Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Loose Treble Stops on an old Hohner  (Read 4013 times)

0 Members and 1 Guest are viewing this topic.

martinpratt

  • Member
  • *
  • Offline Offline
  • Posts: 25
Loose Treble Stops on an old Hohner
« on: March 16, 2014, 08:31:37 PM »

I have recently acquired an old Hohner 113 A. Annoyingly one of the stops on the treble doesn't stay "up" very well tending to slide down and shut. I have looked inside and the reed blocks appear to be glued to the base plate, preventing access to the stop mechanism. Any suggestions how to overcome this defect?

 
Logged

tom f

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 112
Re: Loose Treble Stops on an old Hohner
« Reply #1 on: March 16, 2014, 08:42:10 PM »

Hi Martin,
This seems to be a pretty common fault on these models.  I'm not sure what the long term solution is but I got around it by 'figure eighting' a rubber band around the stops that were up and I have seen clothespegs also used to good effect!
Tom
Logged

martinpratt

  • Member
  • *
  • Offline Offline
  • Posts: 25
Re: Loose Treble Stops on an old Hohner
« Reply #2 on: March 16, 2014, 10:23:55 PM »

I have just discovered that if you screw the stop handles a turn or two tighter this effective pulls the stop up a fraction and seems to increase the friction.

Playing one of these old Hohners makes you appreciate the refinement of a modern box such as my Salterelle Connemara.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Loose Treble Stops on an old Hohner
« Reply #3 on: March 16, 2014, 10:34:32 PM »


There are ways of curing this problem but elastic bands are the most common.

There's a really funky method involving magnets which Lester has explained elsewhere on this site.


Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Loose Treble Stops on an old Hohner
« Reply #4 on: March 16, 2014, 11:16:19 PM »

There's a really funky method involving magnets which Lester has explained elsewhere on this site.

I suppose a link would be too much to ask for?  ;D
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Loose Treble Stops on an old Hohner
« Reply #5 on: March 17, 2014, 07:14:09 AM »

I have just discovered that if you screw the stop handles a turn or two tighter this effective pulls the stop up a fraction and seems to increase the friction.


But if you do that you reduce the travel of the slides so they no longer open fully.

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Loose Treble Stops on an old Hohner
« Reply #6 on: March 17, 2014, 07:34:49 AM »

There's a really funky method involving magnets which Lester has explained elsewhere on this site.

I suppose a link would be too much to ask for?  ;D
The link to the Marc Serafini/Lester Bailey method is here. However, Lester's photos which illustrate the process seem to have disappeared.  :(

Martyn White installs grub screws in the edge of the wooden end frame to control the friction on the steel stop shafts.
See here.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Loose Treble Stops on an old Hohner
« Reply #7 on: March 17, 2014, 07:44:20 AM »

I suspect Lester removed the pictures because they showed the holes drilled from the outside, which were very visible.  Drilling the holes from the inner surface is much neater.  You can see the idea in Martyns photos further down the same thread.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Loose Treble Stops on an old Hohner
« Reply #8 on: March 17, 2014, 09:15:38 AM »

Wot I did was to drill 1/4" holes at right angles to the stop's metal rods and insert neodymium magnets.


Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Loose Treble Stops on an old Hohner
« Reply #9 on: March 17, 2014, 09:18:21 AM »

Well worthy of a patent that Lester.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Loose Treble Stops on an old Hohner
« Reply #10 on: March 17, 2014, 10:47:16 AM »

That's ingenious!

I'm about to try the wax method suggested in that other thread, because I have some reed wax (and four Hohner 1-rows in the house) but I don't have any neodymium magnets. But if the wax method fails... I love the simplicity of the hole/magnet/friction approach.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Loose Treble Stops on an old Hohner
« Reply #11 on: March 17, 2014, 11:53:43 AM »

Use traditional clothes pegs.....

 ;)

http://youtu.be/bPh80jY8nqQ
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Sage Herb

  • Steve Harrison
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 762
  • Slaithwaite, UK
    • The Black Box Band
Re: Loose Treble Stops on an old Hohner
« Reply #12 on: March 17, 2014, 12:22:48 PM »

Use traditional clothes pegs.....

http://youtu.be/bPh80jY8nqQ

On which we used to write the name of the band.
Logged
Hohner Erikas & Club 2s
Hohner gob-harps:
Vega Senator 5-string banjo; Alex Burns plectrum guitar

Black Box Band - www.theblackboxband.co.uk
Annie Dearman & Steve Harrison - www.dearmanharrison.co.uk
Phoenix - www.phoenixdanceband.co.uk
http://soundcloud.com/sage-herb

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Loose Treble Stops on an old Hohner
« Reply #13 on: March 17, 2014, 12:33:38 PM »

In case you forgot who you were after a few pints....... ;)
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

TomBom

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 471
Re: Loose Treble Stops on an old Hohner
« Reply #14 on: March 17, 2014, 12:51:32 PM »

Wot I did was to drill 1/4" holes at right angles to the stop's metal rods and insert neodymium magnets.

Do you glue in the magnets or are they just rubbing against the metal rods?
« Last Edit: March 17, 2014, 12:57:35 PM by TomBom »
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Loose Treble Stops on an old Hohner
« Reply #15 on: March 17, 2014, 01:58:25 PM »

Wot I did was to drill 1/4" holes at right angles to the stop's metal rods and insert neodymium magnets.

Do you glue in the magnets or are they just rubbing against the metal rods?

Nope, just popped them in. They work by rubbing agin the metal rods.

TomBom

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 471
Re: Loose Treble Stops on an old Hohner
« Reply #16 on: March 17, 2014, 02:56:11 PM »

OK, thanks. What a great & simple solution!
Logged

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Loose Treble Stops on an old Hohner
« Reply #17 on: March 17, 2014, 03:27:47 PM »

Could you use it to generate electricity, you could power a lamp for those dingy pub sessions so you can see your fingers.  ;).  :||:   :|glug
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Loose Treble Stops on an old Hohner
« Reply #18 on: March 17, 2014, 11:37:10 PM »

Do you glue in the magnets or are they just rubbing against the metal rods?
Nope, just popped them in. They work by rubbing agin the metal rods.

Inspired! I do love simple, elegant solutions to perennial problems. Proper job that is.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Loose Treble Stops on an old Hohner
« Reply #19 on: March 18, 2014, 01:11:34 AM »

Martyn White installs grub screws in the edge of the wooden end frame to control the friction on the steel stop shafts.
See here.

 I hadn't seen Martyns mod and did my own mod just after I got my box. I used screwed brass inserts (coarse thread on the outside with a machine thread on the inside) and nylon grub screws. The nylon grub screws screw into the machine thread. This mean i can adjust without wearing the wood down. Only adjusted once in 18 months :-)
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal