Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Loose Corners  (Read 4313 times)

0 Members and 1 Guest are viewing this topic.

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Loose Corners
« on: March 28, 2014, 02:41:14 AM »

My beloved Pistelli melodeon is starting to shed it's corners. It has always had one or two get a bit loose, and I have stuck them back as needed. But the time has come to properly address the bellows, which need re-taping, and it is imperative that I get the corners fixed first. The corners themselves are in pretty nice condition, and they still fit snug on the bellows, but not snug enough to stay put. There might have been an adhesive of sorts to help them stay put. Should I re-use these with a bit of adhesive (what kind?) and just give them a little extra crimp, or shuck them off and try to match new ones? All constructive comments appreciated! Even jokes, but they better be good.

Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Loose Corners
« Reply #1 on: March 28, 2014, 10:54:53 AM »

Theo once told me that he would go to great lengths to avoid replacing bellows corners. I would just stick them back on because when you ovelap with new bellows tape that will hold them firmly in place.  (:)
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Loose Corners
« Reply #2 on: March 28, 2014, 11:13:32 AM »

True.  New corners never fit quite as well as old ones where the metal and card have been fitted together for years.  Provided of course that the old ones are not cracked or broken.  If the corners are loose take them off and re-fit with some pva before fitting the new tape.  Be careful with crimping, it is very easy to over do it. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Loose Corners
« Reply #3 on: March 29, 2014, 02:23:39 AM »

I love the imagery of "shucking" the corners. Presumably you've played Oyster Girl once too often... 8)
But then, haven't we all... >:E
Logged
Tuner/repairer, now retired.

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Loose Corners
« Reply #4 on: March 29, 2014, 02:36:29 PM »

  If the corners are loose take them off and re-fit with some pva before fitting the new tape.  Be careful with crimping, it is very easy to over do it.

That's good news, Theo...the corners are all in fine condition. And not made of ferrous material either, maybe nickel plated brass. Hmm....now to choose a tape
color.

I love the imagery of "shucking" the corners. Presumably you've played Oyster Girl once too often... 8)
But then, haven't we all... >:E

 That's more of a Pokerwork tune.  (:)  Oysters aside, I think the corners shook loose from the box being played at A444 with about 25 cents of tremolo, how it was before it came my way.
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Loose Corners
« Reply #5 on: March 29, 2014, 02:41:45 PM »

Hmm....now to choose a tape

The body of the box looks jolly, how about a pic of the whole box so we can help you to decide?  (:)
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Loose Corners
« Reply #6 on: March 29, 2014, 04:52:19 PM »

Hmm....now to choose a tape

The body of the box looks jolly, how about a pic of the whole box so we can help you to decide?  (:)

Sure, why not? I had considered a dark green (as original), or possibly antique gold, or even a dark wine (reddish brown). I think there's enough color there already. Pics attached:
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Loose Corners
« Reply #7 on: March 31, 2014, 05:01:50 AM »

Beautiful looking melodeon.
Logged
Tuner/repairer, now retired.

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Loose Corners
« Reply #8 on: March 31, 2014, 10:32:42 AM »

I would definately go with dark green.  :D
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Loose Corners
« Reply #9 on: March 31, 2014, 08:09:23 PM »

Why not play off some of the bright accents in the flowers? I think it would look great if you could match either the red or the yellow. Whichever color you choose, it will look great. That's a stately accordion!

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Loose Corners
« Reply #10 on: March 31, 2014, 11:46:57 PM »

Why not play off some of the bright accents in the flowers? I think it would look great if you could match either the red or the yellow. Whichever color you choose, it will look great. That's a stately accordion!

 My thought too, Christopher. Yes, it's quite handsome, and has a wonderful sound as well. At one point (during a round of old-bellows-tape-removal), I succumbed to weakness and looked into the notion of ordering new bellows. I think I have rejected that notion, and will continue to refurbish the originals. I guess it's more my style to put something of myself into the project than to just order new and install.
   So...here's my plan: strip the rest of the old tape, secure the corners well, and then apply a light very pale yellow wash to the white bellows canvas. I even went so far as to search and speculate applying some Japanese silk-screened Yuzin papers, which could be pretty cool. Right now, I am considering a dark red ribbed tape, burgundy would be great. Not easy to find though. I am going to message Charlie on that. In the US, Accordionlab has a nice color of tape, but it comes in pre-cut strips, and won't work out length-wise  :'(
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Loose Corners
« Reply #11 on: April 01, 2014, 12:57:40 AM »

I have both burgundy and dark green bellows tape if you need it.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Loose Corners
« Reply #12 on: April 01, 2014, 03:19:59 AM »

I have both burgundy and dark green bellows tape if you need it.

Just looked at your site, Kimric. Will send PM.
Logged

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Loose Corners
« Reply #13 on: April 01, 2014, 03:25:21 AM »

Why not play off some of the bright accents in the flowers? I think it would look great if you could match either the red or the yellow. Whichever color you choose, it will look great. That's a stately accordion!

 My thought too, Christopher. Yes, it's quite handsome, and has a wonderful sound as well. At one point (during a round of old-bellows-tape-removal), I succumbed to weakness and looked into the notion of ordering new bellows. I think I have rejected that notion, and will continue to refurbish the originals. I guess it's more my style to put something of myself into the project than to just order new and install.
   So...here's my plan: strip the rest of the old tape, secure the corners well, and then apply a light very pale yellow wash to the white bellows canvas. I even went so far as to search and speculate applying some Japanese silk-screened Yuzin papers, which could be pretty cool. Right now, I am considering a dark red ribbed tape, burgundy would be great. Not easy to find though. I am going to message Charlie on that. In the US, Accordionlab has a nice color of tape, but it comes in pre-cut strips, and won't work out length-wise  :'(

House of Musical Traditions and Accordion Heaven sometimes have colors not listed on their websites. Worth a call, if all else falls through.

What's in the stain you're planning for the bellows? Interesting idea.

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: Loose Corners
« Reply #14 on: April 01, 2014, 07:00:31 AM »

Forrest: what does it say on the buttons?

Love the asymmetric Pistelli lettering - very cool...   8)
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Loose Corners
« Reply #15 on: April 01, 2014, 10:00:28 PM »


What's in the stain you're planning for the bellows? Interesting idea.

  That would be telling, Christopher, but when it starts to focus a bit, I will post something  ;)

Forrest: what does it say on the buttons?
Love the asymmetric Pistelli lettering - very cool...   8)

 The two buttons are really only one switch...pressing 'Armonica' engages the L reeds, pressing 'Celeste' dis-engages the L reeds.
The decoration is all done by hand the designs and lettering on the case are inscribed into the celluloid, and painted.

 
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Loose Corners
« Reply #16 on: April 02, 2014, 01:39:21 AM »

Beautiful looking melodeon.

She's a beauty.

Sounds really nice, too, on your video clips.

PG
Logged

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Loose Corners
« Reply #17 on: April 30, 2014, 03:32:10 AM »

Just checking in to show how far out on a limb I have dared...below shows the aftermath of tape removal...not quite as bad as it looks. The corners literally jumped off of the bellows as the tapes were stripped. Also, I have bailed out of the idea of a water-color treatment of the bellows canvas. Instead, I ordered some Chiogami paper to apply (see sample). 
Logged

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Loose Corners
« Reply #18 on: May 08, 2014, 09:11:54 PM »

Just an update on my bellows re-model. The paper arrived, and was not only lovely, it was very nice material. It is thin and light, but rather strong. After lots of  measuring, cutting, and pasting, the papering is almost complete. Below are before and after pics. The bellows tape just arrived today, but it might be a while before I get to that task.
Logged

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Loose Corners
« Reply #19 on: May 15, 2014, 10:57:38 PM »

OK, I finished getting all of the paper panels cut, fitted, and glued to the bellows, and then the bellows tape arrived. This is my first bellows tape remodel. It was an interesting journey. Thanks to Olav (aka Diatonix 2) for his instructive YouTube tutorial on bellows tape installation. The first side was a bit tricky, but then I got the rhythm, and the technique, and things went along well. My edges did not line up as perfectly as they should have, but I think they are passable. One of my fears came true: the bellows stack is *slightly* thicker than original (about 1/8 inch), even with compressing frequently during the job. This of course does not allow the bellows closure clasps to snap together. I will allow everything to dry and shrink a bit before I attend to that. Below are some photos:
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal