Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Why are inner rows muffled?  (Read 5179 times)

0 Members and 1 Guest are viewing this topic.

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Why are inner rows muffled?
« on: March 14, 2014, 01:17:04 AM »

And what can be done about it?  My Club Morino doesn't have that problem, but my other 3 rows do, even the Casta.  The Morino solution was two rows of pallets, as I recall.  The culprits are mechanism/keyboard getting in the way, and blocks too close together, again, as I recall.  What can be done about this?  I was reading about all the curious side effects of putting metal straps on top of reed blocks if they aren't there, or repositioning them if they are, and wondering if something hasn't been tried to bring up the volume of inner rows.

And two rows sometimes have this problem, too - a friend's Boxeen, and Adam-T mentioned how the big 4 voice two row Paolos had this problem - mechanism getting in the way?  My friend drilled some holes in the coupler box to see if that helped, as I recall. 

There's always the take-the-grille off solution too - although with my Corona IIIR that helped a bit, but mostly just cranked the overall volume.  How about the opposite tack - say, a grille that's hollow on the bottom but solid metal on top... ::)  You heard it first.
Logged

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Why are inner rows muffled?
« Reply #1 on: March 14, 2014, 01:27:59 AM »

good thinking, but it's a big  'negatory' on that. (old friends "cb" drinking terminology)
I know that you can do better than that? leave the full warp scotty on the outer...give me,  and 'we' on here, something that will boost the inner muffle  soundage volumatic factor (love it!) on the oft' primary inner row....(please)   (whiskey  :|glug)
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Why are inner rows muffled?
« Reply #2 on: March 14, 2014, 03:25:05 AM »

It's one reason why some of us prefer 3-voice Paolo Sopranis - the pallets are directly under the grille, and there aren't any couplers in the way, so they let the sound out much better/more balanced.

(Also, you can tune them wetter because you aren't restricted by the low-octave reed!  >:E)

Post Scriptum: Of course they're also smaller, and lighter than a 4-voice, so easier to play...   ::)

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Why are inner rows muffled?
« Reply #3 on: March 14, 2014, 03:40:24 AM »

triskel....i'm curious ...why three reeds mmm act differently to ...say four lmmm? - are you saying that mid reed is tuned off datum on three voice?
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Why are inner rows muffled?
« Reply #4 on: March 14, 2014, 04:27:34 AM »

No, it's that a lot of tremolo (like + and - 25 cents) will start to "fight" with the low-octave reed. Most tuners don't like to go any more than about + and - 15 cents on a 4-voice box.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Why are inner rows muffled?
« Reply #5 on: March 14, 2014, 08:39:11 AM »

The muffled inner row is fundamentally a design problem.  here are a few measures that reduce the effect - mainly extra holes in the area where the grill meets the fingerboard, or on the back of the fingerboard.  But it's only at the design stage that it can be eliminated. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Why are inner rows muffled?
« Reply #6 on: March 14, 2014, 09:35:16 AM »

Agree with Theo's and triskel's comments in general. Once you start to listen in to the issue, it can get pretty distracting.  But IMO it's often more noticeable to the player (especially when practicing solo in a quiet situation) than it is to a listener, so you might be able to learn to not worry about it as many others have. However, mics do pick up the difference. So for recording or playing mic'd, the "inequality of tone / timbre between the notes from different rows" can also be a problem.

We've talked about the problem, approaches to minimizing it via design, and some set-up tweaks also many times before on this forum.  Yes, grille design (or playing "grille-off"), ventilating the keyboard plate, etc. can have a big effect on this issue (as heard by the player or picked up by a mic).

One point I sometimes mention, that might bear repeating: *to my ears, anyway* the effect of directly gluing a treble reedblock to the soundboard (vs. removeable reedblocks clamped, with gasket) can sometimes seem "opposite and somewhat equal" to the effect of melody pallets that are located down close to the keyboard.

I mean that glued-on melody reedblocks, all other variables being equal, tend to yield a brighter and louder response (in my experience).   I can really hear this difference in some instruments that were made so that some, but not all, of the reedblocks are removeable.  Some of the better-quality recent german concertinas were made like this, and some twentieth-century Italian accordions. In the German concertinas the difference in reedblock attachment can yield a very different timbre between the notes from different button rows. But in some of the Italian accordions, the difference in reedblock attachment can seem to *compensate* for the difference in tone due to pallet position.

I have a few good examples of this last situation, but one excellent set of comparisons includes the boxes shown below (and I've seen many other similar ones over the years). These are all two voice boxes, MM, and all made very similarly; all are designed traditionally so that the pallets of the inside row of buttons are located nearest the keyboard.  Most have both the melody reedblocks removeable and most of them have the typical mellow or "muted" quality we might expect from the notes on the inside row.  But one of these boxes shown below was made to have the reedblock for that inside row of buttons glued directly to the soundboard -- only the other treble reedblock is clamped and removeable -- and in that box the sound from the inside row of buttons / lower row of pallets is very bright and "present," a good match with the sound from the outside button row.

PG,
Logged

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Why are inner rows muffled?
« Reply #7 on: March 14, 2014, 05:57:09 PM »

The Concertone Bb/F I did my accordion repair internship on (not seriously...more like, OK, I'll try dribbling the wax from the top this time...) had the inner row block glued down too, which I considered utterly boneheaded and bizarre until I read Paul's explanation for it in some other thread.  This is a real oldie of a box, wood case, screws/levers instead of bellows pins, traditional stepped keyboard.  The rows are balanced really nicely.

So the muffled rows just need to make better contact with the soundboard, eh?  So, how about some sort of clamping system for that block?  Something to push it down a bit firmly.  You could start with just a metal bar with sponge wrapped around its ends, or bolts with rubber suction cups - something to make contact with the insides of the case.  Have the bar press down on the block from above, see if that makes any difference. 

Or just attach a heavier bar to the top of the block.  Maybe it just needs more mass.  Or, again, bars on the other blocks to balance things out, if bars act as mutes.  Anything's worth a try, although reading profiles of accordion innovators like John Reuther you get the impression that in all likelihood this was all tried back in the 1840s and found wanting.  But who knows.
Logged

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: Why are inner rows muffled?
« Reply #8 on: March 14, 2014, 06:43:54 PM »

Hi KLR, Paul and Theo,

I agree with Paul completely - for the last year I have been using this same idea in the 3-voice instruments I set up ... the innermost row (MM of the G row on most D/Gs) is glued down. Then other 2 reedblocks are removeable as normal.

I have been attempting to build 3-voice pokerworks/pressed Woods and Erikas for nearly 4 years. The original prototypes were great, but suffered from exactly the slightly 'muffled-inner-row' problem KLR describes. As Theo says, this is a 'design issue' and have I tried numerous methods to 'design it out'. I fitted narrower pallets/enlarged the holes/toyed with shiny felt surfacing on pallets/fitted drop-down levers so the pallets were lifted horizontally, rather than angled. Everything 'worked a bit', but even in combination were not completely satisfactory.

The first time I glued down the innermost reedblock, I knew I'd cracked it. There are two elements/effects ... the first, which Paul alludes to, is the matter of volume....the glued down reedblock transmits the vibrations of the reeds direct to the soundboard (Oh yes it IS a soundboard!) and there is a good 10-15% increase in volume (which is approximately what you lose with decreased inner pallet-lift). The other factor is that there is a brightness to the transmitted sound that counteracts the 'dulling' effect of the decreased pallet-lift.

There are some further details and fine-points to the practice of gluing down the inner reedblock ... but essentially ... it is a methodology that has the capacity to solve the problem raised by KLR ....

Below is a link to my most recent Erika D/G 3voice on my soundcloud ... on the recording, I deliberately select tunes that cross rows and I am proud to say (as my own hashest critic) that there is no discernible difference in volume or tone between the inner and outer rows ....

https://soundcloud.com/microbot-2/3-voice-hohner-erika-d-g-lmm

Of course, one reedblock has to be tuned 'in situ' in the box ... but since the other reedblockls are removeable, you don't face the difficulty of a Hohner 114 where you have to work inbetween two glued in reedblocks.

cheers

Mike R
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Why are inner rows muffled?
« Reply #9 on: March 14, 2014, 07:02:53 PM »

....and there is a good 10-15% increase in volume (which is approximately what you lose with decreased inner pallet-lift). The other factor is that there is a brightness to the transmitted sound that counteracts the 'dulling' effect of the decreased pallet-lift.
Mike mentions the decreased pallet lift of the inside row. This definitely contributes to the muffling effect usually due to the much shorter pallet arms on the lever action of the inside row, compared with the longer pallet arms on the outside row levers. For the same amount of button travel, the inner row pallets open with a smaller gap than the outer row pallets. At least - this is the case when the axle for the inner pallets is shared with the outer pallets, i.e. towards the lower (keyboard) edge.

Some action designs get around this by having the inner row pallets on long arms on a separate axle at the top of the pallet board, actuated by an extra lever and 'lug' arrangement which lifts the pallet arm. In this case both inner and outer pallets lift by the same amount and at the same angle, resulting in a much more even volume of sound. Sorry - I don't have any photos of this arrangement but I know that many Saltarelles are designed like this and possibly Paolo Sopranis too.

Having played around with the pallet arm lifting gap on a single axle two row box, I can verify that increased pallet gap on the inner row does indeed even out the sound volume and quality. I don't really know why the double lever system is not a standard design. It makes perfect sense to me.




Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Why are inner rows muffled?
« Reply #10 on: March 14, 2014, 07:05:29 PM »

I don't really know why the double lever system is not a standard design. It makes perfect sense to me.

Cost at a guess  ;)

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Why are inner rows muffled?
« Reply #11 on: March 14, 2014, 07:28:10 PM »

I don't really know why the double lever system is not a standard design. It makes perfect sense to me.

Cost at a guess  ;)
You could be right Lester, although I can't see it making a huge difference in the cost of construction. Perhaps it's more a case of different manufacturers being settled with all the jigs and components, and not wishing to make radical changes.

In my experience, the muffling effect is certainly not really an issue on Castagnari boxes which mostly (as far as I know) have single axles, but they possibly compensate by optimising the grille design, having cut-outs in the keyboard top plate (some models), careful positioning of the reed blocks, and so on.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Why are inner rows muffled?
« Reply #12 on: March 14, 2014, 09:23:51 PM »



I agree with Paul completely - for the last year I have been using this same idea in the 3-voice instruments I set up ... the innermost row (MM of the G row on most D/Gs) is glued down. Then other 2 reedblocks are removeable as normal.

(. . . )
 
The first time I glued down the innermost reedblock, I knew I'd cracked it. There are two elements/effects ... the first, which Paul alludes to, is the matter of volume....the glued down reedblock transmits the vibrations of the reeds direct to the soundboard (Oh yes it IS a soundboard!) and there is a good 10-15% increase in volume (which is approximately what you lose with decreased inner pallet-lift). The other factor is that there is a brightness to the transmitted sound that counteracts the 'dulling' effect of the decreased pallet-lift.

(. . .)

Mike R

Hi Mike,

Great to hear this is working for you!  I agree that both the factors you describe seem to me (subjectively) to be influenced by gluing down a reedblock -- the loudness and the brightness or what I sometimes call "presence" or even "crispness." Going further, I have a "suspicion" even that the response of the reeds may be a bit more immediate when the blocks are glued down. 

This kind of thing might be very hard to quantify in some cases, IMO, because musicians naturally adjust the way they handle an instrument to optimize its performance and sound, to suit their ears . . . so it might be possible sometimes that even when an instrument seems "better" to a player I suspect that it may not necessarily sound measurably better . . . so much as it may "take less effort and attention" by the musician to achieve that good sound and get that quick response that the player wants.

When I first noticed that interesting comparison among a few different Scandalli accordions, one of which had the glued in reedblock and better balance in timbre among the melody notes, I was really pleased because the comparison is so easy to hear and understand in this case. I know I've posted that same photo a few times over the years to illustrate this point.   But it's a phenomenon that I've noticed in many different kinds of free-reed instruments over the years.  If there are any skeptics among the "engineering-oriented" melnetters here, I would consider selling a few of these Scandallis as a package, ready for your experiments or as a demonstration -- good way to spend your start-up funds or your research grants :-)

Mike, for my part, I'll be very interested to try out one of your 3 voice machines at some point!

Keep up the good work,

PG



Logged

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Why are inner rows muffled?
« Reply #13 on: March 14, 2014, 10:56:39 PM »

That Erika sounds wonderful, Mike.

Pretty sure my Trichord has compound action as described.  Ted McGraw's site has a pic of one with this feature:



From Ted's Button Accordion pages.  Holy crap, don't remember him having such a boatload of info there.

My Trichord has good row balance, same with my Club Morino - which just has two rows of pallets.  And also an aluminum soundboard.  No yucky glued blocks with either.  Maybe that metal surfacehelps?  Questions, questions.  Seem to remember that the Shand Morino blog entry explained how they fixed the row balance issue.  The pallets on mine don't open a mile or anything, they are larger but then it has 5 voices at work. 

My Casta Rik has 3 rows of pallets, and muffles, sorry.  I was hoping that part of the $4.2k would go towards eliminating that, too.  Not such a big deal as I mostly cross row everything but now and then I just have to play an arpeggio on the G row and groan slightly before doing so, not to mention push like a son of a b***** to de-murk the volume.  Have no experience with other models from that company, aside from cheapies I've played in stores my other boxes are old Hohners, plus the Venuzio GCF, which is just Hohner after a rebadge.  Forget how that one does balance-wise, the others sure have the muffle problem though. 

So what are my options?  Besides just dealing with it.   >:(  Anybody ever tried fitting a sheet of aluminum over a soundboard/under the (a) block (s)?   Or gluing in a block or two, or three?  Hide glue is wholly reversible, after all.  I mean, besides Mike, of course.  Will perhaps do the deed, after trying some of my less drastic novel solutions.  How about just a bigger/stronger
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Why are inner rows muffled?
« Reply #14 on: March 15, 2014, 12:36:20 AM »

Yep, I've found gluing in reedblocks to be very effective in eliminating a muffled sound - I "cured" a cheap hybrid concertina recently by doing just that. I'm also planning on doing it to my 2-voice Albrecht, though that one also needs the chambering reducing on the M reeds, and maybe a touch of tremolo on them too.

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Why are inner rows muffled?
« Reply #15 on: March 15, 2014, 03:48:28 AM »

Do you glue as much surface as possible, or will just a bead around the edge do the trick?

Yet another notion - glue woodblocks around the troublemaker and mount bars on them to press the reed block down harder.
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Why are inner rows muffled?
« Reply #16 on: March 15, 2014, 08:49:31 AM »

First of all: a "soundboard" is not a soundboard and it's not about "transmitting vibrations". The more rigid the blocks and the "soundboard" the better. By glueing on the blocks not only rigidity improves, at least if one, before doing so, remembers to remove the bottoms of said blocks and of course also their gasket. This will also, most importantly, ensure a shorter and less obstacled/funnelled flow of air and thus yield a stronger sound.
« Last Edit: March 15, 2014, 08:54:26 AM by diatonix »
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Why are inner rows muffled?
« Reply #17 on: March 15, 2014, 09:36:57 AM »

Hi diatonix,

I'm always very interested to hear your thoughts, knowing the amazing sound of the instruments you build.

Possibly you are speaking mainly to Mike, but for my part when I use the word "soundboard" I don't mean to imply that this part of an accordion functions like the soundboard of a guitar, or of a piano, concertina, etc. 

My view is that I think the parts of many different kinds of instruments that have traditionally been called "soundboards" in english function in many different ways so it would be wrong to assume that the name implies a particular function that is the same in every instrument.

In accordions, as mentioned, I have observed a great difference in sound depending on the way the reedblocks are attached to this part (foundation plate?) and I understand that you agree with that observation.

I also agree that I'm talking about a wooden reedblock glued directly to a wooden soundboard with no gasket and no sole on the bottom of the reedblock.

Years ago a friend of mine machined an aluminum base for some reedblocks so they could very accurately mate with a flat aluminum soundboard; these were clamped tightly with no gasket and the metal-metal surface seemed very airtight.  That accordion had a very nice sound and response.  It would be interesting to play and hear an accordion where the soundboard (foundation plate?) and reedblocks were all machined out of one solid block of metal. Do you know if that has ever been tested?

Best regards,

PG
Logged

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Why are inner rows muffled?
« Reply #18 on: March 15, 2014, 05:39:30 PM »

Ted McGraw has pics of a Borsini 3 row where " the inner row of keys operates the middle row of pallets, the middle row of keys operate the outer row of pallets, and the outer row of keys operate the pallets for the inner row. This eliminates the problem with many 3 row button boxes where the sound from the inner row of keys is muted or less crisp than that of the outer row."  Huh, wouldn't that just move the muffling from the inner to the outer row?  Perhaps as it has the lower pitch this is obviated.

Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Why are inner rows muffled?
« Reply #19 on: March 16, 2014, 07:51:08 AM »

Ted McGraw has pics of a Borsini 3 row where " the inner row of keys operates the middle row of pallets, the middle row of keys operate the outer row of pallets, and the outer row of keys operate the pallets for the inner row. This eliminates the problem with many 3 row button boxes where the sound from the inner row of keys is muted or less crisp than that of the outer row."  Huh, wouldn't that just move the muffling from the inner to the outer row?  Perhaps as it has the lower pitch this is obviated.
As I said in an earlier post, I think the muffling problem has as much to do with the smaller amount that the inner pallets open, rather than the actual position of the pallets with respect to the grille/keyboard edge, although the latter can have a partial effect. The ideal thing is for all the pallets to open by the same amount, or as near to that as can be achieved.

In the photo which you show, it looks as if the lowest pallets are opened by the double-lever action, with the axle at the top of the pallet board. This will allow increased opening, by an amount similar to the other two rows of pallets.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal