out this time around.

I don't have a tuning bellows/table, so all the tuning I do is checked inside the instrument. It's in my plan to build myself a set in the future!



I think my problem was that I was concentrating so hard on listening, without taking a break that I stopped being able to 'hear' what was going on.

I did return to it after a couple of weeks. My tuner (a Korg OT-120 orchestral tuner) can play the tone, so I concentrated on the A first and (by sticking a piece of paper under the sharp and flat side of the reedblock respectively, which was how I was doing it before) used my ears to tune one reed to 440Hz and the other to 443Hz. I used the sound from the tuner to get the rest of the 'in tune' reeds in tune, then the A as a reference for the tremolo.

That seemed to work.
Logged
Nottingham, UK.

Hohners: HA114 (C), HA114 (G)*, Liliput (C/F), Preciosa (C/F)*, 1040 (G), Imperial. Dino Baffetti Binci III (D/G), Self-made Pariselle 2.6 (G/C), Soberano (C/F), Nopka garmoshka (F#)*.

One day I'll get really good, like those really good players. One day.
*to be fixed

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning woes
« Reply #18 on: March 07, 2014, 08:37:27 AM »


I don't have a tuning bellows/table, so all the tuning I do is checked inside the instrument. It's in my plan to build myself a set in the future!


Go you know Emmanuel's trick for mounting the bellows on the workbench while you tune?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Tuning woes
« Reply #19 on: March 07, 2014, 08:40:47 AM »

Any photos of how to attach the bellows?
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal